Отзывы о Материнская плата ASRock H510M-HVS R2.0
393 отзывов пользователей o ASRock H510M-HVS R2.0
Пользовались
ASRock H510M-HVS R2.0?
Поделитесь своим опытом и помогите другим сделать правильный выбор
Nealosis
20.12.2020
10/10
Оценка пользователя
Великолепно
Ryzen 3600 Works Without BIOS Flash!
It was a tense few hours since everything hinged on that part in the build where you say a prayer, take a deep breath, and then hit the power button. Will it turn on? Will it do nothing? Will sparks fly from the PSU? Will the fans spin up? To our relief (I am teaching my son how to assemble a computer), it fired right up! The board ships with BIOS Rev. 3.90 which, as of 4/26/2020, is the latest version. Installation was smooth as silk..
Lucki
20.12.2020
4/10
Оценка пользователя
Ужасно
Nearly Impossible to install Win10
Some combination of this board, and the Seagate hybrid drive I purchased made it nearly impossible to install Windows. I've been building and working with computers for 20+ years, and after sinking 8+ hours of my own time, payed a local tech for 1.5 hours of his time to finally get the OS installed. Default BIOS settings were not compatible, and the drive had to be formatted multiple times in another machine.
Al Harrison
20.12.2020
10/10
Оценка пользователя
Великолепно
Great Price
Always a Dell/Intel/MS user, I decided to do my first build since the IBM PC days (in the '80's).
Keen on both quality and value, I did a lot research before making the purchase.
I went with AMD this time, selecting the Ryzen 3 2200G as a great entry-level CPU.
Mounted the CPU, cooler and 16GB of ram, then hooked up the two PSU cables.
Used an old VGA monitor to test, plugged in the PSU and flipped the switch.
Boom, BIOS baby!
Turning it off, I added a Samsung 250GB NVMe SSD in the M.2 slot to make it a speed demon.
I then inserted a USB drive with Windows (a prior download from MS on my old PC).
Windows installation took only 15 minutes, and the system reboots in under 60 seconds!
Color me pleased. :)
The only thing I have against this motherboard is what others have said: the IO shield is a shame.
It may help to use a black marker with a very fine point to color the indents.
Follow up with an alcohol or solvent pad to clean up any stray marks.
Keen on both quality and value, I did a lot research before making the purchase.
I went with AMD this time, selecting the Ryzen 3 2200G as a great entry-level CPU.
Mounted the CPU, cooler and 16GB of ram, then hooked up the two PSU cables.
Used an old VGA monitor to test, plugged in the PSU and flipped the switch.
Boom, BIOS baby!
Turning it off, I added a Samsung 250GB NVMe SSD in the M.2 slot to make it a speed demon.
I then inserted a USB drive with Windows (a prior download from MS on my old PC).
Windows installation took only 15 minutes, and the system reboots in under 60 seconds!
Color me pleased. :)
The only thing I have against this motherboard is what others have said: the IO shield is a shame.
It may help to use a black marker with a very fine point to color the indents.
Follow up with an alcohol or solvent pad to clean up any stray marks.
TMD
20.12.2020
10/10
Оценка пользователя
Великолепно
Work as adverstised, this is my first gaming pc build.
I did a lot of research before deciding on Asrock B450M Pro4, with AMD ryzen 5 3600, MSI GeForce 1650. Installation took me 3 days with running into couple of problems.
1. The first problem was after I put all component together, the pc could NOT "boot"(POST).
The issue was that I did not connect PCI-express power to graphic card.
There are some difficult locating usb connector, front panel header and chassis fan(one with 3pin instead of 4pin).
2. After taking all parts out and put one thing in at a time to test, I could not connect monitor to on-board VGA port. Later I found out that there is NO built-in graphic with my combination of Asrock B450M and AMD Ryzen 3600. You must install external graphic card to connect to monitor.
3. After putting parts back again correctly, I was able to boot the pc into bios mode. Asrock bios mode is easy to work with.
I was able to install Windows from "bootable media usb" and installed Windows to SSD with ease. After using windows for about 30min, my system got shutdown unexpectedly. It happened for couple of times until I found out that the cpu was overheating. Its temperature was around 95 degree Celsius at idle time. Finally I found out that I did not tighten the cpu cooler fan enough to cpu. You supposed to tighten the cpu fan touching the cpu. The thermal paste helps keep cpu cool. After adjusting and tightening the fan sink enough to the cpu, the cpu temperature went down significantly.
Now my pc is in stable state. We were able to play Fornite without cpu overheating. The computer is fast and responsive. The fps rate is high when playing Fortnite, thanks to GTX 1650 GPU.
1. The first problem was after I put all component together, the pc could NOT "boot"(POST).
The issue was that I did not connect PCI-express power to graphic card.
There are some difficult locating usb connector, front panel header and chassis fan(one with 3pin instead of 4pin).
2. After taking all parts out and put one thing in at a time to test, I could not connect monitor to on-board VGA port. Later I found out that there is NO built-in graphic with my combination of Asrock B450M and AMD Ryzen 3600. You must install external graphic card to connect to monitor.
3. After putting parts back again correctly, I was able to boot the pc into bios mode. Asrock bios mode is easy to work with.
I was able to install Windows from "bootable media usb" and installed Windows to SSD with ease. After using windows for about 30min, my system got shutdown unexpectedly. It happened for couple of times until I found out that the cpu was overheating. Its temperature was around 95 degree Celsius at idle time. Finally I found out that I did not tighten the cpu cooler fan enough to cpu. You supposed to tighten the cpu fan touching the cpu. The thermal paste helps keep cpu cool. After adjusting and tightening the fan sink enough to the cpu, the cpu temperature went down significantly.
Now my pc is in stable state. We were able to play Fornite without cpu overheating. The computer is fast and responsive. The fps rate is high when playing Fortnite, thanks to GTX 1650 GPU.
Joseph Stackhouse
20.12.2020
10/10
Оценка пользователя
Великолепно
Great Value
Great motherboard for the cost. We use this in our Ryzen Office Computer builds, pair it with a 2200g or 3200g and it's great. Triple monitor support is a bonus, has PS/2 connectors if someone wants to use their ancient keyboard/mouse. We love these for budget builds and have built over 20 computers using this motherboard with no issues.
Christian B Reyes
20.12.2020
10/10
Оценка пользователя
Великолепно
It works!
It works as advertised. Work out of the box with my Ryzen 3 2200g. Has 2 case fan connectors which is nice for such a cheap mobo. Easy to work on.
Mason L
20.12.2020
10/10
Оценка пользователя
Великолепно
This motherboard blows my mind!
This motherboard blows my mind for its price and size. It offers so much. This is a MicroATX board but has way more expandability than I would have expected. It has 2 M.2 SSD slots (one of which is for NVME), 4 RAM slots (up to 64GB), and 2 PCI-E slots. The back IO also has a lot of connections, including micro-USB, 5 USB 3.0, 2 USB 2.0, HDMI, VGA, and DVI. It is extremely versatile!
I used this with an AMD Ryzen 3 2200G processor and so far everything has worked out great.
The only bad thing is that the IO shield is just a plain silvery color, and is not the most attractive. But hey, it's going to be in the back of your computer so you won't see it, right?
This offers a lot for the budget, so I think is a solid choice if budget is your concern.
I used this with an AMD Ryzen 3 2200G processor and so far everything has worked out great.
The only bad thing is that the IO shield is just a plain silvery color, and is not the most attractive. But hey, it's going to be in the back of your computer so you won't see it, right?
This offers a lot for the budget, so I think is a solid choice if budget is your concern.
Eric W
20.12.2020
10/10
Оценка пользователя
Великолепно
Good bang for the buck
I needed to throw together as many cores and as much ram as possible for work for as cheap as possible. This motherboard paired with a WD Black NVME SSD, 64GB of RAM and a Ryzen 7 2700 makes for a potent little workstation. For now I'm getting by with just the M.2 NVME drive, as others have said, there are restrictions on how many sata ports remain functional when you use the second M.2 slot. If that's important to you, read the manual from Asrock's website first to understand the limitations. Shouldn't be an issue for me though.
I was able to OC the Ryzen 7 2700 to 4050MHz on all cores at 1.35V. The memory impressed me, able to OC to 2933MHz at 1.25V and ok timings of 16-18-18-18-35. Normally Ryzen struggles with memory OC with four dual rank DIMMs but it handles it just fine.
The UEFI interface is a little weird and some things are buried in obscure places. Maybe it's an Asrock thing, or maybe its a Ryzen thing, not sure as this is my first AMD platform in over a decade.
I was able to OC the Ryzen 7 2700 to 4050MHz on all cores at 1.35V. The memory impressed me, able to OC to 2933MHz at 1.25V and ok timings of 16-18-18-18-35. Normally Ryzen struggles with memory OC with four dual rank DIMMs but it handles it just fine.
The UEFI interface is a little weird and some things are buried in obscure places. Maybe it's an Asrock thing, or maybe its a Ryzen thing, not sure as this is my first AMD platform in over a decade.
Amazon Customer
20.12.2020
6/10
Оценка пользователя
Плохо
Excellent Ryzen 3 budget board with unexpected nuances.
Bought this used. It seems like a pretty good budget board.
The package includes the board, a manual, an install CD, and 2 SATA cables (unknown which version, 1 straight and 1 with a right angle on one side).
This board should come flashed with a bios that is ryzen 3 compatible (mine was manufacturer flashed to bios version 3.31 and was used so newer ones should be a further bios version). This board can be used for IOMMU passthrough, although I myself had issues doing a gpu passthrough due to a lack of system experience. I will note, that only the pcie2 slot is actually an isolated group, as the pcie3 slot is combined with the ethernet slot.
Seemingly has a decent vrm. It is good to see that it has a thunderbolt connector, along with its excellent IO options. The IO shield is flimsy and stamped out of a single piece of metal without paint.
The super speed M.2 and Sata ports work. Both devices (M.2 and HDD) seem to be performing up to expectation as far as speed is concerned
It comes with 4 ram slots. However, to run high-speed, overclockable memory modules, only 1 channel (memory slots 2 and 4) actually works. My board also doesn't have error beeps when the system fails to boot as well.
This board has a reversed PCIe configuration. The PCIe3 slot is below the PCIe2 slot. To most people, the bandwidth difference will mean very little since most graphics cards are below the bandwidth of the PCIe2 slot
Just a general warning to anyone using a matx board with 2 graphics cards in a matx case or someone dead-set on using a 2+ width graphics card in the PCIe3 slot with this board:
4 expansion slots on the matx case will not be able to accommodate the lower graphics card unless it is a single width card.
**Update**
I bought mine used, and paid the price for it. The used model has a broken port. I had to buy an additional sound card to plug in headphones. Buy new if you have the option, or if you plan to use the hdmi sound or an external sound card.
The package includes the board, a manual, an install CD, and 2 SATA cables (unknown which version, 1 straight and 1 with a right angle on one side).
This board should come flashed with a bios that is ryzen 3 compatible (mine was manufacturer flashed to bios version 3.31 and was used so newer ones should be a further bios version). This board can be used for IOMMU passthrough, although I myself had issues doing a gpu passthrough due to a lack of system experience. I will note, that only the pcie2 slot is actually an isolated group, as the pcie3 slot is combined with the ethernet slot.
Seemingly has a decent vrm. It is good to see that it has a thunderbolt connector, along with its excellent IO options. The IO shield is flimsy and stamped out of a single piece of metal without paint.
The super speed M.2 and Sata ports work. Both devices (M.2 and HDD) seem to be performing up to expectation as far as speed is concerned
It comes with 4 ram slots. However, to run high-speed, overclockable memory modules, only 1 channel (memory slots 2 and 4) actually works. My board also doesn't have error beeps when the system fails to boot as well.
This board has a reversed PCIe configuration. The PCIe3 slot is below the PCIe2 slot. To most people, the bandwidth difference will mean very little since most graphics cards are below the bandwidth of the PCIe2 slot
Just a general warning to anyone using a matx board with 2 graphics cards in a matx case or someone dead-set on using a 2+ width graphics card in the PCIe3 slot with this board:
4 expansion slots on the matx case will not be able to accommodate the lower graphics card unless it is a single width card.
**Update**
I bought mine used, and paid the price for it. The used model has a broken port. I had to buy an additional sound card to plug in headphones. Buy new if you have the option, or if you plan to use the hdmi sound or an external sound card.
richard
20.12.2020
10/10
Оценка пользователя
Великолепно
Mobo needs update for at least the 2200g ryzen 3 cpu with graphics.
Good board. I can always use more fan headers this one has 2 if I remember right (not including cpu fan). Feature wise it has what I needed for a school computer build for family and wasn’t pricey.
The most important thing of note is if you are doing one of the CPU’s with built in graphics like 2200g this mobo needs a driver update in order to use the cpu. Which means if you don’t have another ryzen cpu you’re stuck sorta. I read that amd was sending repair/update kits to anyone that ran into the problem and had no other solution. And amd would send a cpu with graphics and cooler and instructions. Then after you pop in the cpu that works and update all the drivers they want you to send the cpu back.
The most important thing of note is if you are doing one of the CPU’s with built in graphics like 2200g this mobo needs a driver update in order to use the cpu. Which means if you don’t have another ryzen cpu you’re stuck sorta. I read that amd was sending repair/update kits to anyone that ran into the problem and had no other solution. And amd would send a cpu with graphics and cooler and instructions. Then after you pop in the cpu that works and update all the drivers they want you to send the cpu back.
Xeiyros
20.12.2020
8/10
Оценка пользователя
Хорошо
Patience and questionable usability
I noticed this motherboard was the cheapest on Amazon, so as per usual, people fling to that.
And honestly it works most of the time.
I will say however there are a very steep curve balls thrown with this board.
1. Out of the box it did not POST. And I do not know why, took several tries to get it booting, and when it did, it has a horrendous 15 second delay from pressing the power button to actually seeing the ASRock logo on the screen. Now i say "horrendous" but i only say this because most, if not..ALL motherboards tend to actually post relatively quickly, or do something. This motherboard legitimately sits there in the dark for a bit and then finally it'll boot. now this could be a defect with my unit as i've noticed that it has like a 1 in 3 chance to not boot from cold booting (which would be ram) but i can't tell to be honest. I've had 3 motherboards, and so far, this is by far the slowest one. Even my older asrocks from AM3 or FM2 didn't have this issue.
2. The UEFI BIOS on this board was outdated, and for some reason did not detect -any- M.2 SSDs, SATA or PCIe for me until the bios was updated.
3. This board has DDR4 3200Mhz support, however INTERESTINGLY enough it does not like 3200mhz ram, I hae Corsair 3200Mhz Samsung B die memory, that it did not like whatsoever however it did not mind Crucial Ballistix 2400Mhz memory, even with a hefty 600mhz OC to 3000 CL16.
4. Ryzen 3000 support is there out the box and my 3600 seems to work perfectly fine, in line with other benchmarks on the net, and XFR is available, though using that feature seems silly, and draws unnecessary amounts of extra power for little to no gain.
Under normal use, HWinfo shows my 3600 consuming easily 65w like its supposed to be doing between gaming and doing light streaming.
Video editing or stressing the chip brought power consumption to about 90w, which is still acceptable, especially with temps only hitting about 70c on the cores, 100c on the VRMs
5. This is a basic motherboard, it gets you from point A to point B. and does it as it should, the only bad thing i'd say is you have to do a little workaround to get any non windows OS systems to not lock up, and secondly the bios boot taking an absurdly long time is really the only issue i have.
Other than that I'd buy several of these motherboards so long as i can have it reliable for booting successfully as it doesn't seem like that is the case, though it is better with newer BIOS revisions so theres that.
And honestly it works most of the time.
I will say however there are a very steep curve balls thrown with this board.
1. Out of the box it did not POST. And I do not know why, took several tries to get it booting, and when it did, it has a horrendous 15 second delay from pressing the power button to actually seeing the ASRock logo on the screen. Now i say "horrendous" but i only say this because most, if not..ALL motherboards tend to actually post relatively quickly, or do something. This motherboard legitimately sits there in the dark for a bit and then finally it'll boot. now this could be a defect with my unit as i've noticed that it has like a 1 in 3 chance to not boot from cold booting (which would be ram) but i can't tell to be honest. I've had 3 motherboards, and so far, this is by far the slowest one. Even my older asrocks from AM3 or FM2 didn't have this issue.
2. The UEFI BIOS on this board was outdated, and for some reason did not detect -any- M.2 SSDs, SATA or PCIe for me until the bios was updated.
3. This board has DDR4 3200Mhz support, however INTERESTINGLY enough it does not like 3200mhz ram, I hae Corsair 3200Mhz Samsung B die memory, that it did not like whatsoever however it did not mind Crucial Ballistix 2400Mhz memory, even with a hefty 600mhz OC to 3000 CL16.
4. Ryzen 3000 support is there out the box and my 3600 seems to work perfectly fine, in line with other benchmarks on the net, and XFR is available, though using that feature seems silly, and draws unnecessary amounts of extra power for little to no gain.
Under normal use, HWinfo shows my 3600 consuming easily 65w like its supposed to be doing between gaming and doing light streaming.
Video editing or stressing the chip brought power consumption to about 90w, which is still acceptable, especially with temps only hitting about 70c on the cores, 100c on the VRMs
5. This is a basic motherboard, it gets you from point A to point B. and does it as it should, the only bad thing i'd say is you have to do a little workaround to get any non windows OS systems to not lock up, and secondly the bios boot taking an absurdly long time is really the only issue i have.
Other than that I'd buy several of these motherboards so long as i can have it reliable for booting successfully as it doesn't seem like that is the case, though it is better with newer BIOS revisions so theres that.
Bikelife570
20.12.2020
6/10
Оценка пользователя
Плохо
Disappointing in so many ways..
I bought this motherboard because I wanted to build a new budget gaming rig, and step into that sweet sweet RGB/ARGB arena as well. Well it handles the budget gamer end of things decently. Though now after experiencing what "budget gaming" means (compromise on top of compromise with a little more compromise) I cant say I recommend it to anyone. Also the second half of it, RGB lighting, has been nothing short of disastrous. I am using decent quality Cooler Master Sickleflow V2 ARGB 120mm fans in my MB511 ARGB case, so its not them. They work just fine with a separate controller from Cooler Master, but who wants to open their case every time they want to change the mood lighting? Not me.
I am now on my SECOND B450M-PRO4 mobo from ASRock and both of them have had the same issue. Their own software, Polychrome Sync/RGB, freezes every single time I try to open it and often actually gives me the BSOD!! So you would think okay, I can only control lighting from the BIOS then right? WRONG! The RGB tool in the BIOS DOES NOTHING AT ALL! Screw ASRock, I'm switching to ASUS (Yay Mystic Light!) and moving up to the X570 chipset, for when I ditch my EVGA 1650 Super for the RX 5700XT (which can make use of the new PCIe Gen4). All in all a bad experience. Im just happy Amazon has let me return them without issue. Thanks Amazon!
I am now on my SECOND B450M-PRO4 mobo from ASRock and both of them have had the same issue. Their own software, Polychrome Sync/RGB, freezes every single time I try to open it and often actually gives me the BSOD!! So you would think okay, I can only control lighting from the BIOS then right? WRONG! The RGB tool in the BIOS DOES NOTHING AT ALL! Screw ASRock, I'm switching to ASUS (Yay Mystic Light!) and moving up to the X570 chipset, for when I ditch my EVGA 1650 Super for the RX 5700XT (which can make use of the new PCIe Gen4). All in all a bad experience. Im just happy Amazon has let me return them without issue. Thanks Amazon!
Carlos Esteban Rivas
20.12.2020
10/10
Оценка пользователя
Великолепно
NO VIDEO, NO DISPLAY, CPU FAN SPINS
I’m an A+ Network + Certified tech. I’m using Rizen 3 1200, adata ssd 240gb, ddr4 2400mhz.
Problem:
I did connect everything and I got no video, cpu fan did spin, case fans were on normally, no motherboard beeps. I got really upset since obviously I know what I’m doing, and everything is new. I was about to return everything and just go to a local store I thought I did received Damage Rams, Damage cpu or Damage motherboard.
Solution:
The reason why I didn’t get any video was because I was trying just the internal motherboard video hdmi output, and ryzen 1200 doesn’t brkngs any video with it.
As a certified tech I never thought that the internal motherboard video did depend on the cpu as well.
Asrock tech support;
They are not busy at the line just call them mon-fri normal business hours they’ll answer.
Performance;
Is amazing, super fast, incredible fast because ryzen 3 1200 still a quad core cpu
Problem:
I did connect everything and I got no video, cpu fan did spin, case fans were on normally, no motherboard beeps. I got really upset since obviously I know what I’m doing, and everything is new. I was about to return everything and just go to a local store I thought I did received Damage Rams, Damage cpu or Damage motherboard.
Solution:
The reason why I didn’t get any video was because I was trying just the internal motherboard video hdmi output, and ryzen 1200 doesn’t brkngs any video with it.
As a certified tech I never thought that the internal motherboard video did depend on the cpu as well.
Asrock tech support;
They are not busy at the line just call them mon-fri normal business hours they’ll answer.
Performance;
Is amazing, super fast, incredible fast because ryzen 3 1200 still a quad core cpu
Shel
20.12.2020
10/10
Оценка пользователя
Великолепно
For me this is a solid board
I bought this board to replace an ASUS board that could not use Win10 in April 2020. There is nothing I don't like about this MOBO. For what I paid I have no complaints, and at the time I considered this an all around "budget/low end gaming" board. It had USB 3.1, 4 SATA 6gb sockets (a little lean, I would have preferred 6), and all the slots are PCIe, one Ultra M.2, and one regular SATA M.2 slot (which I won't be using). It came compatible with my Ryzen 5 3600X, so no having to flash the BIOS first. The BIOS settings were an easy affair, nothing earth shaking, but it has enough settings. This MATX board is nestled in a Dark Flash case and fits well. I have had no problems with the 16gb Corsair Vengeance 3200mhz, and is manually overclocked. I have not used the on-board GPU, so I can't say much about that. Another reason I chose this board was the placement of the PCIe slots. If I used a 2 slot wide GPU card it would not cover any of the other PCIe slots on the MOBO, I wanted a PCIe x1 slot to install a wireless NIC card. I will be upgrading to an NVMe M.2 for my boot drive/program/gaming, and relegating the SATA HDD I am using now to storage and work duties. I have not had any problems running Win10 or Linux on this MOBO. For what I do it works!
Spencer
20.12.2020
6/10
Оценка пользователя
Плохо
Major problems with first board
I just received this board today, I’ve built lots of computers so went through the normal build process with a new Ryzen 2600 and case, along with some known good components from a previous build.
After getting the initial components connected and installed, had some issues getting the board to power initially. It would power on for a second (fans would make like one rotation) and then it would shut off. I started disconnecting things one by one until I finally got the system to power on.
Upon the first actual boot up, the board made a pop sound and then smoke started coming out which freaked me out... as I’ve never seen this before. I thought it was the CPU but after quickly turning it off and examining everything, the CPU wasn’t damaged and it was the board.
I messed around with the board a little bit more and eventually was able to get it to boot into the BIOS but didn’t want to risk it damaging anything else so issued a return.
I’m giving a 3 star review for now because I think this was likely just a fluke. The board seems to be good quality and has great features for the price.
My only complaints, other than the board bursting into flames, are the following:
1) The SATA ports are directly under your GPU, so if you have a long GPU it’s really hard to connect/disconnect SATA devices.
2) The I/O board is kinda wonky.
Other than that, board seemed to be good build quality and really no other complaints. I’ll edit my review when I receive the replacement board.
After getting the initial components connected and installed, had some issues getting the board to power initially. It would power on for a second (fans would make like one rotation) and then it would shut off. I started disconnecting things one by one until I finally got the system to power on.
Upon the first actual boot up, the board made a pop sound and then smoke started coming out which freaked me out... as I’ve never seen this before. I thought it was the CPU but after quickly turning it off and examining everything, the CPU wasn’t damaged and it was the board.
I messed around with the board a little bit more and eventually was able to get it to boot into the BIOS but didn’t want to risk it damaging anything else so issued a return.
I’m giving a 3 star review for now because I think this was likely just a fluke. The board seems to be good quality and has great features for the price.
My only complaints, other than the board bursting into flames, are the following:
1) The SATA ports are directly under your GPU, so if you have a long GPU it’s really hard to connect/disconnect SATA devices.
2) The I/O board is kinda wonky.
Other than that, board seemed to be good build quality and really no other complaints. I’ll edit my review when I receive the replacement board.
Xial
20.12.2020
10/10
Оценка пользователя
Великолепно
Reliable ASRock, once again.
As usual, ASRock pulls through for me again. This board is Ryzen 3000 ready out of box, so I just had to put things together and power on my new machine.
This is my third board from ASRock in the last seven years, going from socket AM3+ to socket FM2+, and now to socket AM4. I've yet to need to RMA anything. It's all just worked.
This is my third board from ASRock in the last seven years, going from socket AM3+ to socket FM2+, and now to socket AM4. I've yet to need to RMA anything. It's all just worked.
Wolf
20.12.2020
2/10
Оценка пользователя
Ужасно
Motherboard slowing disintegrated over time
i had problems with corruption on my M.2 NVME drive a couple of times over the last year thinking it's the m.2 ssd, however, then my SATA connections stopped working first SATA 1, 2 ... and now SATA 3 and 4 stopped working as well. I started to lose SATA drives always after rebooting and even the bios wouldn't see the drive anymore. I just spent a day reinstalling Windows 10 and all software on a brand new Samsung SSD. Just as i rebooted after the last software install the SATA drive disappeared and the system doesn't boot anymore.
Paxton Freeman
20.12.2020
8/10
Оценка пользователя
Хорошо
1st board came DOA, 2nd board is fine
I ordered this board for a pc build that I did. I am a first time PC builder. This board is an micro ATX board that seems sufficient for a budget build. The first time I got this board set up, I remember I heard a electric cracking noise that I am still unsure of where it came from. I didn't have the board powered on or anything. i was just plugging in cables. It turns out that board was dead, and I got a constant power cycle on it know matter what I did. I ended up sending it back for RMA.
The second board seems to be working fine. I am able to get into the BIOS and everything seems to be working as intended. It has 3 ports for fans, and all of the ports for case wires are on the bottom of the board. I don't like th orientation of the case power LEDs as they switch from being horizontal to vertical as you are going from left to right, which it took me too long to figure out.
So far I am happy with it and will provide additional updates as I experience more with it.
The second board seems to be working fine. I am able to get into the BIOS and everything seems to be working as intended. It has 3 ports for fans, and all of the ports for case wires are on the bottom of the board. I don't like th orientation of the case power LEDs as they switch from being horizontal to vertical as you are going from left to right, which it took me too long to figure out.
So far I am happy with it and will provide additional updates as I experience more with it.
Frank Turner
20.12.2020
10/10
Оценка пользователя
Великолепно
Best bang for buck
Just built with this...AMD 3 series 2200g with on board graphics. I/O ports work as intended.
Can't beat the value of this board. B450 will be upgradable to 8 core down the road if/when the price drops due to 3 series Ryzen being released and I decide to get a dedicated graphics card. Honestly because I am old and don't game but do photo editing and the computer pretty much in its entirety for everything, this combo with 2200g and 16g of 3200 Ram rocks like the As-rock name. Asrock is the real deal. I took a bit of chance on them back in 2012 and my Asrock 970 Extreme4 now with latest BIOS is still operating perfectly with Phenom II CPU and GTX 1050.
Asrock for the win. Great and intuitive BIOS. B450 will have you covered for upgrading unless you go crazy and need more power to drive 12 cores. This board will handle 8 cores with overclocking.
It is also a handsome board. Not gimmicky or blingy but has RGB headers for those inclined. I run it in a Fractal Define C min TG case. Lovely combo and easy build.
Can't beat the value of this board. B450 will be upgradable to 8 core down the road if/when the price drops due to 3 series Ryzen being released and I decide to get a dedicated graphics card. Honestly because I am old and don't game but do photo editing and the computer pretty much in its entirety for everything, this combo with 2200g and 16g of 3200 Ram rocks like the As-rock name. Asrock is the real deal. I took a bit of chance on them back in 2012 and my Asrock 970 Extreme4 now with latest BIOS is still operating perfectly with Phenom II CPU and GTX 1050.
Asrock for the win. Great and intuitive BIOS. B450 will have you covered for upgrading unless you go crazy and need more power to drive 12 cores. This board will handle 8 cores with overclocking.
It is also a handsome board. Not gimmicky or blingy but has RGB headers for those inclined. I run it in a Fractal Define C min TG case. Lovely combo and easy build.
Johnson
20.12.2020
10/10
Оценка пользователя
Великолепно
Good value with a M.2 slot
Affordable motherboard with just enough features for what I wanted. I was wanting make a budget build for a basic office computer with minimal cabling and this fit the bill.
I stuck a 128Gb M.2 SATA SSD, 2x 4GB of cheap 2400Mhz RAM, and the Athlon 200GE.
Everything came together without any problems at all. I hope this lasts 10 years like the board that it replaced!
I stuck a 128Gb M.2 SATA SSD, 2x 4GB of cheap 2400Mhz RAM, and the Athlon 200GE.
Everything came together without any problems at all. I hope this lasts 10 years like the board that it replaced!
Yotoo
20.12.2020
10/10
Оценка пользователя
Великолепно
nice mdb so far
I just build a gaming PC, the 1st in years this board came out of the box supporting Ryzen 3000 CPU series, didn't have to mess with the Bios except to load XMP profile for the memory.
Besides the CPU fan connector you can plug 4 more fan to this board
this is my system: (as reference)
RAM: 16 GB DDR4 3000Mhz from XPG Z1
CPU: Ryzen 5 2600 3.4Ghz
GPU: Nvidia GTX 1650 Super from Zotac
PSU: Corsair CV 550W 80+Bronze (non modular)
SSD: 500GB WD 3D
Case: CoolMaster MCB-Q500L
Im happy so far how it running and gaming experience is smooth.
Besides the CPU fan connector you can plug 4 more fan to this board
this is my system: (as reference)
RAM: 16 GB DDR4 3000Mhz from XPG Z1
CPU: Ryzen 5 2600 3.4Ghz
GPU: Nvidia GTX 1650 Super from Zotac
PSU: Corsair CV 550W 80+Bronze (non modular)
SSD: 500GB WD 3D
Case: CoolMaster MCB-Q500L
Im happy so far how it running and gaming experience is smooth.
kathy
20.12.2020
2/10
Оценка пользователя
Ужасно
run away!
nothing but lies! Bios states p3.30, won't display screen with fresh win ten install. sandisk 1000gig ssd new confirmed 1000 watt 80 plus psu new confirmed, barebones fire up fail. can't even install vga drive without display. Just a bad company asrock. They emailed me a refusal for rma and tech support. Put it off on vendor. They blow, so does this board!
never again, just run away
never again, just run away
J. C. Danko
20.12.2020
8/10
Оценка пользователя
Хорошо
Seems great but can't boot from NVME drive.
This is my second MB with a new build MATX PC. The first, a Gigabyte MB, had a weird problem where it would not restart after a shutdown. Returned that for this ASROCK B450M pro 4. It look really good testing out of the case. The one test I forgot was to see if it would boot from the M2._1 port with a M.2 NVME drive. Manual says it is supported but it WILL NOT BOOT. Installing Windows 10 the installer even says so. The MB is at the latest BIOS level so I guess that's the way it is. I am waiting to see what Asrock Tech Supt has to say.
Joe Bowers
20.12.2020
8/10
Оценка пользователя
Хорошо
Great value and performance
I've built at least a dozen systems using this board and have had no problems with them. The performance is very good, they're stable and easy to work with. The BIOS is easy to update and they load the XMP profiles from RAM without issue. Basically this is an excellent board for the price. Unless you need specific features like SLI, this is a great choice.
Показаны отзывы 217-240 из 393.
