Отзывы о Кулер для процессора Cooler Master MasterLiquid ML360 RGB TR4 Edition
271 отзывов пользователей o Cooler Master MasterLiquid ML360 RGB TR4 Edition
Пользовались
Cooler Master MasterLiquid ML360 RGB TR4 Edit?
Поделитесь своим опытом и помогите другим сделать правильный выбор
Paul C.
06.12.2020
4/10
Оценка пользователя
Ужасно
The ONLY reason to buy this would be because a full size air cooler won't fit in your case. For me, that's the SG13 case with a full size ATX power supply. It's tight in there. I was getting 76 degrees C with the stock air cooler. With this, and some modifications, like forcing the power supply fan on to double as a case fan, it now gets 63 degrees. Not bad.
However, I'm sure I could achieved better results with an air cooler, because:
Air coolers are pretty efficient. Even the right 20 dollar cooler can outperform most AIOs.
The heatsink plate on this AIO is rough as hell. It was not smooth to a mirror finish, it looks like a glacier ran over it. You'd think that if they bothered to build this and attach a water pump, a radiator and RGB they would also finish the plate properly. Nope. For that reason alone I don't recommend getting this.
Then, I was not able to mount the heatsink as I wanted to on my motherboard. I could only do 2 orientations. I could not put it all four because the cooler has an oval shape which rested on some nearby capacitors instead of touching the CPU.
And lastly, it required me to take out my motherboard to mount it to my LGA 15xx to install a backplate. It took me about 3 hours of putting it together and stress testing my PC to make it work with the micro ATX case I have. I chalk that up my special case (haha) which is notoriously difficult to cool properly but I don't think this the best the AIO world has to offer.
I didn't try the RGB because I didn't want the extra wires and it wasn't compatible with the ASUS 5v RGB header. Be aware of that, I don't consider a fault of this product, it seems ASUS are the ones behind the curve here.
However, I'm sure I could achieved better results with an air cooler, because:
Air coolers are pretty efficient. Even the right 20 dollar cooler can outperform most AIOs.
The heatsink plate on this AIO is rough as hell. It was not smooth to a mirror finish, it looks like a glacier ran over it. You'd think that if they bothered to build this and attach a water pump, a radiator and RGB they would also finish the plate properly. Nope. For that reason alone I don't recommend getting this.
Then, I was not able to mount the heatsink as I wanted to on my motherboard. I could only do 2 orientations. I could not put it all four because the cooler has an oval shape which rested on some nearby capacitors instead of touching the CPU.
And lastly, it required me to take out my motherboard to mount it to my LGA 15xx to install a backplate. It took me about 3 hours of putting it together and stress testing my PC to make it work with the micro ATX case I have. I chalk that up my special case (haha) which is notoriously difficult to cool properly but I don't think this the best the AIO world has to offer.
I didn't try the RGB because I didn't want the extra wires and it wasn't compatible with the ASUS 5v RGB header. Be aware of that, I don't consider a fault of this product, it seems ASUS are the ones behind the curve here.
KushielAOC
06.12.2020
2/10
Оценка пользователя
Ужасно
I'm sure there's people out there that have had good experience with the actual item working. Well, I received one that didn't work and Amazon said I inquire with CoolerMaster as it would be the better option. So I tried - Nearly a month of talking with them back and forth with them taking 3-5 business days to respond each inquiry, eventually stating the "Amazon invoice" was not good enough. They kept asking for pictures, asked if I could try another part (Which I had ordered by this time, and it worked just fine so it wasn't the installer), and kept ignoring my pleas for help.
Whilst in the process, I went ahead and ordered another brand because I just spent $1700 on a new PC Build and I wanted to use it. I eventually went back to Amazon and thankfully their support is wonderful and they gave me a full refund.
Honestly, never buying anything CoolerMaster again. It used to be a brand I recommended as an IT Professional, now I'm going to steer any customers away from them based off this experience.
Whilst in the process, I went ahead and ordered another brand because I just spent $1700 on a new PC Build and I wanted to use it. I eventually went back to Amazon and thankfully their support is wonderful and they gave me a full refund.
Honestly, never buying anything CoolerMaster again. It used to be a brand I recommended as an IT Professional, now I'm going to steer any customers away from them based off this experience.
Hector T.
06.12.2020
10/10
Оценка пользователя
Великолепно
I first had the ML120L in push-pull setup on my 8700K. Upgraded to a 9900K, and the small aio wasn’t good enough. It would almost always thermal throttle under a slight overclock of 4.9ghz. Looking for a new aio to accompany my cpu, I chose this after seeing it in at CES 2020. When I got the ML240L V2, it was a bit harder to install as the pump itself is larger than the first versions. It is tricky to get it on the cpu if the clearance is narrow. But it doesn’t interfere with ram clearence. What would interfere with the ram is the radiator if it was top mounted. In my Cooler Master H500 case, I top mounted the radiator with 4 fans in push-pull. My G.Skill Trident Z RGB ram barely clears it, but you’ll have to remove it if you want to remove/add ram and if you want to change the cpu. Thermal performance was very good. Dropped 10C lower, idle around 20-30C and don’t thermal throttle, not even at 5.0ghz. Do note that I did delid my cpu and applied Thermal Grizzly liquid metal to both the silicone and the aio coldplate. The rgb on the new Sickleflow 120 V2 looks nicer than the first version, the color is even throughout the fans and the leds don’t bleed through. There are more cables involved, but that’s a given on this kind of aio. The pump is still a 3 pin dc, but it works fine. If you plan to use 4 fans for push-pull, you will need to buy extra screws as the aio only comes with enough screws for 2 fans. You would need 8 more screws at 30mm long, 6/32”. Glad I bought the ML240L V2 and recommend it as a solid aio choice.
C. Beauregard
06.12.2020
10/10
Оценка пользователя
Великолепно
This is my 4th aio closed loop cpu cooler. First time I get something other than a corsair.
I've only had it one day so I can't judge it on durability yet.
I'm installing it on a 5yo cpu with LGA 2011 V3 socket.
Installation was easy:
1. Install 2 brackets with 2 screws each to the pump assembly.
2. Find the correct double ended screws and install on your mobo.
3. Install the fans on the radiator with toolless thumbscrews. Nice touch.
4. Remove plastic film, add thermal paste (included) and install block on top of cpu with 4 provided screws. A 2nd person can help hold the radiator while you install the cpu block
5. Plug in pump to cpu1 header and fans into provided splitter which plugs into cpu2 (cpuopt) header
6. Plug in 3 rgb headers (optional) with included splitter.
Cooling is great, with games running at a cool 65C.
I tried max fan, and it does get loud, these aren't silent fans when on full power, but they're very quiet on ordinary load. I can run games cool without the fans spinning up. This of course depends on your fan configuration if you customize that.
I've only had it one day so I can't judge it on durability yet.
I'm installing it on a 5yo cpu with LGA 2011 V3 socket.
Installation was easy:
1. Install 2 brackets with 2 screws each to the pump assembly.
2. Find the correct double ended screws and install on your mobo.
3. Install the fans on the radiator with toolless thumbscrews. Nice touch.
4. Remove plastic film, add thermal paste (included) and install block on top of cpu with 4 provided screws. A 2nd person can help hold the radiator while you install the cpu block
5. Plug in pump to cpu1 header and fans into provided splitter which plugs into cpu2 (cpuopt) header
6. Plug in 3 rgb headers (optional) with included splitter.
Cooling is great, with games running at a cool 65C.
I tried max fan, and it does get loud, these aren't silent fans when on full power, but they're very quiet on ordinary load. I can run games cool without the fans spinning up. This of course depends on your fan configuration if you customize that.
Irving
06.12.2020
10/10
Оценка пользователя
Великолепно
My Enermax (Second Gen) was starting to die. I just recently sent it in for an RMA. I picked up this cooler master AIO for TR4. Before installing it, I read the reviews and even saw photos where people were breaking their coolers due to too much pressure or over tightening. I can tell you it is NOT PLASTIC. I did take caution when installing this cooler. All I can say is WOW! 25c idle 47c under load. When OC'd (2950x) I get 34c idle and won't go above 60c under load. Best AIO for TR4. Stay away from ENERMAX Liqtech I and II.
Cody D.
06.12.2020
2/10
Оценка пользователя
Ужасно
This product is junk. Mounting tabs on the pump broke before it was even half way tight enough. Pump and block assembly is made of the cheapest plastic on the market. It truly is shameful that Cooler Master would sell a product like this at this price point.
Nathan B.
06.12.2020
10/10
Оценка пользователя
Великолепно
I was previously using a much older Corsair AIO liquid cooler and although it worked fine, with a fair bit of overclocking I was idling at 50-55C and would peak at about 80C while doing some heavy gaming. I let this go on for quite some time before it started to bother me. I tweaked fan settings and profiles and managed to get down a few degrees but nothing major. I stumbled upon this Cooler Master about a week ago and it was on sale so I thought, WHY NOT?
Installation: To be honest looking at the little flip open book of instructions at first made my scratch my head. However after actually looking at it and following it, this install is very straight forward. Attach plate to back of board, setup mounting screws, attach cooler head, mount radiator and fans, done.
Performance: The performance is fantastic. Could you get better out of larger systems? I imagine so. Could you get worse out of smaller units? Most definitely. When it comes down to numbers though, it shines. As stated above I was idling around 50-55C and now I idle around 38-42C, an impressive drop. Gaming temps: 72C peak.
Noise: Extremely quiet. I have other case fans that most definitely make more noise than this cooler does, by a long shot. The only noise I really get out of it is the occasional sound of liquid moving, or whatever you wish to call it.
Appearance: Beautiful. The lights are crisp, can be turned down or off completely and you can cycle through various colors or stop at the typical RGB rainbow cycle.
TL;DR: Buy this cooler. It works extremely well, looks great, install is easy.
Installation: To be honest looking at the little flip open book of instructions at first made my scratch my head. However after actually looking at it and following it, this install is very straight forward. Attach plate to back of board, setup mounting screws, attach cooler head, mount radiator and fans, done.
Performance: The performance is fantastic. Could you get better out of larger systems? I imagine so. Could you get worse out of smaller units? Most definitely. When it comes down to numbers though, it shines. As stated above I was idling around 50-55C and now I idle around 38-42C, an impressive drop. Gaming temps: 72C peak.
Noise: Extremely quiet. I have other case fans that most definitely make more noise than this cooler does, by a long shot. The only noise I really get out of it is the occasional sound of liquid moving, or whatever you wish to call it.
Appearance: Beautiful. The lights are crisp, can be turned down or off completely and you can cycle through various colors or stop at the typical RGB rainbow cycle.
TL;DR: Buy this cooler. It works extremely well, looks great, install is easy.
Скроменый эксперт
15.10.2020
10/10
Оценка пользователя
Великолепно
Además del precio al que lo conseguí ($1200 ), sus colores RGB combinan con los demás ventiladores, mantiene las temperaturas por debajo de los 45° en máximo o 58° en estado de reposo.
Edito 28 de Junio: A los 3 meses se rompió la base simplemente por que es de plástico(Lo único bueno fue que ya había apagado la cpu si no hasta el procesador se hubiera quemado).
Mandé el producto ya que autorizaron mi reemplazo y después de 5 días me contesto el distribuidor autorizado y hará el reemplazo de mi producto.
Edito 28 de Junio: A los 3 meses se rompió la base simplemente por que es de plástico(Lo único bueno fue que ya había apagado la cpu si no hasta el procesador se hubiera quemado).
Mandé el producto ya que autorizaron mi reemplazo y después de 5 días me contesto el distribuidor autorizado y hará el reemplazo de mi producto.
D.T.R.
06.12.2020
6/10
Оценка пользователя
Плохо
I will say that the mounting of the device was super smooth and easy. (For me) The bracket fit perfectly, the kit comes with thermal paste and multiple types of mounting gear for various boards. Mine as a 115x, and it went as good as good be.
I was replacing an air cooler that just bugged me due to the size and because it looked like it was going to bend and rip my mother board in half with its weight. Also, the fan was always ramped up keeping the CPU cool enough. This was a nice equivalent water cooler. With the 120mm size, you are not looking insane cooling numbers, a little better than air, but WAY quieter. Pump is silent. I couldn't fit a radiator bigger in my case, so such is life.
A few notes:
Comes with a LED splitter which works great with my Asus maximus 9 MB. Needed to start up the Aura software and then it was working immediately when choosing the LED header I used.
Pump and fan leads both work with the MB as well, if it needs more cooling, they increase in speed as needed.
LED is nice looking, clean and label free. Not as cool as a Kraken, but lit up so I like it.
Cooling is about as good as the air cooler at standard usage. Under stress though, this starts to shine a little. The air cooler peaked at 95c, this will not get past 83c. Larger radiators I'm sure would perform better. Plus my fan is in a slightly not ideal air flow location, but given normal use never crosses 60c I'm not worried about it.
UPDATE: Pump is fine, but after only a few weeks of use, the fan on the radiator is buzzing and off balance. Bearings didn't last at all. Had to go buy a third party fan which is ridiculous for brand new product. 4 stars to 3.
I was replacing an air cooler that just bugged me due to the size and because it looked like it was going to bend and rip my mother board in half with its weight. Also, the fan was always ramped up keeping the CPU cool enough. This was a nice equivalent water cooler. With the 120mm size, you are not looking insane cooling numbers, a little better than air, but WAY quieter. Pump is silent. I couldn't fit a radiator bigger in my case, so such is life.
A few notes:
Comes with a LED splitter which works great with my Asus maximus 9 MB. Needed to start up the Aura software and then it was working immediately when choosing the LED header I used.
Pump and fan leads both work with the MB as well, if it needs more cooling, they increase in speed as needed.
LED is nice looking, clean and label free. Not as cool as a Kraken, but lit up so I like it.
Cooling is about as good as the air cooler at standard usage. Under stress though, this starts to shine a little. The air cooler peaked at 95c, this will not get past 83c. Larger radiators I'm sure would perform better. Plus my fan is in a slightly not ideal air flow location, but given normal use never crosses 60c I'm not worried about it.
UPDATE: Pump is fine, but after only a few weeks of use, the fan on the radiator is buzzing and off balance. Bearings didn't last at all. Had to go buy a third party fan which is ridiculous for brand new product. 4 stars to 3.
Скроменый эксперт
15.10.2020
10/10
Оценка пользователя
Великолепно
Works fine keeps my ryzen 5 3600 nice and cool
The pump is nice and quiet
The pump is nice and quiet
Jimbo Mcallister
06.12.2020
10/10
Оценка пользователя
Великолепно
I was using the stock Intel cooler (the short, stubby one) a Core i7 4790K, and on heavy CPU load the temps shot up to 100C within 20 secs, causing thermal throttling to kick in. I couldn't even really play games or do anything slightly CPU intensive without some thermal thottling. So yeah, the stock Intel cooler is not enough for this enthusiast CPU. So, I bought the Coolermaster AIO Water cooler out of hope/desperation, but I didn't expect much from it, because my current temps were so dismal and because nothing ever works out for me. I was surprised and delighted to see my temps drop by a wide margin.
BEFORE: Idle ~38C, Load 85-100C, Stress >100C (throttled)
AFTER: Idle ~26C, Load 40-55C, Stress 60-75C
Amazing. Installation was not too bad, took about 20-30 minutes. The fan makes some noise, but what do you expect, it's a fan.
BEFORE: Idle ~38C, Load 85-100C, Stress >100C (throttled)
AFTER: Idle ~26C, Load 40-55C, Stress 60-75C
Amazing. Installation was not too bad, took about 20-30 minutes. The fan makes some noise, but what do you expect, it's a fan.
Скроменый эксперт
15.10.2020
2/10
Оценка пользователя
Ужасно
This producted failed after 2 months of operation. I do not recommend.
Ted
06.12.2020
10/10
Оценка пользователя
Великолепно
I was planning to build a new Gaming and VR PC when I bought this. I originally picked out a basic fan cooler, but when I was shopping around, I found this for only a little extra, like $10 more than the fan I had picked out. I never did a liquid CPU cooler before, but I decided to give it a shot after the last fan cooled PC I built sounded a lot like a jet taking off from a USAF aircraft carrier when it was under heavy load.
I'll start with the only downside to this versus a fan & heatsink. It takes more space, and so a little more time to fit everything in place. With that being said, it's actually easier than I imagined it might be. I love that I was able to kind of wrap the excess wires around the fans and radiator to tuck them out of the way and out of sight. What I got was the ML240L RGB V2, and one of the most pleasant surprises about it is the fact that you can skip installing the RGB controller and all that mess that comes with it, if you have a motherboard that has RGB headers like my Asus. I think that's a feature that's new with the Version 2, and I LOVE it!
The whole thing is super quiet, compared to a fan & heatsink setup it's virtually silent. The lights are gorgeous. I'm using this on an Intel i7 10700k overclocked to 5.1 GHZ and it's truly magnificent, flawless even. (So far at least)
The full build:
CPU = Intel i7 10700k (with this CPU cooler obviously)
Motherboard = Asus TUF gaming Z490-Plus (wi-fi)
RAM = 64GB G Skill Ripjaws V
Video = Asus Nvidia RTX 2070
SSD = 1TB Samsung 970 Evo Plus
Chassis = Corsair Cyrstal 570X
PSU = EVGA 600BQ
Case Fans = 3x ThermalTake Riing RGB Plus Premium
+ keyboard, mouse, hard drives and other accessories
I'll start with the only downside to this versus a fan & heatsink. It takes more space, and so a little more time to fit everything in place. With that being said, it's actually easier than I imagined it might be. I love that I was able to kind of wrap the excess wires around the fans and radiator to tuck them out of the way and out of sight. What I got was the ML240L RGB V2, and one of the most pleasant surprises about it is the fact that you can skip installing the RGB controller and all that mess that comes with it, if you have a motherboard that has RGB headers like my Asus. I think that's a feature that's new with the Version 2, and I LOVE it!
The whole thing is super quiet, compared to a fan & heatsink setup it's virtually silent. The lights are gorgeous. I'm using this on an Intel i7 10700k overclocked to 5.1 GHZ and it's truly magnificent, flawless even. (So far at least)
The full build:
CPU = Intel i7 10700k (with this CPU cooler obviously)
Motherboard = Asus TUF gaming Z490-Plus (wi-fi)
RAM = 64GB G Skill Ripjaws V
Video = Asus Nvidia RTX 2070
SSD = 1TB Samsung 970 Evo Plus
Chassis = Corsair Cyrstal 570X
PSU = EVGA 600BQ
Case Fans = 3x ThermalTake Riing RGB Plus Premium
+ keyboard, mouse, hard drives and other accessories
Скроменый эксперт
15.10.2020
2/10
Оценка пользователя
Ужасно
Después de instalarlo comenzó a tirar liquido, por suerte me di cuenta de inmediato; después de leer al respecto, sucede seguido, en algunos casos tira liquido y en otros se rompen unas patitas de plástico sobre las cuales están montadas las placas de metal, mi recomendación seria que busquen otro modelo para TR4, si de todas formas compran este, no aprieten los tornillos! casi en cuanto den media vuelta para que se sostengan es suficiente, yo estoy esperando el reembolso.
Joseph C.
06.12.2020
8/10
Оценка пользователя
Хорошо
Didn't like Noctua's answers regarding the maximum thermal handling of one of their compact air coolers (they apparently have no general guidelines for this, for any cooler,) so I went watercooled. This is a decent AIO unit with a solid copper water block, comes with all the required mounting bits for various Intel and AMD sockets as well as a small tube of Mastergel Pro thermal paste. Installation took all of 15 minutes on an LGA2011-v3 socket, very simple and straightforward. Good performance for a 120mm kit, does fine at keeping the package temperature of a Xeon E5-1660v3 clocked to 4.4GHz below 65C under normal (non-stress) loads but it will heat soak relatively quick not having much thermal mass. Definitely sufficient cooling for most all of my day-to-day use cases. Knocked off a star because the included RGB controller is a complete and total joke, and I don't see how CoolerMaster has the audacity to tout it as a feature. You're much better off getting an IR or WiFi LED controller for $10 and splicing it into a Molex if you don't have RGB headers.
Скроменый эксперт
15.10.2020
10/10
Оценка пользователя
Великолепно
Don’t waste your time looking for a different AIO Cooler. I cannot express enough how happy I am with this. I tried the GamerStorm 3 fan AIO and it was hard to install, and noisy. I had previously done a build with this Cooler Master fan and didn’t notice any noise so I decided to return the GamerStorm one and get this again. I can’t believe how obvious the quality is in this compared to the other. The screws go in easier, installation is smoother, the tubes are braided not just rubber, the RGB is amazing, and most of all.....they are WHISPER SILENT!!!!! I HIGHLY recommend this AIO for anyone looking for a quality liquid cooler at a great price.
Bassel
06.12.2020
4/10
Оценка пользователя
Ужасно
In my case I couldn't mount it on top on when tried to do so to the front I had to remove my bottom 3rd fan because the radiator took so much space rather than I thought it would, so that took a bit because of my smaller case, and then when I finally got it in the tubes weren't long enough to reach when mounted with the tubes at the bottom as it is the correct orientation.
So is this cooler right for you? I believe if you have enough clearance above your motherboard to mount it there, then get this cooler, if not then don't even bother mounting it to the front with the tubes up, because over time you will get more noise and it won't get better.
In the end, I believe mine was broken but it is not most likely going to happen to you so if you like the cooler get it.
TLDR: Good AIO only if you can mount it on top, comes with everything including thermal paste but not a screwdriver, you need a Phillips screw. Mine was broken but not a bad cooler.
So is this cooler right for you? I believe if you have enough clearance above your motherboard to mount it there, then get this cooler, if not then don't even bother mounting it to the front with the tubes up, because over time you will get more noise and it won't get better.
In the end, I believe mine was broken but it is not most likely going to happen to you so if you like the cooler get it.
TLDR: Good AIO only if you can mount it on top, comes with everything including thermal paste but not a screwdriver, you need a Phillips screw. Mine was broken but not a bad cooler.
Скроменый эксперт
15.10.2020
2/10
Оценка пользователя
Ужасно
PLASTIC people, Cooler Master used PLASTIC to anchor the METAL brackets that fasten the pump/res. onto the cpu. They used PLASTIC !!! What happens to PLASTIC when you apply force onto it? YES that is correct, IT BREAKS. ALL 4 little PLASTIC nubs used to anchor the METAL brackets broke. Look at the pictures. They used PLASTIC in part of the fastening system for the biggest cpu in the market. PLASTIC PEOPLE !!! Cooler Master you have been blacklisted for even thinking this would work !!! TOTAL WASTE of my money !!!
Calvin
06.12.2020
8/10
Оценка пользователя
Хорошо
I had this AIO for almost 4 months, overall its a decent AIO for the price. No leaks so far, no issues yet.
I set this as an exhaust and it cools like R5 3600 to around 35-45c idle, 60-70c gaming. Video encoding is around 70-75c.
The included fans are not that great IMO, it makes a buzzing noise. Don't think its defective since they both make buzzing noise. I replaced them with PCcooler "Bitwit" fans and they don't make noise and looks great.
The pump makes slight buzzing noise at 100%, i dropped my pump speed to 40% to extend it's life and there are 0 noise as a result. Dropping to 40% has a slight 1-2c difference.
If you are using an AMD CPU, make sure you have your AMD bracket that came with your motherboard. This AIO needs it to mount. Mounting is a bit of a pain and can be tricky, takes a while to get it in...overall wish they used a different mounting system.
Other issues i faced is that the screws can strip your screw hole pretty easily, try not to put too much force when tightening the screw.
I set this as an exhaust and it cools like R5 3600 to around 35-45c idle, 60-70c gaming. Video encoding is around 70-75c.
The included fans are not that great IMO, it makes a buzzing noise. Don't think its defective since they both make buzzing noise. I replaced them with PCcooler "Bitwit" fans and they don't make noise and looks great.
The pump makes slight buzzing noise at 100%, i dropped my pump speed to 40% to extend it's life and there are 0 noise as a result. Dropping to 40% has a slight 1-2c difference.
If you are using an AMD CPU, make sure you have your AMD bracket that came with your motherboard. This AIO needs it to mount. Mounting is a bit of a pain and can be tricky, takes a while to get it in...overall wish they used a different mounting system.
Other issues i faced is that the screws can strip your screw hole pretty easily, try not to put too much force when tightening the screw.
Скроменый эксперт
15.10.2020
10/10
Оценка пользователя
Великолепно
Este me gusto mas ya que es de una buena marca y no es caro como otros, funciona de maravilla en my ryzen 5 2600, en idle la temperatura ronda los 36 a 38 grados Celsius, jugando no pasa de 46 grados Celsius, en 100% de uso no pasa de 60, los ventiladores no acen mucho ruido, ya llevo usandolos durante casi 3 meses y no e tenido ningun problema
Hao
06.12.2020
8/10
Оценка пользователя
Хорошо
Overall a good product, with one problem. I got single fan version, and a part No.L in instruction was missing. It's used for two fan version. The entire system is assume you have two CPU FAN connectors on your motherboard, but for me, I just got one. The part No.L, a CPU FAN connector splitter, would be very handy, but, its not in the package.
I use extra cable to get one power from power supply and manually make one connector, thank you my EVGA power supply which I can remove unnecessary cables. It's like old days when we only use PATA devices, a lot of nostalgia during the process. But I can only supply power only (black and red, not white and green), guess I lost sensor or other control functions.
Hope CoolerMaster can make this part standard for all the products and never assume user have TWO CPU fan connectors, and there is no case fan connector on the motherboard too.
I use extra cable to get one power from power supply and manually make one connector, thank you my EVGA power supply which I can remove unnecessary cables. It's like old days when we only use PATA devices, a lot of nostalgia during the process. But I can only supply power only (black and red, not white and green), guess I lost sensor or other control functions.
Hope CoolerMaster can make this part standard for all the products and never assume user have TWO CPU fan connectors, and there is no case fan connector on the motherboard too.
Скроменый эксперт
15.10.2020
8/10
Оценка пользователя
Хорошо
Product keeps my cooler significantly lower than my stock cooler by about 15 degrees celsius under load. This is a great cooler if you are looking for RGB. The tubes ar egos enough length and the thumb screws and vibration pads are great features. Super easy installation I’m a little annoyed it couldn’t fit on my top fan spots on my phantek 400 but it looks beautiful keeps my pc cool and does so quietly.. Rated 4 stars as the cooling can be better. Although you sacrifice a few degrees for the RGB. Which is fair. So if you’re here it’s likely you want RGB. Make sure you have space before you buy read the specs!!! If you want the best AIO cooling dual rad around this price get the ARTIC liquid freezer II if you don’t care about RGB. If you want RGB you seriously can’t go wrong with this purchase !!! Everything included except the mounting bracket for your mobo. Most mobos come with a stock bracket but if you are using the stock cooler you may have thrown out the mounting bracket. CHECK FOR THIS AS ITS CRUCIAL
Z
06.12.2020
8/10
Оценка пользователя
Хорошо
This AIO keeps the CPU very cool. 4.1GHz all 16Cores @ 73C while rendering for hours! The pump is very quite, but the fans suck bad :( They make a grinding noise once in a while; which is very common with CoolerMaster AIO. I replaced the fans with ML120 PRO. Now I am very happy.
I switched from an air cooler to this AIO only because of my PC case size. The temperature improved, and the CPU (2950x) frequency was very stable when rendering for hours. If you just run Cinabench you will not see any meaningful difference.
A quick tip: if you are hearing noise coming from your case while using an AIO, try replacing metal screw with rubber pivots on your case fans. Sometimes oscillations and vibrations can cause unpleasant sounds.
I switched from an air cooler to this AIO only because of my PC case size. The temperature improved, and the CPU (2950x) frequency was very stable when rendering for hours. If you just run Cinabench you will not see any meaningful difference.
A quick tip: if you are hearing noise coming from your case while using an AIO, try replacing metal screw with rubber pivots on your case fans. Sometimes oscillations and vibrations can cause unpleasant sounds.
Скроменый эксперт
15.10.2020
8/10
Оценка пользователя
Хорошо
Initial review as I’ve only had this product for a little bit, so I’ll probably edit this in a few months.
*TLDR at the bottom
So far so good. The mounting system for the TR4 socket is made from a metal plate and is very sturdy and the water block is a heavy duty plastic with a good amount of thickness.
The other 1 star review showing photos of it looks as if when mounting this block they tighened one corner more than the rest therefore overstressing the material to break. Sure it's a product flaw but I had no issues being careful as to equalise the inital mounting, and then tighening.
The metal mount is very easy to line up, slot and tighten. The heat sink coverage is 100% on the cpu and was satisfied with the contact as it was smooth and even throughout.
The mounting screws for the 120mm fans was the most difficult as the stock fans didn’t line up to every screw hole on the radiator.
I tested the hole lineups of the stock fans and my own Corsair ML120 fans and nothing was awry so the radiator was the issue. Despite this I mounted all three fans on minus two screws, but the tightness was more than enough to stop any rattle.
This issue of the screw holes on the radiator also made it a pain to mount in my full tower as the supposed 120mm line up was off. Regardless I managed to put it on minus a few screws but enough to get solid stability. I never had either of these issues with my old Enermax TR4 (1st Gen).
(10/12 screws on for 3x Fans and about 6/12 for radiator mounting to case).
As for the cooling at stock on my 1950x threadripper. I’m hitting 33 degrees average on idle and playing a game (Rise of the tomb raider on ultra settings) for 20 minutes was hitting around 42-45 degrees.
Apart from installing the cooling system I’m very happy with the results for now.
TLDR:
Pros:
Silent pump
100% threadripper coverage.
Mounting is easy
nice cool temps idle and under load.
RGB lighting if you like shiny things.
Cons:
Installation of fans and mounting to case was hard only for the fact the radiator did not perfect spacing with the screw hole manufacturing.
Default fans are loud without mounting. Though radiators always generate noise because of the thin mesh so this point is to specifically refer to the fan itself.
*TLDR at the bottom
So far so good. The mounting system for the TR4 socket is made from a metal plate and is very sturdy and the water block is a heavy duty plastic with a good amount of thickness.
The other 1 star review showing photos of it looks as if when mounting this block they tighened one corner more than the rest therefore overstressing the material to break. Sure it's a product flaw but I had no issues being careful as to equalise the inital mounting, and then tighening.
The metal mount is very easy to line up, slot and tighten. The heat sink coverage is 100% on the cpu and was satisfied with the contact as it was smooth and even throughout.
The mounting screws for the 120mm fans was the most difficult as the stock fans didn’t line up to every screw hole on the radiator.
I tested the hole lineups of the stock fans and my own Corsair ML120 fans and nothing was awry so the radiator was the issue. Despite this I mounted all three fans on minus two screws, but the tightness was more than enough to stop any rattle.
This issue of the screw holes on the radiator also made it a pain to mount in my full tower as the supposed 120mm line up was off. Regardless I managed to put it on minus a few screws but enough to get solid stability. I never had either of these issues with my old Enermax TR4 (1st Gen).
(10/12 screws on for 3x Fans and about 6/12 for radiator mounting to case).
As for the cooling at stock on my 1950x threadripper. I’m hitting 33 degrees average on idle and playing a game (Rise of the tomb raider on ultra settings) for 20 minutes was hitting around 42-45 degrees.
Apart from installing the cooling system I’m very happy with the results for now.
TLDR:
Pros:
Silent pump
100% threadripper coverage.
Mounting is easy
nice cool temps idle and under load.
RGB lighting if you like shiny things.
Cons:
Installation of fans and mounting to case was hard only for the fact the radiator did not perfect spacing with the screw hole manufacturing.
Default fans are loud without mounting. Though radiators always generate noise because of the thin mesh so this point is to specifically refer to the fan itself.
Показаны отзывы 73-96 из 271.
