Отзывы о Твердотельный накопитель ADATA XPG SX8200 Pro 1TB
499 отзывов пользователей о ADATA XPG 1024 GB XPG SX8200 Pro 1TB
Пользовались
ADATA XPG 1024 GB XPG SX8200 Pro 1TB?
Поделитесь своим опытом и помогите другим сделать правильный выбор
Great drive.
Almost all other SSDs (except few by ADATA) are returnable. I did not observe that while buying and now stuck with expensive TLC performance drive that performs by a QLC drive like Crucial P1 - basically gives 50-70% of the advertised numbers for read and write.
Since, its non-returnable Amazon has said they won't do anything (return, replacement or refund) and I need to run behind ADATA for further action.
So, all buyers please pay attention to return policy on SSD (I didn't). It must not be non-returnable. If it is marked non-returnable, in all likelihood, the seller is disposing off lower binned items (or worse case, non-working items) and is fully aware of it.
At the time of posting this review, I can see most of ADATA's performance drives are marked as non-returnable. But their regular drives are returnable. So, there is definitely something fishy. I have notified Amazon as well but I don't think they will do anything.
En primera para que un disco alcance las velocidades que dice debe de tener un buen hardware, principalmente la RAM y el procesador ya que de estos depende principalmente el BENCHMARK que se le aplique. La verdad dudo que en una laptop de todo el ancho.
Por otro lado los 3500 MB/s en lectura y 3000 MB/s en escritura son solo para la versión de 1TB según el fabricante, incluso el fabricante da tablas de velocidades que debería registrar el software que se use para el BENCHMARK.
También dependiendo del software serán las velocidades, yo utilicé el ATTO y el CDM(Crystal Disk Benchmark) y en el CDM aunque cambien de versión de software si no cambian el 1GiB por un valor mayor como 4 o en mi caso que usé 8GiB, no se van a alcanzar los 3500 y 3000 que dice el fabricante.
En ATTO obtuve 3200MB/s Read y 2800MB/s Write.
En CDM obtuve 3456MB/s Read y 3046MB/s Write.
Estos son valores que coinciden perfectamente, aunque la verdad es lo que me interesa en menor parte, ya que en un uso normal, no se siente mucho la diferencia entre un SSD y un NVME, ni en el encendido, así que si no usan el NVME para algo que de verdad mueva grandes cantidades de información como edición de videos o algo así, mejor piensen bien en su compra. Ya que si solo lo quieren para que prenda más rápido y quieren comprar un NVME de 256GB y los juegos los van a seguir metiendo en un HDD mecánico, no tiene caso porque no va a cambiar las velocidades, mejor inviertan en una memoria OPTANE que es más barata y tendrá mejor compatibilidad con su HDD mecánico.
En conclusión, si vienen de un SSD Sata y no lo van a usar para algo como edición de video, no van a sentir mucha diferencia. Por otra parte por el precio de $3047.00 MXN vale la pena gastarlos en la capacidad de 1TB comparado con un SSD SATA de la misma capacidad.
NOTAS:
No trae tornillo M2x4.
El disipador no tiene mucho caso, pero si su Motherboard trae espacio para NVME con disipador propio, es mejor usar el disipador de la tarjeta madre, ya que el de la caja es una laminita del grueso de una cartulina.
Si están pensando en comprar el XPG S11 (que es más caro) piensen si lo que necesitan es el SSD con disipador ya que es la única diferencia, en todas las demás características es lo mismo.
Las temperaturas son muy buenas.
Transferring a system using Acronis takes a few minutes (unless transferring from a large hard disk when you remember why you need the ssd).
It is a relief to not have to choose what to store on the fastest tier of storage in the system, at least for a while.
It would be helpful if it came with a fixing screw but some motherboards have different size screws. Even my two MSI motherboards have different threads from each other for both standoff and fixing screw. It does come with a heat sink of sorts although I would prefer to use a better one when it is buried underneath a hot graphics card.
Even though I only got the 1TB version this was still a massive steal for my money, I would have got a higher one if I had the money at the time, and I'm considering upgrading my SSD anyway, it's going to be a pain to open it all up but oh well.
Anyway yeah, in conclusion, this is worth the value. I couldn't endorse this any higher, it's the best storage I've ever had. And it's amazing loading into games before I can even snap my fingers.
The internet has a few articles on ADATA swapping out the controllers in the SX8200 Pro with apparently a slower model - and this could explain my speeds, but I haven't figured out how to identify which is which, so take this part with a grain of salt.
CrystalDiskMark x64 results with the NVMe settings:
[Read]
SEQ 1MiB (Q= 8, T= 1): 3021.685 MB/s [ 2881.7 IOPS] < 2434.28 us>
SEQ 128KiB (Q= 32, T= 1): 3078.758 MB/s [ 23489.1 IOPS] < 1319.36 us>
RND 4KiB (Q= 32, T=16): 1363.035 MB/s [ 332772.2 IOPS] < 1489.46 us>
RND 4KiB (Q= 1, T= 1): 69.957 MB/s [ 17079.3 IOPS] < 58.46 us>
[Write]
SEQ 1MiB (Q= 8, T= 1): 2436.534 MB/s [ 2323.7 IOPS] < 3414.58 us>
SEQ 128KiB (Q= 32, T= 1): 2374.058 MB/s [ 18112.6 IOPS] < 1756.08 us>
RND 4KiB (Q= 32, T=16): 1062.997 MB/s [ 259520.8 IOPS] < 1964.70 us>
RND 4KiB (Q= 1, T= 1): 205.643 MB/s [ 50205.8 IOPS] < 19.83 us>
Profile: Default
Test: 1 GiB (x5) [D: 0% (0/768GiB)]
Mode: [Admin]
Time: Measure 5 sec / Interval 5 sec
Date: 2020/12/06 18:13:56
OS: Windows 10 Professional [10.0 Build 19042] (x64)
Temperature during testing peaked at 70 Celsius (with the thin heatsink sheet included with the drive), which seems plenty reasonable.
The software to use to transfer my data didn't work either so I used a free one that worked great
I have noticed that games run a bit smoother.
Came with a flat metal heat sink, never used it as it only cools one side of the drive, so used an after market cooler.
Happy with purchase and the 5 year warranty.
I believe this should come with a 2280 screw, that's why I am giving 4 stars.
the adapter i used with this is StarTech.com x4 PCI Express to M.2 PCIe SSD Adapter.
The good;
It works, I booted a Linux live USB image and the Adata NVMe was detected properly.
The bad;
This Adata NVMe is double-sided (has components on both sides of the PCB), and there is basically no space for a double-sided PCB in this notebook, as such I cannot get it properly in place without putting too much stress on the PCB of the Adata NVMe. As such I cannot use it in this computer.
So before ordering this item, be sure you have space for a double-sided NVMe. I did not see this mentioned in the specs here on Amazon (which is why I took points away), but then to be honest I was not aware myself this was even a potential issue. Instead I should have gotten the (more expensive) Samsung Evo 970 Plus NVMe, as that is a single-sided PCB.
I will probably keep the NVMe, as I was going to do another desktop PC build, and use it for that instead.





