Отзывы о Материнская плата ASRock H510M-HVS R2.0
394 отзывов пользователей o ASRock H510M-HVS R2.0
Пользовались
ASRock H510M-HVS R2.0?
Поделитесь своим опытом и помогите другим сделать правильный выбор
Skye W
20.12.2020
2/10
Оценка пользователя
Ужасно
DOA
Dead board. No video, fan sounds
spins up, no beeps and nothing else. Getting another sent to me, so I'll update
spins up, no beeps and nothing else. Getting another sent to me, so I'll update
David D. Vanaernam
20.12.2020
6/10
Оценка пользователя
Плохо
Customer support seems to be non-existant
This is an excellent product for quality & performance with AMD Ryzen CPU but Customer Support does not respond to a an Email request that I have sent twice! Several months after using it I decided that I would like to install an M.2 2280 pci.2 SSD as a boot drive in place of an HDD for faster speeds but discovered I didn't have the special mounting screw for mounting it. I sent an email to Asrock Customer Service asking if they could send me a replacement but did not get a response so I resent the request & still have no response. I would have given a 5 star rating if not for this incident.
M. Spangler
20.12.2020
10/10
Оценка пользователя
Великолепно
AS advertised
And it supports the new Ryzen 3200G and 3400G. I was worried I would have to upgrade the BIOS, but no.
l3bowsk1
20.12.2020
6/10
Оценка пользователя
Плохо
Basic budget board; flimsy and poorly manufactured IO shield
I built a budget Linux system on this board, with the following specs:
2x8GB OLOy 3000mhz RGB RAM
AMD Ryzen 3 2200G
Kingston A2000 256GB M.2 NVMe SSD
Corsair 450W modular PSU
CoolerMaster Q300L mATX case
It’s simple to install, although I’d have liked 4 RAM slots, but tbh I’d probably never use them.
The install went mostly smoothly - the CPU tray on the back is secure and it was easy to remove the clips to install the stock heatsink. Uses a 4 pin CPU connector, so CPU upgrade and overclocking/volting options are limited. While I knew about the power and RAM slots going into this because I did my research, it’s still a 4 star product at best due to these limitations. HOWEVER...
My biggest gripe, and worth docking an extra star, was the utterly subpar IO shield. It’s flimsy and bent outward a lot when pushing it into the case with minimal pressure, so now it has a convex shape. Seriously, it felt like I was pushing on tinfoil. In addition, the spring clips designed to put pressure against the motherboard were not bent in enough, and three of them were intruding into the HDMI port when I installed the motherboard in the case. Had I not noticed this, I could have damaged the HDMI port, cable, or worse, shorted the whole thing out when I booted up for the first time.
Since I didn’t want to remove the whole thing to bend the clips back inward, I just grabbed some pliers and bent them back and forth until they snapped off.
An extra 25 cents spent on a sturdier and better made IO shield would have prevented this. In 2020, even on budget systems, IO shields should be of better quality than the ones I used to get in 1995.
That said, Linux install was relatively painless aside from som quirkiness supporting the onboard AMD GPU; I had to try several distros before landing in Linux Mint, which works fine. Considering that other Linux users have had success with the 2200G in various distros, I have to wonder how much of this is due to AMD, and how much is due to this motherboard’s iGPU output implementation. Since Linux support can be dicey, it’s not worth docking another star, but beware if you plan to use this in a cheap Linux build.
2x8GB OLOy 3000mhz RGB RAM
AMD Ryzen 3 2200G
Kingston A2000 256GB M.2 NVMe SSD
Corsair 450W modular PSU
CoolerMaster Q300L mATX case
It’s simple to install, although I’d have liked 4 RAM slots, but tbh I’d probably never use them.
The install went mostly smoothly - the CPU tray on the back is secure and it was easy to remove the clips to install the stock heatsink. Uses a 4 pin CPU connector, so CPU upgrade and overclocking/volting options are limited. While I knew about the power and RAM slots going into this because I did my research, it’s still a 4 star product at best due to these limitations. HOWEVER...
My biggest gripe, and worth docking an extra star, was the utterly subpar IO shield. It’s flimsy and bent outward a lot when pushing it into the case with minimal pressure, so now it has a convex shape. Seriously, it felt like I was pushing on tinfoil. In addition, the spring clips designed to put pressure against the motherboard were not bent in enough, and three of them were intruding into the HDMI port when I installed the motherboard in the case. Had I not noticed this, I could have damaged the HDMI port, cable, or worse, shorted the whole thing out when I booted up for the first time.
Since I didn’t want to remove the whole thing to bend the clips back inward, I just grabbed some pliers and bent them back and forth until they snapped off.
An extra 25 cents spent on a sturdier and better made IO shield would have prevented this. In 2020, even on budget systems, IO shields should be of better quality than the ones I used to get in 1995.
That said, Linux install was relatively painless aside from som quirkiness supporting the onboard AMD GPU; I had to try several distros before landing in Linux Mint, which works fine. Considering that other Linux users have had success with the 2200G in various distros, I have to wonder how much of this is due to AMD, and how much is due to this motherboard’s iGPU output implementation. Since Linux support can be dicey, it’s not worth docking another star, but beware if you plan to use this in a cheap Linux build.
CAM3510
20.12.2020
10/10
Оценка пользователя
Великолепно
Great entry level product
This is a great entry level MoBo for those looking to get into PC gaming. I built a system around this motherboard for a coworker and the system performs as desired.
A major pro for this board is the low cost, which allows you to get into PC building/gaming with lower overhead and leaves plenty of room in the budget for upgrades down the road. The cost savings achieved with this board went straight into a better graphics card.
I was a bit unhappy with the packaging however, amazon felt it was appropriate to simply slap a shipping label on the product retail packaging. Motherboards are fairly notorious from arriving DOA, I've had many over the course of the past decade arrive dead. I was really worried that this product would be dead since it didn't have any shipping protection at all.
A major pro for this board is the low cost, which allows you to get into PC building/gaming with lower overhead and leaves plenty of room in the budget for upgrades down the road. The cost savings achieved with this board went straight into a better graphics card.
I was a bit unhappy with the packaging however, amazon felt it was appropriate to simply slap a shipping label on the product retail packaging. Motherboards are fairly notorious from arriving DOA, I've had many over the course of the past decade arrive dead. I was really worried that this product would be dead since it didn't have any shipping protection at all.
Garrett Steverson
20.12.2020
10/10
Оценка пользователя
Великолепно
Great MB
I've had this installed for a few months now and have had zero issues. I'm not running anything overclocked or anything, just using a simple setup for gaming. I have a 1600af with a MSI 5700xt and it handles them both with ease. (like it should). There isn't anything fancy about it but it performs. The only thing I will say that someone else may run across is that both M.2 slots are not PCIE 3.0. The one labeled ultra is but the second slot is not able to run a PCIE 3.0 M.2. It wasn't clear to me when I bought it but I just wanted to make sure that was clear if someone else reads this review.
Persepolis
20.12.2020
10/10
Оценка пользователя
Великолепно
Great motherboard, trouble-free build with AMD Ryzen 1700
I recently had to replace an Intel-based motherboard in my wife's computer, and had a Ryzen 1700 CPU laying around, so I bought this motherboard for the build. Now... normally, I like to get some hot hardware into my builds and price is less of an issue... but this build was an emergency repair so I wanted something on the cheap. This motherboard was surprisingly good and was much better than I expected for the price range!
Build:
Excellent build quality, everything laid out nicely, lots of fan power headers, sensible layout. Final configuration included a 480GB NVME drive, two 2TB Western Digital Caviars in soft-RAID-1 configuration, Nvidia GTX670 GPU, Ryzen 1700 CPU, and 16GB of Crucial 2400 work-horse DDR4 (two-by-eight).
Install:
The CPU and RAM installed on the first try, and POSTed on the first try. I moved the NVME drive over from the Intel build and bam... in business! Windows 10 updated all the drivers and the system was up and running. I'd say from the box to POST, I probably spent about 35 minutes on this build. USB3 worked... Ethernet worked... everything worked... no surprises.
Other thoughts:
Manual seems to be printed in like 4pt font in places. Not a show-stopper, but a few times I had to take a picture of the jumper diagrams with my phone and zoom in... again, minor issue and not a show-stopper. In retrospect, next time, I'll pull the manual PDF onto a laptop and use it instead.
Verdict:
Buy it.
Build:
Excellent build quality, everything laid out nicely, lots of fan power headers, sensible layout. Final configuration included a 480GB NVME drive, two 2TB Western Digital Caviars in soft-RAID-1 configuration, Nvidia GTX670 GPU, Ryzen 1700 CPU, and 16GB of Crucial 2400 work-horse DDR4 (two-by-eight).
Install:
The CPU and RAM installed on the first try, and POSTed on the first try. I moved the NVME drive over from the Intel build and bam... in business! Windows 10 updated all the drivers and the system was up and running. I'd say from the box to POST, I probably spent about 35 minutes on this build. USB3 worked... Ethernet worked... everything worked... no surprises.
Other thoughts:
Manual seems to be printed in like 4pt font in places. Not a show-stopper, but a few times I had to take a picture of the jumper diagrams with my phone and zoom in... again, minor issue and not a show-stopper. In retrospect, next time, I'll pull the manual PDF onto a laptop and use it instead.
Verdict:
Buy it.
Cesar
20.12.2020
2/10
Оценка пользователя
Ужасно
Described supporting 3200 MHz DDR4 memory but does not. I'm returning 2 of these boards as a result.
I am in the process of upgrading several computers in my home. The first one that went through the upgrade received a motherboard-CPU combo that was being offered at the time, namely:
ASUS ROG Strix B450-F Gaming
AMD Ryzen 5 3600 6-Core, 12-Thread Unlocked Desktop Processor with Wraith Stealth Cooler
When I decided to upgrade the other two systems, the motherboard-CPU combo was no longer available, so I tried to find a comparable motherboard that could be mated with the Ryzen 5 3600. The ASRock B450M PRO4 AM4 had good reviews, and was less expensive, so I opted for this one. Note that both the ASUS and ASRock motherboards claim to support 3200 MHz DDR4 memory.
ASUS: Powered by 2nd generation AMD Ryzen AM4 and 7th generation Athlon processors to maximize connectivity and speed with dual NVMe M.2, USB 3.1 Gen2, gigabit LAN and up to 64 Gigabytes of DDR4 (3200 Megahertz)
from https://smile.amazon.com/gp/product/B07FKTZC4M/
The ASUS manual also specifically states that the following memory modules are supported: 4 x DIMM max. 64 GB, DDR4 3200(O.C.) / 3000(O.C.) / 2933(O.C.) / 2800(O.C.) / 2666 / 2400 / 2133 MHz, un-buffered memory
from: https://images-na.ssl-images-amazon.com/images/I/C1iEgPZSvxS.pdf
ASRock: Memory 4x DDR4-3200+(OC)/2933/2667/2400/2133 DIMM Slots Dual Channel ECC Non-ECC Unbuffered Max Capacity of 64GB (AMD Ryzen series CPUs (Pinnacle Ridge))
So I bought two of these motherboards, along with 2 AMD Ryzen 5 3600, and two set of 2x16 TEAMGROUP T-Force Dark Z DDR4 32GB Kit (2 x 16GB) 3200MHz
https://smile.amazon.com/gp/product/B07WRR3Q33/
I installed everything in one board, and found that the computer while booting, was emitting beeping sounds. This happened whether I had 1 or 2 sticks of memory on the board. When I removed both sticks, the beeping went away, but of course, the computer won't finish booting with no memory.
I then took the two sticks of memory and put them into the first computer I upgraded. The computer booted fine, recognized all 32 GB of memory and loaded the OS.
Bottom line - this motherboard does not support 3200 MHz DDR4 RAM (at least not in the configuration I received it) so I am going back to a known quantity. I am returning both of the ASRock motherboards, and replacing them with ASUS TUF (I need an mATX and the ROG is a full ATX size).
ASUS ROG Strix B450-F Gaming
AMD Ryzen 5 3600 6-Core, 12-Thread Unlocked Desktop Processor with Wraith Stealth Cooler
When I decided to upgrade the other two systems, the motherboard-CPU combo was no longer available, so I tried to find a comparable motherboard that could be mated with the Ryzen 5 3600. The ASRock B450M PRO4 AM4 had good reviews, and was less expensive, so I opted for this one. Note that both the ASUS and ASRock motherboards claim to support 3200 MHz DDR4 memory.
ASUS: Powered by 2nd generation AMD Ryzen AM4 and 7th generation Athlon processors to maximize connectivity and speed with dual NVMe M.2, USB 3.1 Gen2, gigabit LAN and up to 64 Gigabytes of DDR4 (3200 Megahertz)
from https://smile.amazon.com/gp/product/B07FKTZC4M/
The ASUS manual also specifically states that the following memory modules are supported: 4 x DIMM max. 64 GB, DDR4 3200(O.C.) / 3000(O.C.) / 2933(O.C.) / 2800(O.C.) / 2666 / 2400 / 2133 MHz, un-buffered memory
from: https://images-na.ssl-images-amazon.com/images/I/C1iEgPZSvxS.pdf
ASRock: Memory 4x DDR4-3200+(OC)/2933/2667/2400/2133 DIMM Slots Dual Channel ECC Non-ECC Unbuffered Max Capacity of 64GB (AMD Ryzen series CPUs (Pinnacle Ridge))
So I bought two of these motherboards, along with 2 AMD Ryzen 5 3600, and two set of 2x16 TEAMGROUP T-Force Dark Z DDR4 32GB Kit (2 x 16GB) 3200MHz
https://smile.amazon.com/gp/product/B07WRR3Q33/
I installed everything in one board, and found that the computer while booting, was emitting beeping sounds. This happened whether I had 1 or 2 sticks of memory on the board. When I removed both sticks, the beeping went away, but of course, the computer won't finish booting with no memory.
I then took the two sticks of memory and put them into the first computer I upgraded. The computer booted fine, recognized all 32 GB of memory and loaded the OS.
Bottom line - this motherboard does not support 3200 MHz DDR4 RAM (at least not in the configuration I received it) so I am going back to a known quantity. I am returning both of the ASRock motherboards, and replacing them with ASUS TUF (I need an mATX and the ROG is a full ATX size).
M. Dillon
20.12.2020
10/10
Оценка пользователя
Великолепно
Solid motherboard / Zen 2 update!
This is a solid micro-atx motherboard. My only complaint is that ASRock seems to have removed the PPT power limit setting in its newest BIOSes, instead requiring us to play with other BIOS settings (half of which don't do anything, or require an undocumented combination of settings in order to do something) to get the desired power envelope. It was a LOT easier when the BIOS simply allowed me to slap in the socket wattage I wanted.
I will still give it 4 stars (one star docked for their BIOS issues). Board quality is excellent. Overclockability is excellent. The VRMs have proper heatsinks but don't overdo it with extra fans. Its a nice micro-atx motherboard. I will be throwing a Zen 2 CPU into it as soon as they come out.
-Matt
UPDATE! I successfully popped a 3900X into this motherboard. Be sure to update your BIOS first! This particular motherboard with its latest BIOS took the 3900X without any serious issues and will push 150W into the CPU socket, so it does a good job running it. Also, with a Zen 2 CPU you *can* now set the PPT power cap (which is the best way to match your system's cooling capability to the CPU). It's a bit hit or miss finding the PPT field that actually does something, but it works. Its in CBS/NBIO and.. futz I can't reboot right now but it isn't the PPT setting in the XFR sub-menu, it's in another sub-menu under NBIO. You'll find it. Always verify with a kill-a-watt meter. I do NOT recommend trying to overclock with these early BIOSes. If you are reading this review two months or later after the Zen 2 release, the BIOS is probably fine.
Increasing from 4 stars to 5 stars.
I will still give it 4 stars (one star docked for their BIOS issues). Board quality is excellent. Overclockability is excellent. The VRMs have proper heatsinks but don't overdo it with extra fans. Its a nice micro-atx motherboard. I will be throwing a Zen 2 CPU into it as soon as they come out.
-Matt
UPDATE! I successfully popped a 3900X into this motherboard. Be sure to update your BIOS first! This particular motherboard with its latest BIOS took the 3900X without any serious issues and will push 150W into the CPU socket, so it does a good job running it. Also, with a Zen 2 CPU you *can* now set the PPT power cap (which is the best way to match your system's cooling capability to the CPU). It's a bit hit or miss finding the PPT field that actually does something, but it works. Its in CBS/NBIO and.. futz I can't reboot right now but it isn't the PPT setting in the XFR sub-menu, it's in another sub-menu under NBIO. You'll find it. Always verify with a kill-a-watt meter. I do NOT recommend trying to overclock with these early BIOSes. If you are reading this review two months or later after the Zen 2 release, the BIOS is probably fine.
Increasing from 4 stars to 5 stars.
Brian
20.12.2020
6/10
Оценка пользователя
Плохо
1st one DOA, replacement is either open box or refurb
Update, replacement board arrived. It works but unlike the new one I purchase. This one was very clearly either refurbished or at the very least open box. Manual was all crumpled and had dirty finger smudges, ESD bag not sealed, and wrinkled. Board looked good so if refurb is a good one at least.
I’m happy with install, features and performance so far but hard to trust a product that first shipped DOA, and replacement is not in “new” condition.
1 star for now. 1st one was DOA, working power supply but absolutely nothing when trying to turn on. No PSU fan soon no cpu fan spin, notta.
It happens so I will update when I get my replacement, as usual amazon is fantastic about replacing a defective item.
So far I really do like the layout, it pairs so perfectly with my Coolermaster Master Box q300L cable management will be super simple, and I love how the SATA connectors are at 90 degree angle I’ll let you know how the replacement works.
I’d say avoid it if you don’t have the time or patience so far.
I’m happy with install, features and performance so far but hard to trust a product that first shipped DOA, and replacement is not in “new” condition.
1 star for now. 1st one was DOA, working power supply but absolutely nothing when trying to turn on. No PSU fan soon no cpu fan spin, notta.
It happens so I will update when I get my replacement, as usual amazon is fantastic about replacing a defective item.
So far I really do like the layout, it pairs so perfectly with my Coolermaster Master Box q300L cable management will be super simple, and I love how the SATA connectors are at 90 degree angle I’ll let you know how the replacement works.
I’d say avoid it if you don’t have the time or patience so far.
Dirty
20.12.2020
10/10
Оценка пользователя
Великолепно
Great Motherboard for Everyday Gamer -- Especially for Price
I built a computer for a client for him to use as a gaming computer for him and his younger daughters. He is not an intense gamer, but does throw down some when his brothers and friends are over. He has used this for a couple months now and said it is outstanding for playing every game he does. He plays all the top RPG's and other games as everyone else. Coupled with the right memory, fans, case and other components this motherboard is more than enough for the vast majority of games. I am not a huge AMD fan, but would definitely use this for myself.
DeaconGary
20.12.2020
2/10
Оценка пользователя
Ужасно
2 defective boards
I really liked the specs on this board. However, the first board booted, fans ran and I could see the HDD lile flicker, but no video out, on HDMI, VGA or DVI. I returned the board. The 2nd board won't power up, not even the fans are running. I'm very disappointed as I have used Asrock boards before and found them satisfactory.
I will look for a different B450 board and return this one
I will look for a different B450 board and return this one
R. Suss
20.12.2020
10/10
Оценка пользователя
Великолепно
Works great - good features for price
I used this in a 3600x build. Booted up on first try. Memory works at 3000mhz, 3200 is a bit unstable.. which is unfortunate but nothing major. System is rock solid. No crashes or blue screens. Sleep works every time. Windows and games are fast and smooth. Very happy with the price to performance and features that this board has (usb c, gigabit ethernet, many usb 3 ports, 4 ram slots, 2 x m2 slots). I considered more expensive boards like the tomahawk, but really I think this is a much better value. Highly recommended.
Rolando Interiano
20.12.2020
2/10
Оценка пользователя
Ужасно
Stopped working just a little after a year.
On paper, this seems like an amazing deal for a Pinnacle Ridge mobo in a Micro ATX form factor. I even got it for less than $80. It even supports 4 additional fans apart from the CPU fan. Amazing deal overall.
That is, until it starts giving you trouble. My system now randomly shuts down all the time. Tested for software and hardware issues and in the end I could only pinpoint the issue down to the motherboard. Something that I should have suspected from the beginning, considering that the system would not boot if I plugged into one of it's USB 3 connectors.
I would not recommend buying the "cheap Asus" if you are looking for a motherboard that will last you longer than a year.
That is, until it starts giving you trouble. My system now randomly shuts down all the time. Tested for software and hardware issues and in the end I could only pinpoint the issue down to the motherboard. Something that I should have suspected from the beginning, considering that the system would not boot if I plugged into one of it's USB 3 connectors.
I would not recommend buying the "cheap Asus" if you are looking for a motherboard that will last you longer than a year.
Cb
20.12.2020
2/10
Оценка пользователя
Ужасно
Two failed in a row, avoiding ASRock in the future
Built a system with this mobo, after about 2 months the USB ports started to fail one by one until none worked. Second board the AUX audio port didn't work but made do with it until about 2 months in. Now it's shutting down randomly and won't reliability turn back on. So now I have another brick. Unless ASRock can provide a working board I'm never buying from them again.
Amazon Customer
20.12.2020
10/10
Оценка пользователя
Великолепно
Decent basic budget board with a little flair.
This is a good budget build MB. Do you just want to build a basic gaming rig at a decent value? This board does the trick. My set up is 1 sata ssd, 1 HDD, Ryzen 1600 AF, GTX 1660 super and 3 fans.
It has 2 fan headers which ain't bad if you're going for a basic build. You can add an AIO but at that point you're no longer budget building and just get a Tomahawk.
It also has a 3 pin and 4 pin rgb headers. ASRock has a program you can download to control them from your desktop.
In all not a bad buy if you want a basic setup with a little bit of flair. Just remember ALL B450 boards won't support the new Zen 3 chips coming out in fall.
Edit: Add pic of the rig I built. I'm running g. Skill 3200 ram. I overclocked my Ryzen 5 1600 AF to 3.8mhz stable. I'm actually impressed with the ASRock Utility app which you can get on their website. I also figured out how to control rbg with ASRock rbg app.
A great buy at under $80.
It has 2 fan headers which ain't bad if you're going for a basic build. You can add an AIO but at that point you're no longer budget building and just get a Tomahawk.
It also has a 3 pin and 4 pin rgb headers. ASRock has a program you can download to control them from your desktop.
In all not a bad buy if you want a basic setup with a little bit of flair. Just remember ALL B450 boards won't support the new Zen 3 chips coming out in fall.
Edit: Add pic of the rig I built. I'm running g. Skill 3200 ram. I overclocked my Ryzen 5 1600 AF to 3.8mhz stable. I'm actually impressed with the ASRock Utility app which you can get on their website. I also figured out how to control rbg with ASRock rbg app.
A great buy at under $80.
CheeseManFuu
20.12.2020
6/10
Оценка пользователя
Плохо
Ships with BIOS version not suitable for Ryzen 2nd Gen- its intentionally meant to support it.
Of all the micro ATX form factor motherboards out there, this one is absolutely one of the most feature-packed while still not breaking the bank with its very generous pricetag:
- native USB-C Port
- 4 DIMM slots
- 2 M.2 Slots
- 2 16x and 1 1x PCI-E Slots
- 4 SATA ports
- 5 USB-A 3.0 ports
But, it comes shipped with its BIOS ver. 3.60, which phases out support for the Pinnacle, Raven, Summit, and Bristal Ridge architectures, which means only Athlon (good luck) and Ryzen 3rd Gen CPUs will be able to even post. And ASRock doesn't even have a Firmware Flashback function unless you submit it to ASRock themselves, wait possibly weeks for them to flash a new version, when instead you could get a slightly less feature-rich AM4 board from a local electronics store for about a sliver of the time.
Also, rumor has it that if you have an M.2 plugged in whatsoever, you cannot boot from SATA. Can't confirm this personally, but there's definitely a handful of others who have.
I got this for my very techy step-father for Christmas, since before he was only running a 4th gen i7, only to quickly be let down since his Ryzen 5 2600 couldn't work on it, and was quickly refunded.
- native USB-C Port
- 4 DIMM slots
- 2 M.2 Slots
- 2 16x and 1 1x PCI-E Slots
- 4 SATA ports
- 5 USB-A 3.0 ports
But, it comes shipped with its BIOS ver. 3.60, which phases out support for the Pinnacle, Raven, Summit, and Bristal Ridge architectures, which means only Athlon (good luck) and Ryzen 3rd Gen CPUs will be able to even post. And ASRock doesn't even have a Firmware Flashback function unless you submit it to ASRock themselves, wait possibly weeks for them to flash a new version, when instead you could get a slightly less feature-rich AM4 board from a local electronics store for about a sliver of the time.
Also, rumor has it that if you have an M.2 plugged in whatsoever, you cannot boot from SATA. Can't confirm this personally, but there's definitely a handful of others who have.
I got this for my very techy step-father for Christmas, since before he was only running a 4th gen i7, only to quickly be let down since his Ryzen 5 2600 couldn't work on it, and was quickly refunded.
Derrick
20.12.2020
10/10
Оценка пользователя
Великолепно
Great motherboard if on a budget!
This was a great motherboard that I used for a budget gaming build. I paired it with a Ryzen 3 2200G processor and it worked fine out of the box. I was able to install two 4GB RAM sticks which is all the customer wanted installed. I also like that the motherboard has the ability for Hyper-V which the customer also needed for work purpose. You can also control case fans speed from the BIOS. Overall, this a good budget motherboard and only thing I suggest is going to the manufacturer website to make sure all components you want to install are compatible first.
C. Ha
20.12.2020
10/10
Оценка пользователя
Великолепно
A steal at 20% off Warehouse deals for a brand new motherboard!
I needed to build a spare computer for my sister in law so she could draw and stream at the same time. I threw my old Ryzen 5 1600 on this board and it works perfectly. Sure, the VRMs are probably basement bargain and they don't even have heatsinks on it, but at stock speeds, it should be absolutely fine. The board came in a brown box but had all accessories inside. 24 hour burn in test passed successfully and the sister in law is very happy with her new snappy computer. $40 for a AM4 board is a steal!
Jorge Mendez
20.12.2020
8/10
Оценка пользователя
Хорошо
Nice Mother Board
Asrock B450M Pro4 is a really nice mother board it performs almost as I expected.
It has cooled VRM, two M.2 slots, only 1 is Ultra M.2 (MVNe), lots of connectivity (USB, USB 3.0, USB3.1 USB type C, HDMI, DVI, VGA)
A good thing about this MOBO is that it comes Ryzen 3000 Ready.
There are 2 things I wish I knew before I bought it:
1.- I think the BIOS-UEFI does not have all features I have seen in other MOBOS.
2.- The RGB control on this bord is not what I was expecting it is very wonky.
It has cooled VRM, two M.2 slots, only 1 is Ultra M.2 (MVNe), lots of connectivity (USB, USB 3.0, USB3.1 USB type C, HDMI, DVI, VGA)
A good thing about this MOBO is that it comes Ryzen 3000 Ready.
There are 2 things I wish I knew before I bought it:
1.- I think the BIOS-UEFI does not have all features I have seen in other MOBOS.
2.- The RGB control on this bord is not what I was expecting it is very wonky.
Adam
20.12.2020
8/10
Оценка пользователя
Хорошо
Can't get the top M.2 port to boot my OS
overall I think this board has a lot for being a micro atx. 2x m.2 ports. 2x pci 16x. 4 slots for ram. it is really nice for the form factor and what you get. the issue i ran into was that I had my nvme drive in the top m.2 drive slot and couldnt get the computer to boot into my OS until i moved the drive to the lower slot. I will have to see if it is a dead m.2 slot or just needs to be configured in bios. I have never had an issue like that before so i was surprised.
Amazon Customer
20.12.2020
8/10
Оценка пользователя
Хорошо
Can Handle Mild Overclocks, Dont Push Harder Overclocks On 2nd Gen Ryzen 5/7 X Variant CPUs
Used for a three months now. Have paired with a 2600x and 16gb delta rgb 3000mhz cl16 ram. It's good for what you get on a budget.
Pros:
Enough SATA ports for up to 4 HDDs/SSDs for starters.
2 M.2 Slots (1 NVMe x 1 Sata 3)
Enough space for GPU and Pcie Wifi
Can do mild overclocking (have 2600x at 4ghz with 1.2375v and -100mv vcore offset, never BSOD'd once)
Cons:
3+3 phase VRMs
Don't hard overclock, especially with 2nd/3rd gen Ryzen 5/7 x variants (stated above)
If you have a SATA M.2 installed on the SATA III M.2 slot, you lose a SATA port.
If you have a 2600x on this board. Don't use PBO (Precision Boost Overdrive), stick with a mild overclock of something like 4ghz at 1.2375v with a vcore offset of -100mv. Or stock settings.
Mine runs stable and never exceeds 1.14v. Have touched the VRMs multiple times whilst in stress tests for an hour, they never got hot and you still get the respected performance whilst not cooking VRMs.
If you want a better motherboard for hard overclocks, try and find a used b450 Tomahawk for under $80 through Amazon Warehouse. You'll have a better time and will get the most performance out of the 2600x on a Tomahawk. If you don't plan on overclocking, then this motherboard is fine at stock, you can still undervolt the cpu if need be. My Gammaxx 400 (extra fan attached) keeps my 2600x at around 35c max in ambient of 14c with current OC settings.
Pros:
Enough SATA ports for up to 4 HDDs/SSDs for starters.
2 M.2 Slots (1 NVMe x 1 Sata 3)
Enough space for GPU and Pcie Wifi
Can do mild overclocking (have 2600x at 4ghz with 1.2375v and -100mv vcore offset, never BSOD'd once)
Cons:
3+3 phase VRMs
Don't hard overclock, especially with 2nd/3rd gen Ryzen 5/7 x variants (stated above)
If you have a SATA M.2 installed on the SATA III M.2 slot, you lose a SATA port.
If you have a 2600x on this board. Don't use PBO (Precision Boost Overdrive), stick with a mild overclock of something like 4ghz at 1.2375v with a vcore offset of -100mv. Or stock settings.
Mine runs stable and never exceeds 1.14v. Have touched the VRMs multiple times whilst in stress tests for an hour, they never got hot and you still get the respected performance whilst not cooking VRMs.
If you want a better motherboard for hard overclocks, try and find a used b450 Tomahawk for under $80 through Amazon Warehouse. You'll have a better time and will get the most performance out of the 2600x on a Tomahawk. If you don't plan on overclocking, then this motherboard is fine at stock, you can still undervolt the cpu if need be. My Gammaxx 400 (extra fan attached) keeps my 2600x at around 35c max in ambient of 14c with current OC settings.
Andrew M
20.12.2020
10/10
Оценка пользователя
Великолепно
Just works,out of the box, with Ryzen 3 2200G
Using this with a Ryzen 3 2200G and 2x8GB ADATA XPG DDR4-3000. Everything worked out of the box.
Pay attention to where the motherboard tells you to install the RAM modules for best performance - initially I just bunged them into the 2 slots closest to the CPU, and was only able to get them to run at DDR4-2133 with no XMP option available. Then I re-read the manual, and noted that it is explicit about installing dual-channel memory into the 2nd and 4th slots (where the 1st slot is the one closest to the CPU). I moved them, fired it up again, selected the XMP profile in the BIOS, and bingo! DDR4-3000 operating perfectly.
I am a fan of ASRock motherboards for AMD systems, so I am slightly biased - I have used them before, and currently have ASRock B450 boards in both my Ryzen systems, and so far I have had no issues and have been very happy with them.
Pay attention to where the motherboard tells you to install the RAM modules for best performance - initially I just bunged them into the 2 slots closest to the CPU, and was only able to get them to run at DDR4-2133 with no XMP option available. Then I re-read the manual, and noted that it is explicit about installing dual-channel memory into the 2nd and 4th slots (where the 1st slot is the one closest to the CPU). I moved them, fired it up again, selected the XMP profile in the BIOS, and bingo! DDR4-3000 operating perfectly.
I am a fan of ASRock motherboards for AMD systems, so I am slightly biased - I have used them before, and currently have ASRock B450 boards in both my Ryzen systems, and so far I have had no issues and have been very happy with them.
Amazon Customer
20.12.2020
10/10
Оценка пользователя
Великолепно
Out of the box Ryzen 3000 compatibility
Something that's important to note is this motherboard worked out of the box with my R7 3800X, no bios update required. It even has the "Works with Ryzen 3000" sticker on the box. Not sure why they're not advertising this anywhere online, perhaps because not all the shipped units have the new BIOS?
Either way, works perfectly as a replacement for my DOA MSI B450M GAMING PLUS (which did require a bios update, then failed to post).
Either way, works perfectly as a replacement for my DOA MSI B450M GAMING PLUS (which did require a bios update, then failed to post).
Показаны отзывы 49-72 из 394.
Похожие товары с лучшей оценкой
Wizemart © 2026.
Рекомендательная система по умному выбору товаров по отзывам и рейтингам
