Материнская плата ASUS ROG MAXIMUS Z790 HERO — 548 отзывов, плюсы и минусы
548 отзывов пользователей о ASUS ROG MAXIMUS Z790 HERO
Пользовались
ASUS ROG MAXIMUS Z790 HERO?
Поделитесь своим опытом и помогите другим сделать правильный выбор
1. The ASUS has better VRM cooling compared to both the MSI and Gigabyte. The MSI has a fan just as the ASUS but it is a high velocity fan which generates a lot of noise but does a poor job of cooling the VRM's compared to the ASUS VRM fan which does a good job of cooling and is silent, Gigabyte lacks a fan completely (MSI allows full control over the fan in the BIOS and ASUS does not).
2. All the fan headers on the ASUS board are PWM headers, the MSI's chassis header is DC 3 pin.
3. RGB/LED headers are on opposite sides of the board on the ASUS and there are two in total, the MSI has one and it is a 3 pin.
4. The ASUS has an illuminated ROG symbol on the NVMe heatsink which is a nice touch and not overpowering, the light is subtle and easy to control, the MSI has nothing of the sort.
5. The ASUS has both NVMe slots on the top side of the board and both are teamed up with individual heatsinks unlike MSI who have one NVMe port on the top side and one of the bottom side of the board which is a pain if something goes wrong and there is no heatsink for that bottom one due to space constraints.
6. ASUS has far superior fan controls within the BIOS and the software within the OS is very good, gives much better control compared to MSI Dragon Centre software.
7. ASUS can control the LED's on my Hyper-X Fury RAM and enable 'Smart' lighting which is set to change colour in a certain temperature range (0 degrees to 50 green light, 50 to 70 degrees yellow light and 70 to 100 red light). but the MSI cannot control the RAM LED's at all, even though it is compatible and stated in the list on MSI's website.
This is what totally killed the MSI for me. Both boards had an i7 10700 CPU fitted with the same Noctua NH-L9i chromax.black heatsink, Corsair SF750 PSU, 32GB Hyper-X Fury DDR4 RAM and Gigabyte 1660 Super OC GPU. I was testing the MSI with a 15 minute 4K movie rendering and the CPU temperature was through the roof, it hit 99 Degrees Celsius and I discovered that the MSI Dragon Centre software was causing that, as soon as I killed the software, the temperature dropped 14 degrees which is still unacceptable, running at 85 degrees while rendering a 4K movie of 15 minutes run time. All the same components, in the same case, with the same chassis fan on the ASUS board never climbed above 70 Degrees Celsius, which is a massive difference. The ambient temperature was 26 degrees for both tests and I was sold on the ASUS.
The one negative of the ASUS board is that it currently cannot overclock the RAM in dual channel mode without crashing, none of the XMP profiles work and no amount of manual tuning fixes the problem. This is a known issue and being spoken about on the ASUS forum, several BIOS revisions were released in the forum for users to test but none of the users had the issue resolved. So if you can wait or are not overly concerned about RAM overclocking, then this board is by far the best Mini-ITX choice.
Update 15th September: The batch of faulty boards can be identified with the revision code A13, which is located on the Serial Number sticker near the CPU socket. On the forums it has now been confirmed that a new revision board is being sent as replacement under RMA which has the revision number A14 and the dual XMP crashes are fixed.
Update 17th September: Received a replacement board from Amazon, same revision (A13), same fault. So Amazon need to send these boards back to ASUS and get the updated ones which are A14. Identifiable from the outside of the box as "MB14A0".
I installed windows then updated the bios. I hit some problem by doing this then got a cannot repair message and windows was unable to load. I thought it was beyond repair but I managed to get past this somehow but can't remember the details. So if it is running OK I suggest not updating the bios if you have no problems already and are unsure of any hurdles you may hit.
If you have an aio cooler you may get an error for having no cpu fan and you will be stuck on the bios screen. You should go into bios and select DISABLE CPU FAN if you choose not to use the cpu fan header. But make sure your fans are blowing and controllable. I'm just waiting for a fan splitter then I will connect to the cpu header.
Edit
Note that the large USB lead from your case is plugged in to the bottom on this motherboard. This will leave the cable on top of the psu shroud. It is more tidy to have this USB socket on the right of the board. I will be having a vertical gpu to hide this.
This has been my worst PC purchase to Date.
Update: although I am outside the returns window, Amazon have agreed to sending me a replacement first and refund second if the replacement is plagued with the same issues. I have separately purchased a set of RAM as I've read that purchasing RAM separately isn't suggested as it's not guaranteed to be compatible with the memory optimization as the RAM will have different components even if it's the same style, which results in the scenario described above.
the thing i really like about this is that there are two M2 slots, one under a heat sync and one near the middle of the board. having the option to have 2 along with 6 SATA ports is really handy for lots of storage.
one of the reasons i always stick with asus is that i love the software, including the bios software, its really easy to navigate and tweak every aspect if you want to. there is an EZ mode if you are not confident in the bios then an advanced move for changing every voltage and timing ever!
overall this is a great looking board with a lot of functionality for the price. I always like to get the best for price and i feel like ive done this with this board.
The motherboard came with all the necessary pieces and some nice extras which included a wrist strap (ROG) a fan and mount to provide extra cooling which was all nice. Instructions were easy to read and my computer booted straight away. Would highly recommend this board if you plan on using a higher end CPU to overclock as there is a good amount of cooling and support for cooling.
After many hours Gaming with overclocked settings (Intel CPU i7 9000K from 3.6 MHz to 5.2 MHz), the system remains stable all the time. It is almost two months since I purchased this product and I haven't noticed any stability issues even with high overclock settings.
I would recommend it to anyone, but if you do not require the WiFi feature, there are cheaper models that support overclocking too.
Only real issue I had was that the pre loading of "Asus Armoury" is outdated, even after a BIOS update.
Recommend getting all the drivers from the ASUS site.
Some ports aren't descripted properly on the manual, for first timers, the manual is rather useless to figure out what ports are where.
However, these are all my personal opinions on the paperwork.
The actual product is great, quiet, subtle RGB features, feature packed.
Easily handes 8 RGB fans and plenty of handy IO.
Weak wifi unless you equip the extender (dongle), the dongle could have done with some kind of side mount or an adhesive or velco to stick to the side of a case or such, the wired, stand design isn't very helpful.
I wanted my next motherboard to have a pre-mounted IO shield which at the current time your paying a premium for.
My old motherboard was Asus one and so went with the same manufacturer in hopes doing so I wouldn't have issues with windows and have to re-install it (which never happened, only issue it failed to boot the first time and on the second boot did some eternal checks and runs perfectly)
The most important reason of all was for the RGB, I use Razer synapse with a ASUS aura connect module to control all my RGB so everything is in sync (nothing is as satisfying when all your RGB is in sync)
With my new motherboard and cpu I've been able to over clock it to 5Ghz and is stable, reaching temps of around 70 degrees.
I have had no issues so far and I'm glad I spent the extra money on the motherboard.
I have 8 SATA drives and this board can only accommodate 6 so bear that in mind, the saving grace are the M.2 connections, which means you will have to buy M.2 SSDs' to take advantage of the ports.
The Aura is easy to configure with the installed software on disc.
This board can easily overclock your processor (provided you have an overclockable CPU) and appropriate cooler and RAM.
Quality board with a lot to offer.
My problem is, the first one I ordered had two problems with it. Firstly, 1 pin in the CPU socket was completely missing. Not bent, completely gone! Now, I don't know if this was a manufacturing problem that was overlooked or if it somehow came out during shipment but nonetheless, one was missing. And this caused a very annoying issue for me in that Windows 10 installation would freeze and I'd have to restart my whole computer to get it to reset. I knew for a fact it wasn't my hardware so I just got unlucky.
Secondly, and this one is more obscure, but everytime I plugged in a USB peripheral - whether that be a mouse, keyboard, USB stick etc....... it also caused this freezing issue even on an SSD that already had Windows 7 installed on it.
So, not only did it have a CPU socket pin missing, but even if it was there, the USB ports were somehow busted and causing freezing which is an issue in this day and age when PS/2 keyboards have gone out of fashion.
The reason this is not 1 star is due to the fact that I have ordered a second one. All CPU sockets seem to be there, waiting on a new CPU cooler to arrive. If this one works all well and good, then I would recommend this motherboard with just a bit of caution you might get a faulty one. If my second one also has problems, then I will update this with 1-star. I'll let you all know
EDIT: Second one indeed worked, bumped up to 4 stars but be warned. You may get a broken one. But if you do, Amazon will refund you and this motherboard is worth the hassle
Installed a M2 SSD and got it all booted into the Bios and upgraded to latest version very very easy, also nice and easy to run your ram at the right Mhz (3200 in my instance)
The logo lights up aswell.
Would recommend and would buy ASUS again next time
The board is way too expensive but the build quality does match the price. I had a few issues when fitting it to my case - mainly the orientation of the USB3 port on the board has changed and caused me some grief during installation but other than that it was fine.
If you are considering saving a few quid by going with the cheaper Gigabyte Aorus Z490 Master board (like I did initially) then don't. Poor build quality and faulty/bent pins meant that I was returning it within 48 hours of receipt and going back with my tail between my legs to purchase this board. The only reason this board doesn't get 5 stars from me is the price - should be £100 cheaper.
The main issue is system instability. Even while under a light load, the PC can randomly turn off and then restart after a few seconds. I have updated to the latest BIOS version, I have swapped out every piece of hardware in the PC and no improvement. The only thing which has made any difference is disabling processor c-states and ASUS MCE in the BIOS, but even then the issue hasn't completely gone away.
Another issue is that XMP I or II simply don't work. Attempting to use them causes the PC to freeze a few seconds after booting and then turn off. This is a known issue as can be seen from a quick google search.
End result is I have two £1,500 PCs which turn themselves off a few times per day without warning.
Not worth risking a new build on, and waste of time really such a shame.
Looks great, with RGB above the I/O shield controlled through either Asus' Aura Sync or Armoury Crate.
I would recommend doing a BIOS update before anything else though.
- the top M2 slot is placed in such a way that the GPU heats it up. I've put my SSD in the bottom one which solved the problem completely, but be mindful of it if you have two
- it didn't POST half of the time and couldn't complete windows setup with two RAM sticks installed until I've manually enabled XMP2 in BIOS. The behaviour looks like a hardware failure, but if you leave just one stick to boot into BIOS, enable XMP2, and only then add the second stick, it will all be fine.
Other than that it's nice, cool, has a reasonable BIOS and has enough headers (it's very convenient two have two independent chassis headers).
Otherwise nice design
Plenty of USB ports and room for two m.2 nvme drives which is a bonus. WiFi-AX built in is rock solid and suffered no drops whilst gaming.
Also much happier with the onboard IO LEDs this gen as they stand out much more.
As always the UEFI is personally the best on the market.
Would highly recommend.
I run all the latest games maxed out no issues.
The bios is ok, its a tad more complicated than some other boards but it does the job.
I would highly recommend
The board looks great even if getting the aura sync software to work is a bit of a hassle and if you have a lot of fans in your case it can bit a little tight fitting and fiddly getting some of the cables in due to the amount and size of the heatsinks. Minor problems but annoying nonetheless.
I would highly recommend this board to anyone who is interested.
I went for the bluetooth version which works very well with my headphones, no additional work needed there.
It's a very good looking board, with good quality connections and great RGB.
So when prompted to download DONT. Hope this will help anyone else having this issue. So apart from that looks and works great.
YouTube proof (also I build computers for a living so I know what I’m doing - Video was taken after I took it out of PC and removed GPU
The UEFI Bios is very easy to understand and set up everything when you first switch on your PC.
Aesthetically I love the RGB lights it brings a cool look to my case at night.
I would recommend it to anyone!
Endstanden является следующая система:
Core i7 - 6700K Skylake, 4 (8 потоков) x 4,00 ГГц Standart
- G. Skill 16 ГБ, DDR4, 3200 МГц
- Asus Maximus VIII Hero Alpha, Socket 1151,РОГ
- Asus ROG STRIX-GTX1070-8G-GAMING
- Corsair Hydro H80iV2, водяного охлаждения AIO
- Samsung 950 Pro Series M. 2 2280 SSD, 256 ГБ, системный диск
- Samsung 840 Pro Series SSD жесткий диск 512 ГБ, игровая панель
- Seagate Desktop HDD 3тб, SATA 6Gb/s (данные могила)
- Samsung EcoGreen F4 2TB, SATA 3Gb/s (предохранитель), внешний
- Corsair CC-9011081-WW Carbide, серии 400C, боковых окон
- Corsair RMi Series RM650i, 650W, ATX 2.4, полностью модульная
- 2 x Thermaltake Riing 12 LED, RGB, 3er Set кожух вентилятора
- 1 x Thermaltake Riing 12 LED Case Fan черный/красный
- Sleeved кабель BitFenix 24-Pin 30cm Red / Black ATX
- Sleeved кабель BitFenix Alchemy PCI-E, 8-полюсный, красный / черный
- Sleeved кабель, Phanteks, 8-контактный EPS12V, красный / черный
- Sleeved кабель, Nanoxia передняя панель, 30см, красный одноместный рукав
Этот o. a. система заменил мой старый i7-4790K с частотой в 4,4 ГГц и превзошел мои но сначала очень скептически Ожидать в плане производительности и скорости без ограничений.
После первых тестов с заводским OC инструменты плат о. А. работала стабильно процессор (тест: 2 часа Prime95) на 4,7 ГГц.
при Этом было достигнуто такое "нагрузки" температура 68 градусов. Под нормальным "нагрузки" (не Прайм) процессор не будет теплее как 56 градусов. В Idle всего 29 градусов.
О возможности подключения материнской платы я не должен зацикливайтесь на этом, за исключением отличии от "обычных" Maximus VIII Hero:
- 2 x RGB для Одной LED Stripes, регулируемая RGB подсветка РОГ логотипы
Я бы решил для меня эта материнская плата, даже если это немного дороже.
быстро поставка согласно уведомления.
материнская плата бегает безупречно. Монтаж был несложным.
Так все должно происходить
2. сейчас я приду к моей проблеме я купил main борту у Warehouse Deals и Oackung было трещин уже и CD с драйверами отсутствовал. Главное на борту работает, но процессор не 800Mhz говорит о тактах и intel домене xtu что в idle при 20 градусах thermal throttling уже случилось, cpu core ratio можно так же в биосе не изменить.
Это мой последний вариант почему я действительно в конечном итоге с ПК все пробовал. (Процессор i7-6700K)
Прошу помощи
Другие порты работают также (среди прочего м. 2), я не мог проверить, но все.











