Отзывы о Кулер для процессора Cooler Master MasterLiquid ML360 RGB TR4 Edition
271 отзывов пользователей o Cooler Master MasterLiquid ML360 RGB TR4 Edition
Пользовались
Cooler Master MasterLiquid ML360 RGB TR4 Edit?
Поделитесь своим опытом и помогите другим сделать правильный выбор
Скроменый эксперт
15.10.2020
8/10
Оценка пользователя
Хорошо
Good
Скроменый эксперт
15.10.2020
10/10
Оценка пользователя
Великолепно
Great price and rgb.
What more can you ask for?
What more can you ask for?
Скроменый эксперт
15.10.2020
10/10
Оценка пользователя
Великолепно
Excelente Calidad...
Скроменый эксперт
15.10.2020
10/10
Оценка пользователя
Великолепно
Excellent product
Скроменый эксперт
15.10.2020
10/10
Оценка пользователя
Великолепно
My son is super happy with this product.
Скроменый эксперт
15.10.2020
10/10
Оценка пользователя
Великолепно
I use it for gaming and it performs well with great cpu temps. It was kind of hard installing it, but after 15 mins it worked!
Скроменый эксперт
15.10.2020
10/10
Оценка пользователя
Великолепно
No complaints
Скроменый эксперт
15.10.2020
6/10
Оценка пользователя
Плохо
One fan failed immediately, submitted RME,reserved confirmation, since that no answer. Replaced fan on my own expenses.
Скроменый эксперт
15.10.2020
4/10
Оценка пользователя
Ужасно
Me vinieron con detalle los les de los ventiladores, por lo que únicamente los dejé trabajando sin luces
Georgie
06.12.2020
2/10
Оценка пользователя
Ужасно
nothing about this cooler makes sense, the general quality of this product is inferior to every other aio cooler i have used;
every design choice cooler master made is biblically stupid, they haven't made one correct decision with this cooler.
my issues are:
the flex on the hose's is so small that you can't actually install this cooler into the front of a case, you can only install it above the motherboard, and in some cases you can't even do that due to the gap between the motherboard and the top of the case being to large and therefore this cooler cannot reach. ( makes it unusable)
the flex for the fan extenders (so that you can plug all the of the 3 fans into one pwm socket) is ridiculous short , meaning that you can't actually plug this into anywhere other than the first available fan header, and you are forced to completely disregard cable management.
the flex for the fan extenders is equidistant meaning that you can't actually use the fully reach of the small extender flex because as soon as you try to plug the header into a port which isn't directly inline with the middle of the radiator, the cables all fall apart as they didn't have the brain power over at cooler master to figure out that the bottom fan might need a slightly longer extender flex, than the top ( if that makes sense ).
the rad itself is pathetic by comparison to my old enermax, its not even funny how thin and sparse the fins are; and the general build quality and finish of the rad is shocking; sharp edges and thin metal I could bend with my little finger.
the hose's from the cooler protrude out of the bottom of the cpu block by a large margin, meaning you cannot install a graphics card into the top slot of my asus x399 prime a while this calamity is installed, it also doesn't make sense that the hose's come out the bottom of the block as its convention for the exit pipe to be out of the top of a cpu block(so that convection aids the process of cooling the cpu).
this cooler doesn't even get good thermals, the enermax liquid tech 2 absolutely destroys this thing under load keeping a 1920x a whole 8c cooler, which means this cooler is only slightly better than an normal water cooler.
avoid this cooler at all costs, unless you are using an matx case which can house a 360mm rad and don't mind the flaws i mentioned, otherwise this cooler is a complete bust and proves how little coolermaster cares about producing a good product.
i could design a better aio in my sleep, it will be returned due to it not even fitting in my case (which can support a 360mm rad) and returned due to the fact i can't even install a graphics card at the same time as using this (which on threadripper a chip which doesn't have igpu is kinda fecking important !!).
every design choice cooler master made is biblically stupid, they haven't made one correct decision with this cooler.
my issues are:
the flex on the hose's is so small that you can't actually install this cooler into the front of a case, you can only install it above the motherboard, and in some cases you can't even do that due to the gap between the motherboard and the top of the case being to large and therefore this cooler cannot reach. ( makes it unusable)
the flex for the fan extenders (so that you can plug all the of the 3 fans into one pwm socket) is ridiculous short , meaning that you can't actually plug this into anywhere other than the first available fan header, and you are forced to completely disregard cable management.
the flex for the fan extenders is equidistant meaning that you can't actually use the fully reach of the small extender flex because as soon as you try to plug the header into a port which isn't directly inline with the middle of the radiator, the cables all fall apart as they didn't have the brain power over at cooler master to figure out that the bottom fan might need a slightly longer extender flex, than the top ( if that makes sense ).
the rad itself is pathetic by comparison to my old enermax, its not even funny how thin and sparse the fins are; and the general build quality and finish of the rad is shocking; sharp edges and thin metal I could bend with my little finger.
the hose's from the cooler protrude out of the bottom of the cpu block by a large margin, meaning you cannot install a graphics card into the top slot of my asus x399 prime a while this calamity is installed, it also doesn't make sense that the hose's come out the bottom of the block as its convention for the exit pipe to be out of the top of a cpu block(so that convection aids the process of cooling the cpu).
this cooler doesn't even get good thermals, the enermax liquid tech 2 absolutely destroys this thing under load keeping a 1920x a whole 8c cooler, which means this cooler is only slightly better than an normal water cooler.
avoid this cooler at all costs, unless you are using an matx case which can house a 360mm rad and don't mind the flaws i mentioned, otherwise this cooler is a complete bust and proves how little coolermaster cares about producing a good product.
i could design a better aio in my sleep, it will be returned due to it not even fitting in my case (which can support a 360mm rad) and returned due to the fact i can't even install a graphics card at the same time as using this (which on threadripper a chip which doesn't have igpu is kinda fecking important !!).
Geoff
06.12.2020
10/10
Оценка пользователя
Великолепно
Very well made, quality cooler. Works well and completely covers the top of my 2950x, temps are around 33'c jumping to 44/46'c when under heavy load (PRIME95).
Amazon Customer
06.12.2020
10/10
Оценка пользователя
Великолепно
I am using this with the Ryzen Threadripper 1950x. Originally I used the Enermax TR4 but had problems with one of the fans not running and the CPU throttling like crazy even when the OS was just idling. As soon as I installed the Coolermaster, the machine became unsettlingly quiet and my CPU Tdie temps are min 23 and max 59 (under load). Very impressed
undefined
06.12.2020
8/10
Оценка пользователя
Хорошо
Good noise to cooling performance overall.
Just be aware that although the copper plate does cover the entire IHS of a thread ripper chip, the actual fins within the block do not (budgeting by marketing tear down images on the net). The fins are what tansfer the heat from the plate to the coolant liquid so there will not be much increase in performance over a standard smaller design.
The enermax liqtech tr4 would be the best AIO by far for thread ripper. But mine, like many others', has gunked up and died. Hence I am buying this replacement.
Overall, good value for money from coolermaster.
Just be aware that although the copper plate does cover the entire IHS of a thread ripper chip, the actual fins within the block do not (budgeting by marketing tear down images on the net). The fins are what tansfer the heat from the plate to the coolant liquid so there will not be much increase in performance over a standard smaller design.
The enermax liqtech tr4 would be the best AIO by far for thread ripper. But mine, like many others', has gunked up and died. Hence I am buying this replacement.
Overall, good value for money from coolermaster.
Ultrakipper
06.12.2020
6/10
Оценка пользователя
Плохо
Got a new 3960x and under load i get up to 90c Tried thermal paste in different ways. i will probably buy a different AIO when a better TR4 cooler comes out. ,, i am using Noctua NF-F12 fans and not the original , Maybe thats the cause ?
George Onosa
06.12.2020
6/10
Оценка пользователя
Плохо
The cooler is ok for a threadripper but those fans are really noisy. You need to change them if you want cooler temps and quiet as well.
The pump does some sounds but is working fine.
The pump does some sounds but is working fine.
Thomas R.
06.12.2020
6/10
Оценка пользователя
Плохо
This is cooling my threadripper 3970x and even under full load it goes barely above 70 degrees celsius on stock settings.
So the cooling is fine. The noise of the fans on high rpm not so much.
One of the fans creates an extremely annoying vibrating sound on high rpms which is rather distracting and forced me to buy different high static pressure fans.
I also got the other ml360 aio for an am4 socket on another pc where two fans made the exact same noise.
Other than that the package gives you everything you need. 3-way fan splitter, a splitter for the rgp connectors, double sided male connectors for the rgb splitter, rgb controller and a small tube of thermal paste. (i used a different thermal paste by arctic though.)
In short.
Cooling 10/10
Fan noise 2/10 (i guess you need to be lucky to get three silent fans.)
So the cooling is fine. The noise of the fans on high rpm not so much.
One of the fans creates an extremely annoying vibrating sound on high rpms which is rather distracting and forced me to buy different high static pressure fans.
I also got the other ml360 aio for an am4 socket on another pc where two fans made the exact same noise.
Other than that the package gives you everything you need. 3-way fan splitter, a splitter for the rgp connectors, double sided male connectors for the rgb splitter, rgb controller and a small tube of thermal paste. (i used a different thermal paste by arctic though.)
In short.
Cooling 10/10
Fan noise 2/10 (i guess you need to be lucky to get three silent fans.)
HUSSAM SWEID
06.12.2020
8/10
Оценка пользователя
Хорошо
It's doing a perfect job , nice cooler for Threadripper CPU
But i still hearing some noises coming from the Pump every time i stress the CPU
But i still hearing some noises coming from the Pump every time i stress the CPU
Chris
06.12.2020
2/10
Оценка пользователя
Ужасно
Je n’ai pas reçu le cable alim du rgb qui se nomme j sur la notice . Du coup mes ventilateurs ne s’alume pas .
Amazon Customer
06.12.2020
2/10
Оценка пользователя
Ужасно
I received a defective piece. It's making too much noise. I want replacement..
Miguel Ortega Vinuesa
06.12.2020
10/10
Оценка пользователя
Великолепно
todo muy bien gracias
Kushagra
06.12.2020
2/10
Оценка пользователя
Ужасно
Not fiitting in my amd ryzen 5 3600x ...
ababababa
06.12.2020
6/10
Оценка пользователя
Плохо
360㎜のラジエーターでTR4専用では価格が安い部類に入ります。電源を入れると，冷却液が流れる，ポコポコという音が聞こえますが，ケース内に入れてしまえば，私の耳には聞こえません。
冷却性能ですが，Cooler Master MasterCase MC500Pに，ケースの前面縦型に排気で設置，上面のファンは吸気，グリスにKryonaut を使用した場合，2950ⅹが自動オーバークロックで，全コア3.9Ghz程度になりました。全コア，オーバークロック時のCPUの温度は，RYZEN MASTER で約67度，付属のファンの回転数は，約2000RPMです。ファンの音は，ブーンという感じ。
また，冷却ファンを付属のファンより静圧性能の高い，D.F.Pressure / UCDFP12P に変更した場合は，全コア4.0～4.1Ghz程度，CPUの温度は，RYZEN MASTER で約67度，ファンの回転数は，約2000RPMです。ファンの音は，ゴー という感じ。CPUの電圧は，1.3vを超えていました。
付属のファンを変更すれば，冷却性能を上げることができましが，追加で出費がかかることを考えると，自動オーバークロックの性能を上げる目的がある方は，最初からもっと冷却性能が高いと思われるCPUクーラーを使うとよいのではと個人的には思います。
冷却性能ですが，Cooler Master MasterCase MC500Pに，ケースの前面縦型に排気で設置，上面のファンは吸気，グリスにKryonaut を使用した場合，2950ⅹが自動オーバークロックで，全コア3.9Ghz程度になりました。全コア，オーバークロック時のCPUの温度は，RYZEN MASTER で約67度，付属のファンの回転数は，約2000RPMです。ファンの音は，ブーンという感じ。
また，冷却ファンを付属のファンより静圧性能の高い，D.F.Pressure / UCDFP12P に変更した場合は，全コア4.0～4.1Ghz程度，CPUの温度は，RYZEN MASTER で約67度，ファンの回転数は，約2000RPMです。ファンの音は，ゴー という感じ。CPUの電圧は，1.3vを超えていました。
付属のファンを変更すれば，冷却性能を上げることができましが，追加で出費がかかることを考えると，自動オーバークロックの性能を上げる目的がある方は，最初からもっと冷却性能が高いと思われるCPUクーラーを使うとよいのではと個人的には思います。
Amazon Customer
06.12.2020
10/10
Оценка пользователя
Великолепно
2950Xで使用し初めて3960Xに移動してしようしてるけどよく冷える、
冬なんで室温低めの20℃くらいだけど負荷かけてもCPU温度は60℃までいかない。
しかもあまりうるさくない。
冬なんで室温低めの20℃くらいだけど負荷かけてもCPU温度は60℃までいかない。
しかもあまりうるさくない。
SJ Parkinson
06.12.2020
10/10
Оценка пользователя
Великолепно
I have a Threadripper 1950X CPU running with this unit. The fan noise is noticeable, but I wear a full cup wireless headset for gaming so not a big thing for me. Idle temps run around 36-37C (with Thermal Grizzly Kryonaut thermal grease) with jumps to 60C for gaming. This is typically Ultra settings on a Titan X-P video card @1440 - 165Hz and VR.
I plan on building a new gaming rig this fall on a 5000 series Threadripper and will be getting another of these for that project. Recommended.
I plan on building a new gaming rig this fall on a 5000 series Threadripper and will be getting another of these for that project. Recommended.
Показаны отзывы 241-264 из 271.
