Отзывы о Материнская плата ASRock H510M-HVS R2.0
393 отзывов пользователей o ASRock H510M-HVS R2.0
Пользовались
ASRock H510M-HVS R2.0?
Поделитесь своим опытом и помогите другим сделать правильный выбор
Jorge Mendez
20.12.2020
8/10
Оценка пользователя
Хорошо
Nice Mother Board
Asrock B450M Pro4 is a really nice mother board it performs almost as I expected.
It has cooled VRM, two M.2 slots, only 1 is Ultra M.2 (MVNe), lots of connectivity (USB, USB 3.0, USB3.1 USB type C, HDMI, DVI, VGA)
A good thing about this MOBO is that it comes Ryzen 3000 Ready.
There are 2 things I wish I knew before I bought it:
1.- I think the BIOS-UEFI does not have all features I have seen in other MOBOS.
2.- The RGB control on this bord is not what I was expecting it is very wonky.
It has cooled VRM, two M.2 slots, only 1 is Ultra M.2 (MVNe), lots of connectivity (USB, USB 3.0, USB3.1 USB type C, HDMI, DVI, VGA)
A good thing about this MOBO is that it comes Ryzen 3000 Ready.
There are 2 things I wish I knew before I bought it:
1.- I think the BIOS-UEFI does not have all features I have seen in other MOBOS.
2.- The RGB control on this bord is not what I was expecting it is very wonky.
Adam
20.12.2020
8/10
Оценка пользователя
Хорошо
Can't get the top M.2 port to boot my OS
overall I think this board has a lot for being a micro atx. 2x m.2 ports. 2x pci 16x. 4 slots for ram. it is really nice for the form factor and what you get. the issue i ran into was that I had my nvme drive in the top m.2 drive slot and couldnt get the computer to boot into my OS until i moved the drive to the lower slot. I will have to see if it is a dead m.2 slot or just needs to be configured in bios. I have never had an issue like that before so i was surprised.
Amazon Customer
20.12.2020
8/10
Оценка пользователя
Хорошо
Can Handle Mild Overclocks, Dont Push Harder Overclocks On 2nd Gen Ryzen 5/7 X Variant CPUs
Used for a three months now. Have paired with a 2600x and 16gb delta rgb 3000mhz cl16 ram. It's good for what you get on a budget.
Pros:
Enough SATA ports for up to 4 HDDs/SSDs for starters.
2 M.2 Slots (1 NVMe x 1 Sata 3)
Enough space for GPU and Pcie Wifi
Can do mild overclocking (have 2600x at 4ghz with 1.2375v and -100mv vcore offset, never BSOD'd once)
Cons:
3+3 phase VRMs
Don't hard overclock, especially with 2nd/3rd gen Ryzen 5/7 x variants (stated above)
If you have a SATA M.2 installed on the SATA III M.2 slot, you lose a SATA port.
If you have a 2600x on this board. Don't use PBO (Precision Boost Overdrive), stick with a mild overclock of something like 4ghz at 1.2375v with a vcore offset of -100mv. Or stock settings.
Mine runs stable and never exceeds 1.14v. Have touched the VRMs multiple times whilst in stress tests for an hour, they never got hot and you still get the respected performance whilst not cooking VRMs.
If you want a better motherboard for hard overclocks, try and find a used b450 Tomahawk for under $80 through Amazon Warehouse. You'll have a better time and will get the most performance out of the 2600x on a Tomahawk. If you don't plan on overclocking, then this motherboard is fine at stock, you can still undervolt the cpu if need be. My Gammaxx 400 (extra fan attached) keeps my 2600x at around 35c max in ambient of 14c with current OC settings.
Pros:
Enough SATA ports for up to 4 HDDs/SSDs for starters.
2 M.2 Slots (1 NVMe x 1 Sata 3)
Enough space for GPU and Pcie Wifi
Can do mild overclocking (have 2600x at 4ghz with 1.2375v and -100mv vcore offset, never BSOD'd once)
Cons:
3+3 phase VRMs
Don't hard overclock, especially with 2nd/3rd gen Ryzen 5/7 x variants (stated above)
If you have a SATA M.2 installed on the SATA III M.2 slot, you lose a SATA port.
If you have a 2600x on this board. Don't use PBO (Precision Boost Overdrive), stick with a mild overclock of something like 4ghz at 1.2375v with a vcore offset of -100mv. Or stock settings.
Mine runs stable and never exceeds 1.14v. Have touched the VRMs multiple times whilst in stress tests for an hour, they never got hot and you still get the respected performance whilst not cooking VRMs.
If you want a better motherboard for hard overclocks, try and find a used b450 Tomahawk for under $80 through Amazon Warehouse. You'll have a better time and will get the most performance out of the 2600x on a Tomahawk. If you don't plan on overclocking, then this motherboard is fine at stock, you can still undervolt the cpu if need be. My Gammaxx 400 (extra fan attached) keeps my 2600x at around 35c max in ambient of 14c with current OC settings.
Andrew M
20.12.2020
10/10
Оценка пользователя
Великолепно
Just works,out of the box, with Ryzen 3 2200G
Using this with a Ryzen 3 2200G and 2x8GB ADATA XPG DDR4-3000. Everything worked out of the box.
Pay attention to where the motherboard tells you to install the RAM modules for best performance - initially I just bunged them into the 2 slots closest to the CPU, and was only able to get them to run at DDR4-2133 with no XMP option available. Then I re-read the manual, and noted that it is explicit about installing dual-channel memory into the 2nd and 4th slots (where the 1st slot is the one closest to the CPU). I moved them, fired it up again, selected the XMP profile in the BIOS, and bingo! DDR4-3000 operating perfectly.
I am a fan of ASRock motherboards for AMD systems, so I am slightly biased - I have used them before, and currently have ASRock B450 boards in both my Ryzen systems, and so far I have had no issues and have been very happy with them.
Pay attention to where the motherboard tells you to install the RAM modules for best performance - initially I just bunged them into the 2 slots closest to the CPU, and was only able to get them to run at DDR4-2133 with no XMP option available. Then I re-read the manual, and noted that it is explicit about installing dual-channel memory into the 2nd and 4th slots (where the 1st slot is the one closest to the CPU). I moved them, fired it up again, selected the XMP profile in the BIOS, and bingo! DDR4-3000 operating perfectly.
I am a fan of ASRock motherboards for AMD systems, so I am slightly biased - I have used them before, and currently have ASRock B450 boards in both my Ryzen systems, and so far I have had no issues and have been very happy with them.
Amazon Customer
20.12.2020
10/10
Оценка пользователя
Великолепно
Out of the box Ryzen 3000 compatibility
Something that's important to note is this motherboard worked out of the box with my R7 3800X, no bios update required. It even has the "Works with Ryzen 3000" sticker on the box. Not sure why they're not advertising this anywhere online, perhaps because not all the shipped units have the new BIOS?
Either way, works perfectly as a replacement for my DOA MSI B450M GAMING PLUS (which did require a bios update, then failed to post).
Either way, works perfectly as a replacement for my DOA MSI B450M GAMING PLUS (which did require a bios update, then failed to post).
Quinton Shipps
20.12.2020
8/10
Оценка пользователя
Хорошо
Solid little board
Great feature set for such a small form factor board. I like how far the PCIE ports are from one another, as it allows ample room between my WiFi card and my GPU. Having an M.2 port is nice for future proofing, even though I don’t personally use it, and I think it’s in a pretty good location.
I did have some issues fitting my RAM in after installing a stock AMD cooler (Patriot Viper). Although it wasn’t too big of an issue, if you have exceptionally y’all RAM, you may need to install it before installing a lower profile cooler.
The UEFI BIOS feels snappy and is really easy to navigate.
Overall, it feels like a solid board and is laid out great!
I did have some issues fitting my RAM in after installing a stock AMD cooler (Patriot Viper). Although it wasn’t too big of an issue, if you have exceptionally y’all RAM, you may need to install it before installing a lower profile cooler.
The UEFI BIOS feels snappy and is really easy to navigate.
Overall, it feels like a solid board and is laid out great!
dr.stone
20.12.2020
10/10
Оценка пользователя
Великолепно
Great all around board for the budget.
Great board. Multiple fan headers and RGB headers. Built a $500 gaming rig around this and the Ryzen 1600 AF. Fired right up and had the latest BIOS installed. Tried two different sets of memory in it just to see how it would work. Both worked fine with XMP settings enabled. Team 3200 DDR4 and Corsair 3600 DDR4. Both sets were two X eight. Honestly, for $79, great board.
Ray Kirk
20.12.2020
4/10
Оценка пользователя
Ужасно
Product is good, but the shipping...
This isn't the first time I've used this board model which normally performs excellent for the price, but this was my first time going through Amazon for it. This review is mainly towards Amazon themselves. It was shipped in just its box, label on top, and not even sealed. Missing the IO shield, manual, and extra sata cables. Those aren't a big deal, but the packing was. It was just the manufacturer packing inside, and thats it. Testing for functionality here shortly, but so far, not pleased with the poor quality of care from whoever "packed" my order.
S. R. Orth
20.12.2020
2/10
Оценка пользователя
Ужасно
Promo junk
Ordered Ryzen 3 with new case,power supply, Rip Jaw Dram 16 GB DDR4 3200. Would not load Win 7. Ordered & loaded W10 Pro. Kept getting the Blue screen of death. Very frustrating. Ram memory checked OK. Got various error codes. After hours & hours of trying to resolve I decided to replace the MOBO with a Asus ROG Strix B450-F Gaming Motherboard (ATX). This board resolved all issues and ROCKS. Ordered SSD 500 MB to house the OS. Have 1T HHD & 4T HHD. The SSD boots in 3 seconds. Love the new system. I will only purchase gaming MOBOs going forward. Has 6 Sata ports and 2 M.2 ports. No more Asrock for me. Ever.
s olson
20.12.2020
6/10
Оценка пользователя
Плохо
Had to do a CMOS reset after clocking the RAM to 3200mhz
I knew being a cheaper mobo there would be limitations. Only 2 RAM slots, no integrated WiFi or Bluetooth, etc. What I was surprised about was that I couldn’t clock my RAM any higher than 2933. I should’ve done more research, but be warned that the system will not boot if you try and clock your RAM higher than that. We ended up doing a CMOS reset to clear the BIOS, which was a headache in the small case we were working in. If I had to do it again, I would’ve spent more for a nicer board.
Rob0
20.12.2020
2/10
Оценка пользователя
Ужасно
Stay away
I have never had so many issues with a motherboard before in my life. Constantly BSOD and crashes - I have gotten every error code there is. I have always used gigabyte/Aorus motherboards and I figured I’ll give ASrock a try. Biggest mistake ever. Do yourself a favor and buy another brand. ASrock has lost me for any further purchases of this brand. Another issue - I thought I was crazy when I couldnt get the m.2 slot to work. Found out other people have has this same problem. This board is total crap.
I have spent hours trying to this motherboard to work right. I eventually just bought another board from gigabyte and all my problems went away. Shocker.
I have spent hours trying to this motherboard to work right. I eventually just bought another board from gigabyte and all my problems went away. Shocker.
Joseph Ciszewski
20.12.2020
8/10
Оценка пользователя
Хорошо
Overall Happy With Purchase but.......
I have used budget minded ASROCK motherboards in the past and they are my go to when looking to upgrade. The board shipped Ryzen 3000 series compatible with BIOS 3.6. I am currently using it with a 3900x and 2x8gb G.Skill Ripjaws 3600mhz cl16. Make sure to look for BIOS updates on the ASROCK website. I just updated to 3.9 which added new features and solved an issue I was having with my ability to enter BIOS when it posted before booting into Windows. (I had to use ASROCK's boot to uefi software while in Windows to get around this until I updated). Also make sure to use memory slots A2 and B2 when using fast ram.
In my experience at least with this motherboard/parts combo, Out Of The Box the way the 3900x uses voltage (1.45v) when boosting and in turn the way WRAITH PRISM cooler responds is a bit obnoxious, like the fans on a graphics card having driver issues spontaneously ramping up and down. Of course all this behavior can be tuned in BIOS to your liking, but just thought I should mention it.
So a couple of road bumps along the way, but I'd still recommend it.
In my experience at least with this motherboard/parts combo, Out Of The Box the way the 3900x uses voltage (1.45v) when boosting and in turn the way WRAITH PRISM cooler responds is a bit obnoxious, like the fans on a graphics card having driver issues spontaneously ramping up and down. Of course all this behavior can be tuned in BIOS to your liking, but just thought I should mention it.
So a couple of road bumps along the way, but I'd still recommend it.
J-Dog
20.12.2020
2/10
Оценка пользователя
Ужасно
Dead on arrival
Thank you ASRock for wasting my time. This motherboard arrived dead on arrival. But I had to blow a couple of hours troubleshooting it to rule out other problems, such as incorrectly installed RAM or other potential problems. This motherboard has no LEDs on the board to indicate any kind of success/failure codes when it's booting, making triage more difficult. On the plus side, the ASRock technical support was fairly responsive to my questions during the troubleshooting process. They were willing to do an RMA on the board, but I chose to simply return it to Amazon instead.
Kindle Customer
20.12.2020
8/10
Оценка пользователя
Хорошо
Excellent
I have not built a pc in a few years, after many reviews I picked up this motherboard, I am very happy with it, as it suits my general purpose needs, I jumped on the AMD Ryzen 5 2400G band wagon, was a small issue with unparking the cores, but an update fixed than. Uninstalled the Ryzen master software and went into the msconfig, advance and unchecked the cores, reboot and went back into msconfig and I had all the cores and threads showing. Only down side is the rear IO panel, hard to read because it is embossed into the metal.
E. T.
20.12.2020
10/10
Оценка пользователя
Великолепно
Bios 2.2 will boot Ryzen 5 3400G
Was very happy to see the older bios (as of 7/19) would boot a Ryzen 3400G without needing a flash update.
Wish there was a wifi m2 slot, but can make do without.
Wish there was a wifi m2 slot, but can make do without.
icepunch
20.12.2020
10/10
Оценка пользователя
Великолепно
An amazing MB for the price.
Works perfectly out the box with Ryzen and it has everything you can ask for. The size of this thing is amazing and even more amazing for all the slots, AIOs, it has. It doesn't have all the bells and whistles like a full MB does but its very close. Everything from M.2 slots, PCI-E, 4 RAM slots and other features that I can't remember. The thing is so efficient and I have to admit this is my first MATX build and I am very impressed with everything on this thing. The quality, the price, the no fuzz, absolutely a pleasure to work with.
theking8713
20.12.2020
10/10
Оценка пользователя
Великолепно
Great price and great quality
Built very well and it is perfect for my ryzen 5 2400g(not recommended for the ryzen 5 non apu as there is only a 4pin cpu power header) but this is perfect for my low tdp 4/8core APU and other than high core count compatibility there is nothing else to mention on the con side of this board it is more than sufficient at this form factor and has all the features expected of a b450 chipset at a very competitive price... I bought this to replace a a320m chipset mobo that was actually more expensive but less compatible that is housing a measly dual core athlon200ge now as it could not power my wiping 65watt ryzen 5 lol...update now that ryzen 3000 cpu are low cost and high performance I dont even recomend using the apus anymore u can use any cheap a320 board for those and be just fine this board is perfect for a budget high performance system with any core up to 65watts(can Handel i think 95watts but I'm not comfortable making that recommendation with only 4pin cpu power) but the ryzen 5 3600 6core at 4.2ghz is perfect and you still can use dual chanel memory i have recently upgraded the clients rig with this board in it to the 3600 and upped it to 16gb of 3600mhz ddr4 and he us super happy with the performance and price
Mad Cow
20.12.2020
10/10
Оценка пользователя
Великолепно
One of the better motherboards for Ryzen I have used; plenty of headers for lights and accessories.
I have this board for two builds. The price is right and offers features on more expensive boards. It has two 12 volt RGB and a 5v RGB header, heat sinks on the VRAM, 4 DIM slots, two M.2 slots (one can be used for NVMe), easy BIOS, works out of the box for every Ryzen 1st gen I have tried. I have another ASROCK board around the same price point and it has no RGB headers, no heat sinks over the VRAM and just two DIM slots and one M.2 slot. It has more features than an MSI board I had used for another Ryzen build that was nearly double the price. One is outfitted with a Ryzen 5 1600X with 32GB of G-Skill Flare X, an M.2 SSD, 2TB HDD and NVIDIA 1060 6GB, the other is a Ryzen 7 1700, 32GB of G-Skill FlareX, Patriot M.2 SSD, Western Digital M.2 SSD, SATA3 SSD, 4TB HDD, RX580 8GB.
If you're building a Ryzen 1st or 2nd gen machine, I would definitely recommend this board due to the features it offers at the price point. Neither have failed me yet.
05/12/20 Update: Now I have one rocking a Ryzen 5 3600X with a BIOS update to 3.50. No issues.
05/20 to 10/20 Update: Transplanted the motherboard into an HTPC case so I can fit into a smaller space in my entertainment system and game on my 65" TV. So upgraded to a GTX 1660 6GB card (because of small form factor) and 32GB (4X8GB) or G.Skill Trident RGB RAM DDR4 2400 overclocked to 3200 that I had sitting around. Everything worked fine and all games were buttery smooth.
Being the eternal tinkerer, I can't leave well enough alone so I decided to max out the RAM at 64GB with some G.Skill Aegis (4X16GB) DDR4 3200 I had laying around for a different build (workstation), I needed to test the RAM and make sure it worked and to run Memtest before the return window closed. I pulled the 4 sticks of overclocked G.Skill Trident RGB out, and tossed 4 sticks of the G.Skill Aegis RAM in....wouldn't boot up :(
This is a common issue I have run into when building rigs, my usual solution when building a new rig or introducing new RAM if it doesn't boot with all RAM installed is to start off with 1 stick in the primary RAM slot, which worked in this case. I let it boot into BIOS, verify the RAM, then shut it down. For testing purposes, I did this with the remaining sticks of RAM, had to make sure they all worked. Then I installed two sticks of RAM, booted into BIOS, shut it down. Tossed in the next two sticks of RAM, booted into BIOS, set XMP, reboot into windows and wham, I'm in.
Because I can't leave well enough alone, I went back into BIOS and tried overclocking the RAM....NOPE - would not overclock showing the limitations of cheap G.Skill Aegis RAM versus the much more expensive G.Skill Trident RGB sticks which can be cranked up. Still have the 64GB of RAM installed (definitely overkill), works great so I guess I'll keep them in since the workstation is getting different RAM anyway. So far so good, great MoBo, all the addressable RGB still works great (Wraith Spire LED, Corsair RGB Fans, LED strips), will probably buy another board for another build to use up spare parts I have laying around, like the G.Skill Trident RGB sticks I just pulled out. It has kinda raised in price a little bit though (thanks to Linus Tech Tips), so I have looked at other MoBo's in the same price range, they just don't have the feature set so looks like I'll pick up #3.
Update 11/24/20
I like this board so much that I bought another one. Now I have covered 1st, 2nd and 3rd gen Ryzen on it. By the way, this latest one had the sticker that it was 3rd Gen Ryzen ready, but I stuck a 2700X in this one. I added a few pics, Darkflash Mesh case, Neon lights really make it pop, why not, it has two 12v RGB headers and a 5v RGB header. This build was to mop up parts I had laying around.
If you're building a Ryzen 1st or 2nd gen machine, I would definitely recommend this board due to the features it offers at the price point. Neither have failed me yet.
05/12/20 Update: Now I have one rocking a Ryzen 5 3600X with a BIOS update to 3.50. No issues.
05/20 to 10/20 Update: Transplanted the motherboard into an HTPC case so I can fit into a smaller space in my entertainment system and game on my 65" TV. So upgraded to a GTX 1660 6GB card (because of small form factor) and 32GB (4X8GB) or G.Skill Trident RGB RAM DDR4 2400 overclocked to 3200 that I had sitting around. Everything worked fine and all games were buttery smooth.
Being the eternal tinkerer, I can't leave well enough alone so I decided to max out the RAM at 64GB with some G.Skill Aegis (4X16GB) DDR4 3200 I had laying around for a different build (workstation), I needed to test the RAM and make sure it worked and to run Memtest before the return window closed. I pulled the 4 sticks of overclocked G.Skill Trident RGB out, and tossed 4 sticks of the G.Skill Aegis RAM in....wouldn't boot up :(
This is a common issue I have run into when building rigs, my usual solution when building a new rig or introducing new RAM if it doesn't boot with all RAM installed is to start off with 1 stick in the primary RAM slot, which worked in this case. I let it boot into BIOS, verify the RAM, then shut it down. For testing purposes, I did this with the remaining sticks of RAM, had to make sure they all worked. Then I installed two sticks of RAM, booted into BIOS, shut it down. Tossed in the next two sticks of RAM, booted into BIOS, set XMP, reboot into windows and wham, I'm in.
Because I can't leave well enough alone, I went back into BIOS and tried overclocking the RAM....NOPE - would not overclock showing the limitations of cheap G.Skill Aegis RAM versus the much more expensive G.Skill Trident RGB sticks which can be cranked up. Still have the 64GB of RAM installed (definitely overkill), works great so I guess I'll keep them in since the workstation is getting different RAM anyway. So far so good, great MoBo, all the addressable RGB still works great (Wraith Spire LED, Corsair RGB Fans, LED strips), will probably buy another board for another build to use up spare parts I have laying around, like the G.Skill Trident RGB sticks I just pulled out. It has kinda raised in price a little bit though (thanks to Linus Tech Tips), so I have looked at other MoBo's in the same price range, they just don't have the feature set so looks like I'll pick up #3.
Update 11/24/20
I like this board so much that I bought another one. Now I have covered 1st, 2nd and 3rd gen Ryzen on it. By the way, this latest one had the sticker that it was 3rd Gen Ryzen ready, but I stuck a 2700X in this one. I added a few pics, Darkflash Mesh case, Neon lights really make it pop, why not, it has two 12v RGB headers and a 5v RGB header. This build was to mop up parts I had laying around.
Roman
20.12.2020
10/10
Оценка пользователя
Великолепно
Best Budget Motherboard for AMD 7 3700X
Here are my specs and cost:
AMD 7 3700X $299
ASRock B450 M-HDV R4.0 $65
PNY GeForce RTX 2060 Super $390
Timetech Hynix 16GB DDR 3200mhz $60
Sbrent 512GB M.2 2280 SSD $80
EVGA 750w $59
darkFlash mid-tower $95
Windows 10 Pro x64 $100
Total after tax is about $1300. That's a great bargain.
I researched hard through Google, YouTube, and other reviewers on any B450 motherboard to find a solution for getting my ram clocked at 3200mhz and hardly anyone gave a resolution. I did finally found one by following this tutorial on YouTube by searching "How to Manually Tune Your DDR4 Memory For Ryzen." Basically I use two softwares in order to figure how to clock my ram correctly, since I am not an expert, which are Thaiphoon Burner and Dram Calculator for Ryzen.
This worked for me, so I hope that helps you if you are encountering the same problem too. If I have help you in anyway, please click the "Helpful" button. Thank you!
AMD 7 3700X $299
ASRock B450 M-HDV R4.0 $65
PNY GeForce RTX 2060 Super $390
Timetech Hynix 16GB DDR 3200mhz $60
Sbrent 512GB M.2 2280 SSD $80
EVGA 750w $59
darkFlash mid-tower $95
Windows 10 Pro x64 $100
Total after tax is about $1300. That's a great bargain.
I researched hard through Google, YouTube, and other reviewers on any B450 motherboard to find a solution for getting my ram clocked at 3200mhz and hardly anyone gave a resolution. I did finally found one by following this tutorial on YouTube by searching "How to Manually Tune Your DDR4 Memory For Ryzen." Basically I use two softwares in order to figure how to clock my ram correctly, since I am not an expert, which are Thaiphoon Burner and Dram Calculator for Ryzen.
This worked for me, so I hope that helps you if you are encountering the same problem too. If I have help you in anyway, please click the "Helpful" button. Thank you!
Charles Hays
20.12.2020
8/10
Оценка пользователя
Хорошо
Good Entry Board but Lacking some QOL features
Like the form factor, and it worked great right out of the box. Good price for an entry level mobo.
That being said, it lacks a few things my MSI matx gaming board had. I got the MSI board on sale around Christmas for $50. Unfortunately my MSI board is currently on an RMA so I bought this one while I wait.
Things that are lacking that I like about my MSI mobo:
RGB lighting headers, better OC application, USB-C connection. Fan channels are adjustable via app or auto temp profile.
The most annoying thing to me about this Asrock mobo is the 2nd fan channel is a 3 pin which means you can't adjust fan speed. If you like your case fans running at max sounding like a jet engine all the time then no worries, for me I chose to run a 4 way splitter from fan 1 so I could create a cooling profile. This is really my biggest gripe about the board so far, otherwise it's a fine and stable board for a 2700x OC'd to 4.2.
That being said, it lacks a few things my MSI matx gaming board had. I got the MSI board on sale around Christmas for $50. Unfortunately my MSI board is currently on an RMA so I bought this one while I wait.
Things that are lacking that I like about my MSI mobo:
RGB lighting headers, better OC application, USB-C connection. Fan channels are adjustable via app or auto temp profile.
The most annoying thing to me about this Asrock mobo is the 2nd fan channel is a 3 pin which means you can't adjust fan speed. If you like your case fans running at max sounding like a jet engine all the time then no worries, for me I chose to run a 4 way splitter from fan 1 so I could create a cooling profile. This is really my biggest gripe about the board so far, otherwise it's a fine and stable board for a 2700x OC'd to 4.2.
JT
20.12.2020
8/10
Оценка пользователя
Хорошо
Good Budget Board
Bought this board for a budget $500 build. It's been amazing and I regret nothing, especially for it's low price point. But, with all the new processors coming out this buy is starting to run the course. I started with a Ryzen 5 2600 and have been trading up since.
I got this board because it wasn't fancy. No RGB, no weirdly placed heat sinks to give the illusion they're actually cooling something. All board, I do wish I would have gotten a board with integrated WIFI. As I did initially have to buy an additional WIFI adapter. Keep that in mind as that is $15 which could put you closer towards a Fatal1ty B450 with included WIFI.
Here are it's very basic features:
AMD AM4
Supports DDR4 3200+ (Overclockable)
1 PCIe 3.0 x16, 1 PCIe 2.0 x16, 1 PCIe 2.0 x1
AMD Quad CrossFireX
Graphics Output: HDMI, DVI-D, D-Sub
7.1 CH HD Audio (Realtek ALC892 Codec)
ELNA Audio Caps
4 SATA3, 1 Ultra M.2 (PCIe Gen3 x4), 1 M.2 (SATA3)
2 USB 3.1 Gen2 (Rear Type-A+C), 6 USB 3.1 Gen1 (2 Front, 4 Rear)
Realtek Gigabit LAN
Although there are plenty of people who have, I've had no issues with any of my upgrade components posting right out of the box. At first, I did cross-reference the support list frequently to make sure I'd have no issues. When I started noticing it that pretty much anything you stick in or onto this MBD, the B450 will take it (at least for me) and will at least allow it to post to the point you can update the BIOS after installing.
To no surprise, the last BIOS update (P4.20) did support Ryzen 9 3900XT. And speaking of BIOS options, don't expect anything fancy here. It is simple and straightforward. Being that it is washed of many options it does however navigate extremely easy. Something beginners, novices and professionals will appreciate. But, obviously that does leave some options at the wayside. Keep in mind this is a budget board and that is to be expected.
If you're looking for a great sub $75 do it all board, I highly recommend the ASRock B450M Pro4. You won't go wrong!
I got this board because it wasn't fancy. No RGB, no weirdly placed heat sinks to give the illusion they're actually cooling something. All board, I do wish I would have gotten a board with integrated WIFI. As I did initially have to buy an additional WIFI adapter. Keep that in mind as that is $15 which could put you closer towards a Fatal1ty B450 with included WIFI.
Here are it's very basic features:
AMD AM4
Supports DDR4 3200+ (Overclockable)
1 PCIe 3.0 x16, 1 PCIe 2.0 x16, 1 PCIe 2.0 x1
AMD Quad CrossFireX
Graphics Output: HDMI, DVI-D, D-Sub
7.1 CH HD Audio (Realtek ALC892 Codec)
ELNA Audio Caps
4 SATA3, 1 Ultra M.2 (PCIe Gen3 x4), 1 M.2 (SATA3)
2 USB 3.1 Gen2 (Rear Type-A+C), 6 USB 3.1 Gen1 (2 Front, 4 Rear)
Realtek Gigabit LAN
Although there are plenty of people who have, I've had no issues with any of my upgrade components posting right out of the box. At first, I did cross-reference the support list frequently to make sure I'd have no issues. When I started noticing it that pretty much anything you stick in or onto this MBD, the B450 will take it (at least for me) and will at least allow it to post to the point you can update the BIOS after installing.
To no surprise, the last BIOS update (P4.20) did support Ryzen 9 3900XT. And speaking of BIOS options, don't expect anything fancy here. It is simple and straightforward. Being that it is washed of many options it does however navigate extremely easy. Something beginners, novices and professionals will appreciate. But, obviously that does leave some options at the wayside. Keep in mind this is a budget board and that is to be expected.
If you're looking for a great sub $75 do it all board, I highly recommend the ASRock B450M Pro4. You won't go wrong!
Amazon Customer
20.12.2020
10/10
Оценка пользователя
Великолепно
Works as expected
Worked as expected, good for the price
Just consider if only 1 pci express 16 and 2 ram slots are good for your needs
Just consider if only 1 pci express 16 and 2 ram slots are good for your needs
MrBohannon
20.12.2020
10/10
Оценка пользователя
Великолепно
Great FIrst Gaming Build!
so glad I got this board. Screw Gigabyte and MSI unless its a pricey mobo over like $80-$90. This board overclocked my CPU Ryzen 3 3200G and 2x8GB Ram cards with ease. I got 3000mhz with each using xmp 2.0 profile selection in Bios and turned up to 3900 for 3.9 ghhz CPU boost, nothing more nothing less. So idk what all these other ucant statements in reviews are about unless your running higher than a ryzen 5 2400G. This runs smooth and ill be adding a radeon r560 or r570 graphics card in a month. Im soooo pleased with this. Worth every penny!
-CoolerMaster Masterbox M600L
-ASRock B450M-HDV R4.0 Socket AM4/ AMD Promontory B450/ DDR4/ SATA3&USB3.1/ M.2/ A&GbE/MicroATX Motherboard
-AMD Ryzen 3 3200G
-OLOy Memory DDR4 RAM 16GB (2x8GB) 3000 MHz CL16 1.35V 288-Pin Desktop Gaming
-Crucial 120GB SSD
-uphere 3-Pack Long Life Computer Case Fan 120mm Cooling Case Fan for Computer Cases Cooling 15LED Red,15R3-3
-Apevia RAPTOR450W ATX Power Supply
-Kingston 16GB DataTraveler 104 DT104 USB 2.0 Flash Drive Model DT104/16GB 50, 30MB/s Read, 5MB/s Write (DT104/16GB)
-CoolerMaster Masterbox M600L
-ASRock B450M-HDV R4.0 Socket AM4/ AMD Promontory B450/ DDR4/ SATA3&USB3.1/ M.2/ A&GbE/MicroATX Motherboard
-AMD Ryzen 3 3200G
-OLOy Memory DDR4 RAM 16GB (2x8GB) 3000 MHz CL16 1.35V 288-Pin Desktop Gaming
-Crucial 120GB SSD
-uphere 3-Pack Long Life Computer Case Fan 120mm Cooling Case Fan for Computer Cases Cooling 15LED Red,15R3-3
-Apevia RAPTOR450W ATX Power Supply
-Kingston 16GB DataTraveler 104 DT104 USB 2.0 Flash Drive Model DT104/16GB 50, 30MB/s Read, 5MB/s Write (DT104/16GB)
Katie H.
20.12.2020
2/10
Оценка пользователя
Ужасно
Died in 5 months
Board was not easy to install. Several headers were badly placed so my cables barely fit, and often the cable starts hitting the fan because they are so crammed together. GPU barely fit, ram was shoved so tightly against my fan that I didn't think it would actually fit. Then to top it off, 5 months after purchasing it, the board dies. I reached out to AsRock, since the board is so young, and never recieved a reply. This was my first, and seems to be my last time using AsRock. My old Gigabyte board was far easier to install and worked for years until I decided I wanted an upgrade.
I will update this if AsRock ever gets around to responding to my email, but I highly doubt they will. Avoid this board
I will update this if AsRock ever gets around to responding to my email, but I highly doubt they will. Avoid this board
Показаны отзывы 265-288 из 393.
