Отзывы о Wi-Fi усилитель сигнала (репитер) NETGEAR WN1000RP

The Bad:Unfortunately the unit that I purchesed "new" from Amazon was manufactured in 2011. The router did not recognize my ATT DSL line. When I called Net Gear for support they said that the unit was too old and no longer supported on the phone.The Good:I contacted Amazon to return the unit. Their support was outstanding! I printed the UPS mail label, taped it to the original box that the unit came in, as instructed. It appears that as soon as the package was scanned as being received at Amazon, the refund was issued to my credit card! I have never seen a simpler, quicker refund - Amazon gets 5 Stars for customer seervice.

I purchased this AP refurbished for less than $20 and am completely satisfied with it. I only need wireless access for guests web browsing with their laptops and one wireless printer that I seldom use. I don't need the latest and greatest 802.11n wireless, I have gigabit ethernet if more bandwidth is needed. I had another one of this same access point several years ago and never had any problems in 4-5 years of use. I lost that one to a house fire, otherwise I would probably still be using it. I don't use it as a bridge, so I can't comment on it's suitability for that.In tests I've run with Iperf on a laptop connected through this AP to my router/firewall (which is a server running pfsense), throughput seems to max out around 16-17Mbit which should be more than sufficient for simple web browsing. I don't think it would be the best for bandwidth intensive usage, but then again what wireless is? Hard to beat good old wired ethernet if bandwidth is your number one priority.I you are looking for a simple, inexpensive AP I'd highly recommend this.

Everything in a review of a device like this is really a review of the device firmware. And the firmware is still in development. Some features, like USB and file sharing, are just starting to work. If you are a Linux guru and want an advanced router, you can have some fun with this right now. If you are a less sophisticated user, it might be better to wait for a later firmware update.As I write this, the router firmware release is V1.1.00.32_1.00.32NA. You can see if there is a later firmware release at Netgear's web site. Router version v1 on that site is for the USA, v2 is for elsewhere.This firmware release did not come in the box. I had to upgrade the firmware - actually, the device offered to upgrade itself when I visited its set-up web page after I'd gotten it working with my DSL connection.The USB port had a black label glued over it, saying that it would work only with an upcoming firmware release. I peeled that off.I am 11000 wire feet from the telephone office, which limits the speed I can get using DSL. This modem synced to my ATT ADSL at a rate higher than my my Zoom Telephonics XV6. 3008 KBPS at 6 dB s/n, vs. about 2600 at 6 dB for the Zoom, which was significantly more flaky at that rate. Actually, the command-line ADSL utility says it is synced at a "max" download rate a bit higher, and a "max" upload rate almost double - it could be that ATT is rate-limiting me, and I never reached their bandwidth cap while using the Zoom.The "Guest" interface configuration for wifi wouldn't work in this firmware version. This is supposed to allow you to provide an open wifi network that doesn't have access to your internal LAN, while also providing a private wifi network for your use that has full LAN access. The USB storage device function wouldn't work because the "create a folder" button was grayed out. Linux gurus will be able to work around this bug, I discuss how later in this review.The box runs warm. You might get longer life by mounting the unit so that it has airflow on all sides.Netgear's release notes for this release are:New Features & Bug Fixes * USB support has been added. This feature can be accessed by clicking on the Basic and Advanced settings under USB Storage, with additional USB Settings available under the Advanced menu. For more details please see the ReadyShare document posted with this firmware release. You may remove the label over the USB port on the back of the unit to access the USB port. * The Reference Manual has been updated and can be accessed by clicking on the Documentation link in the router management interface. * A new Setup CD, version 1.2, has been released which adds Win 7 compatibility and fixes some default settings issues. The revised CD can be found at this link: [...] * Fixed a problem where the WiFi speed limit didn't seem to work with WN511B: Up to 130Mbps was reported as a higher speed by the client. * Fixed a problem where some invalid IP addresses were allowed by router for Remote Management. * Fixed a problem where Port scan attacks were not logged.If you run setup.cgi?todo=debug from the router's web interface, it will enable you to telnet into the router's busybox shell. If you know Linux, you can then make the router do all of the things that the web interface isn't ready to do, and more. For example, I mounted USB storage devices that, due to some bug, the web interface wouldn't handle. I suspect that some very complex routing is possible from the command line.The fact that this is a Linux router is interesting because of the potential for alternative firmware such as that provided by groups like DGTeam and DD-WRT. They enhance the features beyond those provided with the factory firmware, and continue to support the devices with new firmware after the manufacturer has lost interest in its old products. DGTeam does not provide firmware for this model, but DD-WRT supports a different model which is essentially this unit but without ADSL. With the software from both groups it should be possible to cobble together a working alternative firmware for this model. I am the original author of the "busybox" Open Source toolkit used in the router, so I might be able to do that. I bought a second, used unit for development.The router is based on Broadcomm ICs. Broadcomm is known for not releasing Open Source drivers for some of its hardware, although many of their chips have been reverse-engineered and now do have Open Source drivers. We're probably stuck with the proprietary driver for the ADSL modem chip unless someone does a whole lot of work, but I think the wifi chips and ethernet bridge now have open drivers.Once you get into the command-line environment, there's a whole lot of functionality that is not exposed to the less sophisticated user. You can also figure out what the hidden web screens are. There's one to configure IPV6 at ipv6.htm, and one to diagnose ADSL at adsl_test.htm . There is a command-line program to tweak the ADSL parameters and re

INITIAL IMPRESSIONS: This router worked very well at first-fast speeds (65 mbps)-good connection strength (4 bars about 2 rooms away, 2 floors below got about 2 bars)-super easy to configure settings and set up a password (WPA2 PERSONAL-AES- this is not the password, it's the security type)-forwarding ports can be cumbersome, as you have to save and refresh after each one2 MONTHS AFTER PURCHASE:-frequent disconnects from internet, would have to power cycle to get the router to work-static IP devices work fine (game consoles, for example, never disconnected)-dynamic IP devices (laptops, mobile devices) would just not connect to the internetSOLUTION: SET UP A STATIC IP!1.Go to network and sharing center2.Go to wireless adapters, right click wireless adapter and select properties.3.highlight Internet Protocol Version 4 (TCP/IPv4) then click the Properties button.4.Select "Use the following IP address" and enter in the correct IP, Subnet mask, and Default gateway that corresponds with your network setup (go to command prompt and run ipconfig if you need to see those).5.Enter Preferred, Alternate DNS server addresses(I use googles, fast/free: pref:8.8.8.8; alternate:8.8.4.4)[...]

NETGEAR wireless adapter Genie: This product didn't work no matter how many times we tried. Then when we went to Unintall, it refused to uninstall the program. Worked for several hours with our Tech family menbers but it won't allow the program to be uninstalled. it also left two windows on the screen that wouldn't go away. Turned it off and waited a bit, turned it back on and they were still there. Tried everything we could think of. Tried once again to uninstall it.Finally managed to get all the stuff to go away. Not worth the effort, since it didn't work on the laptop we purchaed it for, or for three other laptops of family members..Disappointed and exhausted.

I tried to give this only one star, but the site somehow is giving it two and I can't override it. Although this refurbished router was a bit dingy looking when I received it--it must have been VERY dirty when it was returned by the previous user--it seemed to work fine--for the first two days. (Well, after I figured out how to set it up myself. No documentation was included with the product, and Netgear's website and customer support are a geeky, confused and confusing, mess.) But then on the third morning, my wireless signal was strong, but the line out of the router to my computer wasn't working. I moved the line to the next port, and it runs okay. But for how long? I guess I will have to return it, because they didn't even reply to my message when I reported the problem. UPDATE: Nearing the end of the 30-day warranty period, Port 2 is still functioning, and I only payed $20 for the item, so I am opting to keep it rather than go through the hassle of a return and the search for a replacement because the timing is bad. Not great will have to do for now.

I am new to routers and was able to get it installed ok. My devices pick up the signal from any distance in my home. Have relatives using this brand name and they like them. Manufacturer Refurbished items seem to do pretty good for most people from what I have read. "Refurbished" can have many meanings and if you are not careful you can select a "refurbished" item that has such a low meaning that it is junk. Manufacturer Refurbished which in this case is Netgear refurbished holds a high level of meaning in my book and is a good way to acquire this model of used router.

I recently purchased a netgear wireless router-N300. It arrived on time, well packaged and without apparent damage.My total cost on the item was almost $50, which included shipping. I replaced my older linksys router thinking I was getting more and better wireless coverage. This did not happen, in fact, after over 3 hours on a help line (to India) and $79.00 to Microsoft to clean my computer I still could not get on line, period. It just would not connect even with the "expert" help. So, I re-installed my old Linksys router and an now back on line with the knowledge that the next time I consider changing my Linksis router I will definitely get another Linksis router. Lesson learned.

I've had this router for about two years. During the first few months, this router was the best investment. It was consistent, didn't drop the internet, and reliable. However, that quickly changed. This router became less reliable within six months of purchasing it. Wireless access was iffy, and could not be depended on. The signal became less over time, and it refused to allow me to connect anything wirelessly.Since I had the router over 90 days, the Netgear Customer Service is useless, that is unless I wish to pay them even more money for their useless advice.If you want my advice, avoid netgear. Their customer service is laughable, their products are not that reliable, and their products are inexpensive for a reason.

First I ordered one Media Link adapter from Amazon, which arrived to-day. After proper installation I found that the wireless signal was too weak. Then I went to Staples to get their opinion, and the sales rep. recommended this Netgear N600 Dual Band USB Adapter. I purchased this item from Staples for $40.49. After installing the CD, it worked great and it provided high speed wireless internet signal from my Cable Router, which is about 75 ft. away from the computer using this adapter. I am completely satisfied with this product. It was easy to install.

I picked up this router because it was recommended to me. It was supposed to be "easy CD-less installation." After trying for about an hour to get it working, it would not install, so I called Netgear for assistance. They logged into my computer remotely and informed me that I had a malicious bug on my computer (not true, I scan regularly) and they wanted to charge me $120 to install the router remotely. They pushed it even when I told them I was going to try another product. I still refused to pay it and returned the router to Micro Center where I picked up a Linksys E900 Wireless-N300 Router (E900). Within ten minutes, I had the router installed and a working wireless network.Way to stand behind your product, Netgear.Don't buy this piece of garbage. Buy the much superior Linksys E900 Wireless-N300 Router (E900).

I was having trouble reaching part of my house (upstairs) with a good wifi signal and the phone company had just told me my Westell 327W was too old to receive software update and needed to be replaced. while waiting for their 2nd new router to arrive (the first new one they sent did not work at all)i decided i may need to buy a new modem and router with extended range and solve two problems at the same time. thats when i ordered this one. the two band thing is a good idea and the way they explained it to me is the 5GHz is better for speed and less interference where distance is not important and the 2.4GHZ is the band for that extra distance when thats more important than quality or speed.i have been watching NetFlix on a Roku upstairs for months using my old Westell 327W with no problem (my router is downstairs). the 2.4GHz signal would reach my TV upstairs but i kept getting a Roku warning that the signal was so weak there was gonna be a problem watching movies. the 5GHz signal would not reach upstairs at all.bottom line, using a wifi signal meter app on my Kindle Fire i compared the signal strength of the old Westell 327W and this Netgear Rangemax Dual Band unit and the old Westell signal was stronger anywhere i could get a wifi signal. i returned the Netgear for a refund.Great idea having two bands so you can split your wireless stuff up and use some on both bands but forget about the RangeMax thing as it is no better than the router the phone company provides. there are areas of my house i still can't get a wifi signal into.

OK - I've spent the last 2 days exchanging emails with Netgear Technical Support. They forwarded me a telephone number to speak with a live person; and I just got off the phone with them.He's a bit more of the back story:I bought a Netgear MBNR 3000 3G/4G router to interface with my Pantech UML 290 4G modem. It''s (the modem) is suppose to be supported in the latest firmware update (V1.0.0.72_2.0.12NA), which is installed. I set up the router using the setup wizard. It auto setup all the access information for the Verizon Network, and it recognized the UML290. In fact, the router status pager (looking at router settings) specifically stes that the UML209 is recognized. However, when the router attempted to connect to the Verizon Network it was unable to make the connection. Modem (UML290) works fine on my laptop.I've tried a number of different approaches to get it to work, but to no avail. So as I mentioned, I just got off the phone with Netgear Technical Support. There answer to me (after 30 minutes of conversation & several supervisors later) was:We are sorry, but your modem, the UML 290, is NOT compatible with our product (MBNR3000). :confused: I'm confused because the Netgear knowledge base has the firmware update at the following URL:<...> . Oh well!That's it - end of story.So - if you have the UML290, don't buy the MBNR3000 - it won't work. To bad, I really liked the product.

Uploaded the software, wireless connection said it was excellent. Would barely upload all the photos on a google search. went to youtube same thing slow and intermediate. Reminded me of dial up days. Did about ten fixes that I found online. No help. Tried a different computer, no difference. Was online with tech support for total of 5 hours 3 different times---NO HELP! A friend of mine is a IT guy and referred me to this product. He stated I probably go a bad router. Then when I told him I had Comcast cable internet, he changed his tune and said that there was some issues with these models and comcast. He suggested a belkin N600. Just installed the Belkin. Awesome. Even though my phone doesn't have full bars on wifi in the furthest room from the router, It is still faster than my old router. Haven't tried games or streaming netflix yet.

I purchased a NETGEAR DGND3300 RangeMax Dual Band Wireless-N Router with Built-in DSL Modem for use on an AT&T-based DSL connection. I could not set it up and spent a few hours with customer support in India. The wireless router was very weak, so I bought a very expensive extender.Two of my TV's and macbook air use the wireless.Last night it stopped working. I spent 8 hours (2 pm -10 pm) trying to fix it. I first talked with three levels at Apple Computer who said it was Netgear. I called Netgear but the Indian support said they would call back, and never did. I next called ATT DSL who got it going for a few hours. It failed again, and I used the telephone number for Netgear support I used several years ago to set it up. It was a different telephone number. Guy in India takes over my computer, changes the channel setting from 36 to 11, and reduces to 145 ugh......when the wireless started working the customer support guy SAYS....'IF YOU WANT THIS FIX TO BE PERMANENT, YOU HAVE TO PAY ME!!!!!". I flipped out.....8 hours messing around with their modem/router and then I get held up. Scum company....Netgear...

I should have known from prior experience that you probably don't need to install the software with the installation disk, driver will automatically install when you plug it in, then use network pass or push-button automatic connect. The software did not seem to work correctly, it indicated that there was no internet connection (only home network), thus could not update. The software started up every time the computer booted up, showing up on the screen; could not disable that. Thus I think the software is useless, so I uninstalled it. Did not seem to have any useful functions; what do you need the adapter to do anyway?the adapter works well with my g-network, haven't wandered around the house yet to see how good the range is.

I got this refurbished router from Amazon on-line. The box came without installation CD. However, there is an attachment sheet saying "you may download the installation instruction and software from netgear.com". Then I went to netgear.com to download the software. When I found the software and tried to download, the webpage asked for serial number. I could not find the serial number for this router anywhere. Then I called the 888 support line. A support personnel told me that the refurbished router is not supposed to have a serial number, and to get software download support from him the support charge will be applied. I asked him whether or not it makes sense to buy refurbished and then have to pay for support fee. He said this is the way how it works.Return this unit.

i was stuck with beyond shitty att and dsl service. they forced me into sub par gear(old wireless b device for over 120$) and even worse service(download caps, etc...) so i branched out and found other providers that have no download caps(dsl extreme, so far so good for a 1/4 the price at 2 the speed) and then i found this awesome router with open source software (dd-wrt) for doing your own statistics and diagnostics of what's going on w your router/modem. i love it and screw you att

I've been working with this AP for 6 months now and have had a number of issues. For one, the firmware that comes with it, which is the most up to date (2.0.16) does not support apple products. Anything from the Mac Books to the Iphones does not connect. So if you want to support all devices you have to downgrade to 2.0.12. Which would be fine if it wasn't for the fact that 2.0.16 solves a number of issues that make it impossible for people to get out onto the net after ~3 hours of usage. I've tried contacting Netgear about their plans to fix this with no success yet. If you're looking for a cheap wireless solution for your small business I would not recommend this AP.Edit: Just got word back from Netgear that they do not have plans to implement new firmware to solve the freezing issues and support apple products.

After working with NetGear Tech Support, Wireless Router worked. But, it has only been two days. Amazon sold this itemthat the Manufacter won't warranty or provide Tech Support unless I showed them that I had purchased it new. Router had been build more than 18 months ago. This by itself is not a problem, but there was no mark down in price or mention of this fact when the item was bought from Amazon.com. Will look other places first when buying in the future!

I used this Netgear WNR3500L with Tomato open-source software to do what a device twice the cost couldn't do. With this I can segment the network with vlans (802.11q tagged or port vlan) on the switchports, and decide which vlan I want my wireless to run on. It supports multiple IP interfaces, one for each vlan you create. Great for guest networks! It has many other features that I didn't even tap into. Glad I bought it, I'm going to buy another!

I have a desktop that is not wireless and a laptop that is. With this adapter and a wireless gateway, I now have two computers that are wireless. It does what it is supposed to! The only drawback is the cradle that is supposed to hold the actual adapter. The plastic is flimsy and too short causing the adapter to tip it over or fall out of it; in addition, the velcro tape that is supposed to hold the cradle in place with the adapter in it is too small and cannot do the job. The adapter is too top heavy and pulls the plastic cradle down no matter where it is located (I even added extra Scotch tape). The cord of the adapter, which is now plugged into the front USB port of my desktop CPR, now dangles rakishly over the top and down the side of it. Next time, I'll get one without a cord. But it works great!!

Got this from local outlet of a major office supply store. Price was slightly more at the store than Amazon. Needed a solution that would work with my Acer Aspire One netbook and my cable modem router. Netbook OS is Windows XP SP3. My in home wireless network runs WPA2 encryption protection, the Athereos 5007EG wireless card in the netbook would not connect. Tried multiple attempts to make adjustments to settings and get updated drivers. Nothing worked. Thought I would try this route. Glad I did. Adapter comes with a mini CD with software, had to copy that to a memory stick to trasfer to netbook (no cd drive in netbook). Loaded without difficulty and set up like a breeze. Up and running in less than 10 minutes. Very pleased with this device for in home use. Have not tried it yet in public places but expect it will work without problems. Glad to have it.

This router was very simple to setup. No CD or anything was needed. That was pretty much the only positive thing I can say about it after using it for a couple of months. I run my laptop, cell phone, and PS3 off of this thing. The PS3 is actually hard-wired through the router. Everything else is wireless. The wireless speed seems slower than my previous linksys G on my cell phone of all things. It ran much faster on my old Linksys that died on me. But the main issue is the way the router randomly loses connection. Good job Netgear for including a very convenient button on the back to turn off and turn back on the wireless transmitter. You will be doing that frequently to get the signal to re-activate on your devices. The router just drops out for no reason at random times throughout the day. Overall, it gets the job done...but If you're like me and leave home with large files uploading or downloading expecting them to be done by the time you're home, you'd better look elsewhere, for the router will have undoubtedly lost connection while you are out and about and your file will be frozen in limbo waiting for that reset. I will be going back to Linksys routers very soon.