Отзывы о Материнская плата ASUS ROG MAXIMUS Z790 HERO
547 отзывов пользователей o ASUS ROG MAXIMUS Z790 HERO
Пользовались
ASUS ROG MAXIMUS Z790 HERO?
Поделитесь своим опытом и помогите другим сделать правильный выбор
The board is way too expensive but the build quality does match the price. I had a few issues when fitting it to my case - mainly the orientation of the USB3 port on the board has changed and caused me some grief during installation but other than that it was fine.
If you are considering saving a few quid by going with the cheaper Gigabyte Aorus Z490 Master board (like I did initially) then don't. Poor build quality and faulty/bent pins meant that I was returning it within 48 hours of receipt and going back with my tail between my legs to purchase this board. The only reason this board doesn't get 5 stars from me is the price - should be £100 cheaper.
The main issue is system instability. Even while under a light load, the PC can randomly turn off and then restart after a few seconds. I have updated to the latest BIOS version, I have swapped out every piece of hardware in the PC and no improvement. The only thing which has made any difference is disabling processor c-states and ASUS MCE in the BIOS, but even then the issue hasn't completely gone away.
Another issue is that XMP I or II simply don't work. Attempting to use them causes the PC to freeze a few seconds after booting and then turn off. This is a known issue as can be seen from a quick google search.
End result is I have two £1,500 PCs which turn themselves off a few times per day without warning.
Not worth risking a new build on, and waste of time really such a shame.
Looks great, with RGB above the I/O shield controlled through either Asus' Aura Sync or Armoury Crate.
I would recommend doing a BIOS update before anything else though.
- the top M2 slot is placed in such a way that the GPU heats it up. I've put my SSD in the bottom one which solved the problem completely, but be mindful of it if you have two
- it didn't POST half of the time and couldn't complete windows setup with two RAM sticks installed until I've manually enabled XMP2 in BIOS. The behaviour looks like a hardware failure, but if you leave just one stick to boot into BIOS, enable XMP2, and only then add the second stick, it will all be fine.
Other than that it's nice, cool, has a reasonable BIOS and has enough headers (it's very convenient two have two independent chassis headers).
Otherwise nice design
Plenty of USB ports and room for two m.2 nvme drives which is a bonus. WiFi-AX built in is rock solid and suffered no drops whilst gaming.
Also much happier with the onboard IO LEDs this gen as they stand out much more.
As always the UEFI is personally the best on the market.
Would highly recommend.
I run all the latest games maxed out no issues.
The bios is ok, its a tad more complicated than some other boards but it does the job.
I would highly recommend
The board looks great even if getting the aura sync software to work is a bit of a hassle and if you have a lot of fans in your case it can bit a little tight fitting and fiddly getting some of the cables in due to the amount and size of the heatsinks. Minor problems but annoying nonetheless.
I would highly recommend this board to anyone who is interested.
I went for the bluetooth version which works very well with my headphones, no additional work needed there.
It's a very good looking board, with good quality connections and great RGB.












