Отзывы о Материнская плата ASUS ROG MAXIMUS Z790 HERO
547 отзывов пользователей o ASUS ROG MAXIMUS Z790 HERO
Пользовались
ASUS ROG MAXIMUS Z790 HERO?
Поделитесь своим опытом и помогите другим сделать правильный выбор
Amazon Customer
20.12.2020
10/10
Оценка пользователя
Великолепно
Very happy with this
I love this board. Super fast delivery Thank you
Adam Deacon
20.12.2020
8/10
Оценка пользователя
Хорошо
easy install. great item. bad wifi range
the utem us great, super fast and easy to install, however the built in wifi range isnt great
kevin 123
20.12.2020
10/10
Оценка пользователя
Великолепно
No mounting screws
Good but did not come with the mounting screws ?
aaron
20.12.2020
10/10
Оценка пользователя
Великолепно
Eazey setup
Well made rgb look good eazey setup to
Paige W
20.12.2020
10/10
Оценка пользователя
Великолепно
For the gamer
High end product for the true gamer. Premium quality build and possibilities.
brtcobra
20.12.2020
4/10
Оценка пользователя
Ужасно
FAILS TO FIND ANY DRIVES
This mother board is nothing but a pain in the back side.
i installed an m.2 drive a samsung 850 evo and a seagate HDD all work fine on my other pc but in this board i have to mess around in the bios and enable csm or what ever it's called just to get it to see the drives. and don't even get my started on Asus intrusion mode. Fatal error constantly when enabled.
i installed an m.2 drive a samsung 850 evo and a seagate HDD all work fine on my other pc but in this board i have to mess around in the bios and enable csm or what ever it's called just to get it to see the drives. and don't even get my started on Asus intrusion mode. Fatal error constantly when enabled.
Chris Brown
20.12.2020
10/10
Оценка пользователя
Великолепно
Great board but Asus Aura isn't great
The mother board is spot on. It looks amazing, RGB is lovely and great connections. But the Asus aura software isn't great. I can get the motherboard doing the lighting that I like but the controls for external lighting such as water blocks and led strips don't always do what i'm telling them to and changing the settings automatically changes things in my BIOS such as lighting up when powered off etc.
But they are minor points. The board its self is great, the bios is detailed and it looks gorgeous. Just the software that lets it down
But they are minor points. The board its self is great, the bios is detailed and it looks gorgeous. Just the software that lets it down
Paul Archibald
20.12.2020
10/10
Оценка пользователя
Великолепно
Everything I was looking for.
This is a high quality, easy to install and full of features motherboard. One word of warning is to make sure the board has the minimum required BIOS for your CPU already installed or the board will not post. ASUS will say that it should still post to BIOS but I can tell you from first hand experience that it won't until it is updated. Apart from that the board is superb. Using the built in AI overclocking software it achieves settings just as good as I could get manually which makes overclocking so much quicker. I achieved 49 ratio on 6 cores and 50 ratio on 3 cores with an i5-9600k Refresh (R0 stepping). I also managed to overclock my Corsair Vengeance DDR4 memory from stock 2133MHz C13 to 3200MHz C16 at 1.35v. The only negative I found for this board is the CPU usage for Aura lighting. I must point out though that this issue is not exclusive to this board, it is the same on all ASUS ROG Strix boards. I feel it is more an issue with how the software interacts with the board rather than the board itself. Ways to fix this is to 1) Turn off the effects 2) or run the effects in either Dark(same as turning them off), Static, or smart. If like myself your case has an inbuilt RGB controller then I recommend using this as it uses zero CPU resources. I recommend this board very highly and anyone thinking of buying one won't be disappointed.
Christo Mastoroudes
20.12.2020
8/10
Оценка пользователя
Хорошо
Good but with some issues.
This review is for the ASUS ROG Strix Z490-F Gaming.
I had no issues installing and using the board. It has a good amount of ports and even has a m.2 wifi slot in addition to the two m.2 slots for ssd's.
The board certainly looks the part but I was slightly disappointed to see the shroud over the chipset, next to the ssd m.2 slot is plastic. There is a heatsink on the chipset itself, but what you see above is just a piece of plastic, impossible to discern with the eye just looking at it. Regardless the chipset is cooled properly and certainly the VRM stays nice and cool with an overclocked i7-10700k.
I really can't fault the physical layout of the board apart from the small niggle mentioned above. However the bios is buggy. The bios that shipped with the board was the initial version 04** and it had several issues. For example it was impossible to get both my monitors working, running one of a dedicated GPU and one of the CPU. Once I updated to the new version 06** that got fixed.
I also have an issue with the adaptive voltage setting for the CPU, it does not seem to work properly and I am hoping it is just another bios issue. I can not get anything near stable. Inputting a voltage of 1.3v was all of a sudden 1.6v in Windows with temps hitting the 90's just loading Windows. I have always run adaptive voltage on every cpu since the i7 4790 days without issue, but now I am unable to get stable with voltage all over the place.
For now I am running a constant vcore and it work really well. Got 5.1ghz with avx offset of 1 at 1.395v.
The bios needs some work, but I can almost forgive them because it is just after release. I will have to play around some more with the adaptive voltage.
In general a good looking and fast performing motherboard with some bios bugs.
I had no issues installing and using the board. It has a good amount of ports and even has a m.2 wifi slot in addition to the two m.2 slots for ssd's.
The board certainly looks the part but I was slightly disappointed to see the shroud over the chipset, next to the ssd m.2 slot is plastic. There is a heatsink on the chipset itself, but what you see above is just a piece of plastic, impossible to discern with the eye just looking at it. Regardless the chipset is cooled properly and certainly the VRM stays nice and cool with an overclocked i7-10700k.
I really can't fault the physical layout of the board apart from the small niggle mentioned above. However the bios is buggy. The bios that shipped with the board was the initial version 04** and it had several issues. For example it was impossible to get both my monitors working, running one of a dedicated GPU and one of the CPU. Once I updated to the new version 06** that got fixed.
I also have an issue with the adaptive voltage setting for the CPU, it does not seem to work properly and I am hoping it is just another bios issue. I can not get anything near stable. Inputting a voltage of 1.3v was all of a sudden 1.6v in Windows with temps hitting the 90's just loading Windows. I have always run adaptive voltage on every cpu since the i7 4790 days without issue, but now I am unable to get stable with voltage all over the place.
For now I am running a constant vcore and it work really well. Got 5.1ghz with avx offset of 1 at 1.395v.
The bios needs some work, but I can almost forgive them because it is just after release. I will have to play around some more with the adaptive voltage.
In general a good looking and fast performing motherboard with some bios bugs.
Lucian Ciobanu
20.12.2020
4/10
Оценка пользователя
Ужасно
Overclock is unstable
This was one of the most expensive ITX motherboards the money can buy and yet...
First, the box and motherboard were not sealed in any way, a bit of disappointment there because I wanted to be absolutely sure that the motherboard is actually new. However, the motherboard looks new and all the accessories came in sealed bags.
Then, it puts the memory at 2133 MHz by default (no overclocking). I have 2 x Corsair 3200 MHz and Intel i9 10900K so I'm expecting at least 2933 MHz from this motherboard, specially when it says up to 4800 MHz in the specs and I paid so much for it. Well, it turns out that turning on the overclocking causes a random crash now and then, regardless of heavy load or not. I tried 3200 MHz and 2933 MHz, the same issue. It turns out this is a known issue with this motherboard. I'm assuming no gamer would buy a motherboard with just 2133 MHZ memory frequency, so I don't recommend buying this motherboard. It's a waste of money.
I used the latest BIOS version, upgraded myself. I don't know if an updated BIOS in the future would solve this issue, I'm very pessimistic, but for now I'm staying with 2133 MHz for stability.
First, the box and motherboard were not sealed in any way, a bit of disappointment there because I wanted to be absolutely sure that the motherboard is actually new. However, the motherboard looks new and all the accessories came in sealed bags.
Then, it puts the memory at 2133 MHz by default (no overclocking). I have 2 x Corsair 3200 MHz and Intel i9 10900K so I'm expecting at least 2933 MHz from this motherboard, specially when it says up to 4800 MHz in the specs and I paid so much for it. Well, it turns out that turning on the overclocking causes a random crash now and then, regardless of heavy load or not. I tried 3200 MHz and 2933 MHz, the same issue. It turns out this is a known issue with this motherboard. I'm assuming no gamer would buy a motherboard with just 2133 MHZ memory frequency, so I don't recommend buying this motherboard. It's a waste of money.
I used the latest BIOS version, upgraded myself. I don't know if an updated BIOS in the future would solve this issue, I'm very pessimistic, but for now I'm staying with 2133 MHz for stability.
Riccardo
20.12.2020
10/10
Оценка пользователя
Великолепно
Great price
Really happy with this board so far. only had it running a few days though.
Building was fast and easy. only a slight issue with the size of the rear io fitting in my phantek p400 case. i had to leave some motherboard screws out. Also the board is thin so i had to shim the cpu cooler mount on my corsair H100 v2. I did this with some washers.
Im running an i5 9600k in mine and with the cooler its sitting at 30 degrees (fans on silent). on boost its about 50 so plenty of room for overclocking. I'll report back once ive done that. The CPU mount is tight so it was a little scary pulling that lever down. Its been a while since i last did one. But it located perfectly.
the AI suite software has advanced a lot since my old p8p67 pro. Also the Bios is really easy to use. I had windows up and running in less that 15 minutes using UEFI boot.
Fan control is awesome. also the RBG lighting looks pretty pimp.
The motherboard doesn't come in a static bag. I thought this was strange but apparently its normal for ROG boards. That said the board worked great so obviously isn't an issue
i've included some pictures. I haven't tidied the fan wires yet because they are too short so don't judge me lol
UPDATE: The CPU temp is stuck on 11 degrees. This is in both bios and AI suite. This makes tuning the fans difficult. I seem to remember Asus temps are always a bit wild but this is clearly a fault. I'm going to run a 2pin thermal sensor instead and hope its just a software issue.
now running 4.8ghz with 1.35 volts. realtemp is showing 70 degrees max temp.
Building was fast and easy. only a slight issue with the size of the rear io fitting in my phantek p400 case. i had to leave some motherboard screws out. Also the board is thin so i had to shim the cpu cooler mount on my corsair H100 v2. I did this with some washers.
Im running an i5 9600k in mine and with the cooler its sitting at 30 degrees (fans on silent). on boost its about 50 so plenty of room for overclocking. I'll report back once ive done that. The CPU mount is tight so it was a little scary pulling that lever down. Its been a while since i last did one. But it located perfectly.
the AI suite software has advanced a lot since my old p8p67 pro. Also the Bios is really easy to use. I had windows up and running in less that 15 minutes using UEFI boot.
Fan control is awesome. also the RBG lighting looks pretty pimp.
The motherboard doesn't come in a static bag. I thought this was strange but apparently its normal for ROG boards. That said the board worked great so obviously isn't an issue
i've included some pictures. I haven't tidied the fan wires yet because they are too short so don't judge me lol
UPDATE: The CPU temp is stuck on 11 degrees. This is in both bios and AI suite. This makes tuning the fans difficult. I seem to remember Asus temps are always a bit wild but this is clearly a fault. I'm going to run a 2pin thermal sensor instead and hope its just a software issue.
now running 4.8ghz with 1.35 volts. realtemp is showing 70 degrees max temp.
Masquerade
20.12.2020
2/10
Оценка пользователя
Ужасно
Great Mini-ITX Board
I purchased an MSI Z490 Mini-ITX board and this ASUS Z490 Mini-ITX board and I have to say the ASUS board is far superior to the MSI and Gigabyte boards because of the following points.
1. The ASUS has better VRM cooling compared to both the MSI and Gigabyte. The MSI has a fan just as the ASUS but it is a high velocity fan which generates a lot of noise but does a poor job of cooling the VRM's compared to the ASUS VRM fan which does a good job of cooling and is silent, Gigabyte lacks a fan completely (MSI allows full control over the fan in the BIOS and ASUS does not).
2. All the fan headers on the ASUS board are PWM headers, the MSI's chassis header is DC 3 pin.
3. RGB/LED headers are on opposite sides of the board on the ASUS and there are two in total, the MSI has one and it is a 3 pin.
4. The ASUS has an illuminated ROG symbol on the NVMe heatsink which is a nice touch and not overpowering, the light is subtle and easy to control, the MSI has nothing of the sort.
5. The ASUS has both NVMe slots on the top side of the board and both are teamed up with individual heatsinks unlike MSI who have one NVMe port on the top side and one of the bottom side of the board which is a pain if something goes wrong and there is no heatsink for that bottom one due to space constraints.
6. ASUS has far superior fan controls within the BIOS and the software within the OS is very good, gives much better control compared to MSI Dragon Centre software.
7. ASUS can control the LED's on my Hyper-X Fury RAM and enable 'Smart' lighting which is set to change colour in a certain temperature range (0 degrees to 50 green light, 50 to 70 degrees yellow light and 70 to 100 red light). but the MSI cannot control the RAM LED's at all, even though it is compatible and stated in the list on MSI's website.
This is what totally killed the MSI for me. Both boards had an i7 10700 CPU fitted with the same Noctua NH-L9i chromax.black heatsink, Corsair SF750 PSU, 32GB Hyper-X Fury DDR4 RAM and Gigabyte 1660 Super OC GPU. I was testing the MSI with a 15 minute 4K movie rendering and the CPU temperature was through the roof, it hit 99 Degrees Celsius and I discovered that the MSI Dragon Centre software was causing that, as soon as I killed the software, the temperature dropped 14 degrees which is still unacceptable, running at 85 degrees while rendering a 4K movie of 15 minutes run time. All the same components, in the same case, with the same chassis fan on the ASUS board never climbed above 70 Degrees Celsius, which is a massive difference. The ambient temperature was 26 degrees for both tests and I was sold on the ASUS.
The one negative of the ASUS board is that it currently cannot overclock the RAM in dual channel mode without crashing, none of the XMP profiles work and no amount of manual tuning fixes the problem. This is a known issue and being spoken about on the ASUS forum, several BIOS revisions were released in the forum for users to test but none of the users had the issue resolved. So if you can wait or are not overly concerned about RAM overclocking, then this board is by far the best Mini-ITX choice.
Update 15th September: The batch of faulty boards can be identified with the revision code A13, which is located on the Serial Number sticker near the CPU socket. On the forums it has now been confirmed that a new revision board is being sent as replacement under RMA which has the revision number A14 and the dual XMP crashes are fixed.
Update 17th September: Received a replacement board from Amazon, same revision (A13), same fault. So Amazon need to send these boards back to ASUS and get the updated ones which are A14. Identifiable from the outside of the box as "MB14A0".
1. The ASUS has better VRM cooling compared to both the MSI and Gigabyte. The MSI has a fan just as the ASUS but it is a high velocity fan which generates a lot of noise but does a poor job of cooling the VRM's compared to the ASUS VRM fan which does a good job of cooling and is silent, Gigabyte lacks a fan completely (MSI allows full control over the fan in the BIOS and ASUS does not).
2. All the fan headers on the ASUS board are PWM headers, the MSI's chassis header is DC 3 pin.
3. RGB/LED headers are on opposite sides of the board on the ASUS and there are two in total, the MSI has one and it is a 3 pin.
4. The ASUS has an illuminated ROG symbol on the NVMe heatsink which is a nice touch and not overpowering, the light is subtle and easy to control, the MSI has nothing of the sort.
5. The ASUS has both NVMe slots on the top side of the board and both are teamed up with individual heatsinks unlike MSI who have one NVMe port on the top side and one of the bottom side of the board which is a pain if something goes wrong and there is no heatsink for that bottom one due to space constraints.
6. ASUS has far superior fan controls within the BIOS and the software within the OS is very good, gives much better control compared to MSI Dragon Centre software.
7. ASUS can control the LED's on my Hyper-X Fury RAM and enable 'Smart' lighting which is set to change colour in a certain temperature range (0 degrees to 50 green light, 50 to 70 degrees yellow light and 70 to 100 red light). but the MSI cannot control the RAM LED's at all, even though it is compatible and stated in the list on MSI's website.
This is what totally killed the MSI for me. Both boards had an i7 10700 CPU fitted with the same Noctua NH-L9i chromax.black heatsink, Corsair SF750 PSU, 32GB Hyper-X Fury DDR4 RAM and Gigabyte 1660 Super OC GPU. I was testing the MSI with a 15 minute 4K movie rendering and the CPU temperature was through the roof, it hit 99 Degrees Celsius and I discovered that the MSI Dragon Centre software was causing that, as soon as I killed the software, the temperature dropped 14 degrees which is still unacceptable, running at 85 degrees while rendering a 4K movie of 15 minutes run time. All the same components, in the same case, with the same chassis fan on the ASUS board never climbed above 70 Degrees Celsius, which is a massive difference. The ambient temperature was 26 degrees for both tests and I was sold on the ASUS.
The one negative of the ASUS board is that it currently cannot overclock the RAM in dual channel mode without crashing, none of the XMP profiles work and no amount of manual tuning fixes the problem. This is a known issue and being spoken about on the ASUS forum, several BIOS revisions were released in the forum for users to test but none of the users had the issue resolved. So if you can wait or are not overly concerned about RAM overclocking, then this board is by far the best Mini-ITX choice.
Update 15th September: The batch of faulty boards can be identified with the revision code A13, which is located on the Serial Number sticker near the CPU socket. On the forums it has now been confirmed that a new revision board is being sent as replacement under RMA which has the revision number A14 and the dual XMP crashes are fixed.
Update 17th September: Received a replacement board from Amazon, same revision (A13), same fault. So Amazon need to send these boards back to ASUS and get the updated ones which are A14. Identifiable from the outside of the box as "MB14A0".
R. Coughlin
20.12.2020
10/10
Оценка пользователя
Великолепно
Looks good.
I was going to go for the maximum xi but went for this to save some dosh. Also I thought it would look nicer with a vertical gpu which would have hidden the ROG eye on the maximus. Housing an i5 9600k out the box without needing to update bios which I was worried about.
I installed windows then updated the bios. I hit some problem by doing this then got a cannot repair message and windows was unable to load. I thought it was beyond repair but I managed to get past this somehow but can't remember the details. So if it is running OK I suggest not updating the bios if you have no problems already and are unsure of any hurdles you may hit.
If you have an aio cooler you may get an error for having no cpu fan and you will be stuck on the bios screen. You should go into bios and select DISABLE CPU FAN if you choose not to use the cpu fan header. But make sure your fans are blowing and controllable. I'm just waiting for a fan splitter then I will connect to the cpu header.
Edit
Note that the large USB lead from your case is plugged in to the bottom on this motherboard. This will leave the cable on top of the psu shroud. It is more tidy to have this USB socket on the right of the board. I will be having a vertical gpu to hide this.
I installed windows then updated the bios. I hit some problem by doing this then got a cannot repair message and windows was unable to load. I thought it was beyond repair but I managed to get past this somehow but can't remember the details. So if it is running OK I suggest not updating the bios if you have no problems already and are unsure of any hurdles you may hit.
If you have an aio cooler you may get an error for having no cpu fan and you will be stuck on the bios screen. You should go into bios and select DISABLE CPU FAN if you choose not to use the cpu fan header. But make sure your fans are blowing and controllable. I'm just waiting for a fan splitter then I will connect to the cpu header.
Edit
Note that the large USB lead from your case is plugged in to the bottom on this motherboard. This will leave the cable on top of the psu shroud. It is more tidy to have this USB socket on the right of the board. I will be having a vertical gpu to hide this.
Jake Billing
20.12.2020
10/10
Оценка пользователя
Великолепно
Stealthy Appearance, Solid Motherboard!
The Asus Z390-F Motherboard is a great choice for PC builds! I've recently built a system for use with Adobe's Premiere Pro and to play some of the latest PC game titles, and what can I say? This board offers an array of features ranging from support for the latest Intel i9 Processors, to supporting 4000mhz+ DDR4 memory. Not to mention support for the latest and greatest Nvidia and AMD graphics cards including SLI. The board has plenty of Sata3 ports for storage, and two M.2 NVME PCI-E ports for flash storage. The board comes well packaged with a fully comprehensive installation guide, and I love the ROG STRIX RGB heatsink/backplate. The system I've built features the Intel i9 9900KS processor, NZXT H510 Elite case and NZXT Kraken x62 AIO Cooler, 32GB of DDR4 4000MHZ memory, an Nvidia RTX 2070, 2x Samsung 970 NVME drives, 2x Sata3 Samsung 960 SSD drives, and 2x 4TB Seagate Storage volumes, and finally Corsair's 750w Modular PSU. One great thing to mention about this motherboard, it has plenty of headers for Chassis Fans! I found all of the external headers to be logically placed on this board, enabling me to keep my system super clean. The board features some really easy to use Overclocking tools and I really like how you can update the board's firmware over the LAN. Overall great quality product for a great price. Would purchase again! - Jake
Robberg
20.12.2020
10/10
Оценка пользователя
Великолепно
Very good but do your research first
After wanting to change from a 9 Series Intel CPU to a 10 Series I needed a Z490 chipset motherboard. Having previously bought Gigabyte boards I felt like a change and Asus have a good reputation. After going through the minefield of so many different specifications I settled on the Z490-F as I don’t require Wi-Fi that the Z490-E has. It is a well-built board and I like the fact that it has 2 NVMe M2 slots. At the moment I only have one NVMe SSD and I recommend installing it in the second slot as the first is blocked by the graphics card, is very close to the CPU and runs around 5-6 degrees hotter than in the second slot. Both slots run at full speed and there are heatsinks for both. As this is classed as an enthusiast board, I think ASUS assume some level of expertise without having to tell you. Therefore, a tip is to enable CSM in the BIOS prior to installing your OS as without it, it doesn’t enable full UEFI and formats the hard drive as MBR instead of GPT. I think this should be set to default but there may be a reason for that. I found out the hard way and it’s not possible to change it once the OS is installed which means a reformat and starting from scratch. I didn’t want to do this so bought partition management software that enables you do it within Windows. The BIOS settings are very easy to go through but the motherboard manual does not detail the settings as did previous motherboards manuals that I’ve had. Even though the settings are described when you click on them, I prefer to go from a manual. I couldn’t find anything on the ASUS site for the Z490 chipset but did find a PDF for the Z390 which is very similar. Having said all that, I’ve been using the board for well over a month now with an i7-10700K overclocked to 5.2GHZ and I’m very pleased with it.
Colin M
20.12.2020
2/10
Оценка пользователя
Ужасно
Avoid if you can
Have had absolutely nothing but problems since purchasing this motherboard, it took an exceedingly long amount of time to get it to boot after first installing it where it would boot & restart 3 times indicating a RAM issue (of which there is none) , the issue has just resurfaced following a Bios update to 1401. Well outside my purchase window and unfortunately I'm unable to return this item.
This has been my worst PC purchase to Date.
Update: although I am outside the returns window, Amazon have agreed to sending me a replacement first and refund second if the replacement is plagued with the same issues. I have separately purchased a set of RAM as I've read that purchasing RAM separately isn't suggested as it's not guaranteed to be compatible with the memory optimization as the RAM will have different components even if it's the same style, which results in the scenario described above.
This has been my worst PC purchase to Date.
Update: although I am outside the returns window, Amazon have agreed to sending me a replacement first and refund second if the replacement is plagued with the same issues. I have separately purchased a set of RAM as I've read that purchasing RAM separately isn't suggested as it's not guaranteed to be compatible with the memory optimization as the RAM will have different components even if it's the same style, which results in the scenario described above.
Hawke84
20.12.2020
10/10
Оценка пользователя
Великолепно
Great
Really good Asus motherboard. I always tend to stick with Asus and they havent let me down. This is a fantastic mid range gaming motherboard. it has 2 fan headers plus 2 for the CPU, i would have liked to have seen a few more but ive had more expensive boards before. it also comes with 2 RGB headers and an addressable RGB header meaning you can use 12v rgb strips then have individual leds controlled such as on fans. again would love more and i know the board cant be covered in headers! on RGB, the back IO panel uses asus aura software and has cool RGB effects too.
the thing i really like about this is that there are two M2 slots, one under a heat sync and one near the middle of the board. having the option to have 2 along with 6 SATA ports is really handy for lots of storage.
one of the reasons i always stick with asus is that i love the software, including the bios software, its really easy to navigate and tweak every aspect if you want to. there is an EZ mode if you are not confident in the bios then an advanced move for changing every voltage and timing ever!
overall this is a great looking board with a lot of functionality for the price. I always like to get the best for price and i feel like ive done this with this board.
the thing i really like about this is that there are two M2 slots, one under a heat sync and one near the middle of the board. having the option to have 2 along with 6 SATA ports is really handy for lots of storage.
one of the reasons i always stick with asus is that i love the software, including the bios software, its really easy to navigate and tweak every aspect if you want to. there is an EZ mode if you are not confident in the bios then an advanced move for changing every voltage and timing ever!
overall this is a great looking board with a lot of functionality for the price. I always like to get the best for price and i feel like ive done this with this board.
ksbhupal
20.12.2020
4/10
Оценка пользователя
Ужасно
Great ASUS quality let down by Amazon sending out used/scratched article
Received this ROG Maximus XII HERO, awesome looking board. Very well built. First thing I noticed is that there was no tape or seal on the box. It was slightly open, ignored that and carried on unwrapping then discovered some scratches in the ROG RGB cover and marks on the 3rd M2 heat sink. Again ignored them and fired it up, bios a little more complex than I am used to but it recognised a new M2 500GB storage stick so installed Windows 10 without touching the install disk and it seemed to work great. Installed another M2 1TB stock which it recognised and worked for a week but then the 1TB disappears and would not work in any of the M2 slots and some of the SATA slots began to be reordered so packed up now and ready to be returned. I assume now it was a return that was sent back to Amazon only to be sold as new. Not sure if ASUS seal their boxes or leave the open - very disappointing with my first ASUS motherboard. Hopefully you will get a brand new untouched one and have better luck!
James Meredith
20.12.2020
10/10
Оценка пользователя
Великолепно
Excellent Motherboard and excellent for overclocking.
Motherboard arrived quickly and well packaged. The board was really nice and clean looking, I really love the look of the heat sinks on the VRM's and around the PCIE area. The board had a good selection of rear IO ports and also a good selection of connectors on the motherboard ranging from RGB connections, lots of fan headers and a selection of connectors for water coolers to monitor them correctly.
The motherboard came with all the necessary pieces and some nice extras which included a wrist strap (ROG) a fan and mount to provide extra cooling which was all nice. Instructions were easy to read and my computer booted straight away. Would highly recommend this board if you plan on using a higher end CPU to overclock as there is a good amount of cooling and support for cooling.
The motherboard came with all the necessary pieces and some nice extras which included a wrist strap (ROG) a fan and mount to provide extra cooling which was all nice. Instructions were easy to read and my computer booted straight away. Would highly recommend this board if you plan on using a higher end CPU to overclock as there is a good amount of cooling and support for cooling.
Austin
20.12.2020
10/10
Оценка пользователя
Великолепно
Many configuration options and overclocking features
I love this product because it comes with Wifi, supports overclocking and has dual M.2. It also provides some overclocking profiles to help simplify the process. I took advantage of the dual M.2 slots and I can say that data transfer is lightning fast when copying data from one to the other. Though I'm not into LED lighting but it looks really cool at night especiall if you have a glass PC case. However, you can turn this off if it is distracting.
After many hours Gaming with overclocked settings (Intel CPU i7 9000K from 3.6 MHz to 5.2 MHz), the system remains stable all the time. It is almost two months since I purchased this product and I haven't noticed any stability issues even with high overclock settings.
I would recommend it to anyone, but if you do not require the WiFi feature, there are cheaper models that support overclocking too.
After many hours Gaming with overclocked settings (Intel CPU i7 9000K from 3.6 MHz to 5.2 MHz), the system remains stable all the time. It is almost two months since I purchased this product and I haven't noticed any stability issues even with high overclock settings.
I would recommend it to anyone, but if you do not require the WiFi feature, there are cheaper models that support overclocking too.
BGLZE
20.12.2020
10/10
Оценка пользователя
Великолепно
Best board for a high end I9 build.
Fantastic motherboard, SUPER high quality as expected.
Only real issue I had was that the pre loading of "Asus Armoury" is outdated, even after a BIOS update.
Recommend getting all the drivers from the ASUS site.
Some ports aren't descripted properly on the manual, for first timers, the manual is rather useless to figure out what ports are where.
However, these are all my personal opinions on the paperwork.
The actual product is great, quiet, subtle RGB features, feature packed.
Easily handes 8 RGB fans and plenty of handy IO.
Weak wifi unless you equip the extender (dongle), the dongle could have done with some kind of side mount or an adhesive or velco to stick to the side of a case or such, the wired, stand design isn't very helpful.
Only real issue I had was that the pre loading of "Asus Armoury" is outdated, even after a BIOS update.
Recommend getting all the drivers from the ASUS site.
Some ports aren't descripted properly on the manual, for first timers, the manual is rather useless to figure out what ports are where.
However, these are all my personal opinions on the paperwork.
The actual product is great, quiet, subtle RGB features, feature packed.
Easily handes 8 RGB fans and plenty of handy IO.
Weak wifi unless you equip the extender (dongle), the dongle could have done with some kind of side mount or an adhesive or velco to stick to the side of a case or such, the wired, stand design isn't very helpful.
Jonathan Collins
20.12.2020
10/10
Оценка пользователя
Великолепно
Excellent all rounder
I recently had planned to upgrade my CPU and so I had to upgrade my motherboard since my old motherboard wasn't compatible, I could have bought a cheaper board but decided to get this one.
I wanted my next motherboard to have a pre-mounted IO shield which at the current time your paying a premium for.
My old motherboard was Asus one and so went with the same manufacturer in hopes doing so I wouldn't have issues with windows and have to re-install it (which never happened, only issue it failed to boot the first time and on the second boot did some eternal checks and runs perfectly)
The most important reason of all was for the RGB, I use Razer synapse with a ASUS aura connect module to control all my RGB so everything is in sync (nothing is as satisfying when all your RGB is in sync)
With my new motherboard and cpu I've been able to over clock it to 5Ghz and is stable, reaching temps of around 70 degrees.
I have had no issues so far and I'm glad I spent the extra money on the motherboard.
I wanted my next motherboard to have a pre-mounted IO shield which at the current time your paying a premium for.
My old motherboard was Asus one and so went with the same manufacturer in hopes doing so I wouldn't have issues with windows and have to re-install it (which never happened, only issue it failed to boot the first time and on the second boot did some eternal checks and runs perfectly)
The most important reason of all was for the RGB, I use Razer synapse with a ASUS aura connect module to control all my RGB so everything is in sync (nothing is as satisfying when all your RGB is in sync)
With my new motherboard and cpu I've been able to over clock it to 5Ghz and is stable, reaching temps of around 70 degrees.
I have had no issues so far and I'm glad I spent the extra money on the motherboard.
Kacper
20.12.2020
8/10
Оценка пользователя
Хорошо
Would be 5 stars if not...
... bent pin in USB 3.0 socket... I was building my new PC today. I put everything together and time for cable management came. HD Audio, front panel cables, chassis fans, AIO cable - everything no troubles until I tried to put USB 3.0 cable. It was going hard, stubborn. So I took it off and using camera did a picture of the inside, and definitely one PIN was bent, luckily the GND one, and USB 3.0 ports on my case are still working. Shame I didn't find it out before applying thermal paste to CPU and fixing whole AIO there. I just didn't want to unscrew everything and start over again. Other than that, everything is fine.
Me and them
20.12.2020
8/10
Оценка пользователя
Хорошо
very good board
This board has it all apart from built-in WIFI and extra SATA connections.
I have 8 SATA drives and this board can only accommodate 6 so bear that in mind, the saving grace are the M.2 connections, which means you will have to buy M.2 SSDs' to take advantage of the ports.
The Aura is easy to configure with the installed software on disc.
This board can easily overclock your processor (provided you have an overclockable CPU) and appropriate cooler and RAM.
Quality board with a lot to offer.
I have 8 SATA drives and this board can only accommodate 6 so bear that in mind, the saving grace are the M.2 connections, which means you will have to buy M.2 SSDs' to take advantage of the ports.
The Aura is easy to configure with the installed software on disc.
This board can easily overclock your processor (provided you have an overclockable CPU) and appropriate cooler and RAM.
Quality board with a lot to offer.
Показаны отзывы 193-216 из 547.
