Отзывы о Твердотельный накопитель ADATA XPG SX8200 Pro 2TB
348 отзывов пользователей о ADATA 2048 GB XPG SX8200 Pro 2TB
Пользовались
ADATA 2048 GB XPG SX8200 Pro 2TB?
Поделитесь своим опытом и помогите другим сделать правильный выбор
Boot up time is seconds which is impressive. Installation was very easy. I didn't need to change anything in my mobo BIOS to be able to install windows from usb on to it which was a pleasant surprise. I read a lot of articles prior to installing saying its tricky to install windows on an M.2 drive but this just wasn't the case.
Windows took around 10-15 minutes to install.
It came with its own heat-sink which was a nice touch, I didn't use this as my mobo has its own. I just can get over how small these drives are physically, incredible!!! Gives a much neater look to a case without the power or data leads everywhere!
Chose the ADATA XPG over the slightly cheaper but slower PNY XLR8 CS3030 M.2 NVMe 500GB SSD
Only grip is that none of them include screws to fix it onto the motherboard. Had to take one out from the motherboard. So before you buy the screw separately for these, make sure to have a look on your motherboard for what size you need as different motherboards use different sizes. I also have a HP EliteDesk 800 G1 mini which used a bigger size.
My only complaint is that the M.2 card did not come with the screw to fix it to my ASUS motherboard. Due to this, I would recommend checking that the motherboard you plan to install the card has the screw in place (mine didn't) and if not to by a screw kit with a magnetic screwdriver (the screws are really tiny and difficult to get into place).
The internet has a few articles on ADATA swapping out the controllers in the SX8200 Pro with apparently a slower model - and this could explain my speeds, but I haven't figured out how to identify which is which, so take this part with a grain of salt.
CrystalDiskMark x64 results with the NVMe settings:
[Read]
SEQ 1MiB (Q= 8, T= 1): 3021.685 MB/s [ 2881.7 IOPS] < 2434.28 us>
SEQ 128KiB (Q= 32, T= 1): 3078.758 MB/s [ 23489.1 IOPS] < 1319.36 us>
RND 4KiB (Q= 32, T=16): 1363.035 MB/s [ 332772.2 IOPS] < 1489.46 us>
RND 4KiB (Q= 1, T= 1): 69.957 MB/s [ 17079.3 IOPS] < 58.46 us>
[Write]
SEQ 1MiB (Q= 8, T= 1): 2436.534 MB/s [ 2323.7 IOPS] < 3414.58 us>
SEQ 128KiB (Q= 32, T= 1): 2374.058 MB/s [ 18112.6 IOPS] < 1756.08 us>
RND 4KiB (Q= 32, T=16): 1062.997 MB/s [ 259520.8 IOPS] < 1964.70 us>
RND 4KiB (Q= 1, T= 1): 205.643 MB/s [ 50205.8 IOPS] < 19.83 us>
Profile: Default
Test: 1 GiB (x5) [D: 0% (0/768GiB)]
Mode: [Admin]
Time: Measure 5 sec / Interval 5 sec
Date: 2020/12/06 18:13:56
OS: Windows 10 Professional [10.0 Build 19042] (x64)
Temperature during testing peaked at 70 Celsius (with the thin heatsink sheet included with the drive), which seems plenty reasonable.
Then there was the Eureka moment - pop the old drive out of the bay and boot. Now the system booted from the new drive.
Growing the file system to fit on the new drive (new drive > old drive) was trivial - gparted.
Then I had to fix the UUID on the old drive - gparted - trivial apart from you have to have run an fsck before you try. Some frustrating times - but an interesting challenge and all is well in the end.
Transferring a system using Acronis takes a few minutes (unless transferring from a large hard disk when you remember why you need the ssd).
It is a relief to not have to choose what to store on the fastest tier of storage in the system, at least for a while.
It would be helpful if it came with a fixing screw but some motherboards have different size screws. Even my two MSI motherboards have different threads from each other for both standoff and fixing screw. It does come with a heat sink of sorts although I would prefer to use a better one when it is buried underneath a hot graphics card.
Even though I only got the 1TB version this was still a massive steal for my money, I would have got a higher one if I had the money at the time, and I'm considering upgrading my SSD anyway, it's going to be a pain to open it all up but oh well.
Anyway yeah, in conclusion, this is worth the value. I couldn't endorse this any higher, it's the best storage I've ever had. And it's amazing loading into games before I can even snap my fingers.
Also be aware that that the drive is double sided meaning it has components on both sides. This makes it unsuitable for installation in many laptops - like my XPS 13 7390 - which require single sided devices.
In the end I'm returning the drive and replacing it with a Samsung Evo Pro (single sided and hopefully the transfer software will work)
I spent a while checking the web for reviews and recommendations before purchasing this one.
Under speed tests it performs much faster than the stock model and gives a great speed boost. Start-up times for Windows and various apps are snappy.
My only complaint is the the ADATA software doesn't recognise it so I can't check for firmware upgrades but that doesn't affect performance and I'm more than satisfied with this.
The case supplied 5 potential drive options and the mobo supports 2 M.2/MDME drives. I fitted this, easy to fit and once formatted was recognised instantly in Windows 10 - no issues seen.
I'm using this for a drive for some of my Steam games - with all of the hardware mentioned I've never seen games start so quick before.
userbenchmark results - these are the highlights from some of the stats. Its 5 times faster than my Samsung 840 Evo boot drive
Read - 2498
Write - 1596
MIxed - 1366
SusWrite - 1309
377% 1692 Mb/s
Outstanding - 327%
It was easy to install apart from that pesky m.2 screw!
Doing the windows installation was a pain in the backside though! I had to boot into windows from my old ssd then setup the disk that way.
Not as easy as I would have liked but luckily I’m the IT guy so I sorted it in 20/30 mins.
But the quality of this drive wow! Just blown away!
It does run hotter than my older drive (Western Digital Blue SN550 1tb) and looking on HWINFO one drive (listed as drive 3) on the XPG was getting rather hot, above 90 C! But using my boards included heatsink did the trick though and now stays below 60 under heavy sustained load. Not sure if it was a reporting error on HWINFO or something else unusual, but may be worth bearing in mind for those without board heatsinks, as the included black cover/heat spreader in the box doesn't appear to do much except make it look better.
Time will tell on how reliable it is, but so far so good on the speed front.
UserBenchmark rated my SSD set up at 291%
Easy to install and speed tests put it near the top of my expectations. Best upgrade I have made to my PC.
I am using it with this PCIe adapter: https://www.amazon.co.uk/NVME-Adapter-PCIe-6amLifestyle-Support/dp/B07RZZ3TJG
I chose this product over the more expensive Samsung EVO.
Installed in HP OMEN laptop (replacing the poor Toshiba 128 M.2 SSD) - now boot time is approx 3 secs as measure by task manager start up.
Happy with the performance. Too early to comment on reliability.
Anyone experiencing slow speeds likely don't have the correctly spec'ed MOBO to achieve maximum speeds e.g. only a 2 lane M.2 slot, if you have 2 slots on the MOBO usually only one is connected directly to the CPU and this is the one you should use for max speed as the other slot is likely shared lanes and will be considerable slower
Having said that if the Samsung 970 EVO plus had been on sale a few days earlier I would have bought it for basically the same price
Time will tell if it is durable
It made a difference when saving and using files, my PC feels more responsive, well worth the money.
It's quick, insanely quick.
The read and write speeds really are top notch, I've just put a couple of games on it but pretty much instant load times make it worth every penny.
Only wish I'd bought the 1TB version now but that will be the next purchase.
All id say is do you research first to make sure it fits in your MB, but if it does you won't regret it.
The software to use to transfer my data didn't work either so I used a free one that worked great
On the other side, there is probably no reason for you to buy NVME M.2 drive if your PC is anything different from a top spec £2000+ gaming rig or a server machine. Average consumer PC hardware doesn't have enough power to squeeze out all the juice from a high performance NVME, like this ADATA XPG. You're probably better off saving a couple of pounds buying a cheaper 1tb SATA SSD.
I now have an external back-up SSD that is theoretically faster than the other components of my computer system!
I expect that today I could probably buy a 1Tb SSD for the price I paid.......!
was back up and running in less than a hour.
fantastic .
"Be wary when ordering this SSD. Adata have changed the controllers on this to an inferior one, offering reduced performance. Hardware sites originally reviewed the SM2262ENG controller, which has been replaced by the SM2262G controller. You can check this only once you've received the item, because the difference is not advertised."
I purchased this NVME SSD to install into an i5-4670k based computer. Unfortunately the motherboard had no suitable M.2 slot so I had to purchase an adapter (see Sabrent or similar if required)
Overall the speeds of this drive have been fantastic and i've been very happy with this purchase. I've attached a CrystalDiskMark benchmark of the drive.
Do note, this machine is 6.5 years old at this point and so, I have tested and can confirm faster speeds on newer machines.
Toms Hardware has a recent article explaning this.
I've returned my drives because of this lack of transparency.
Honestly compared to my other 2.5in form factor SSD's the extra speed didn't cut load times by that much maybe 1s faster.
Just great to have the thing not take up any drive bays nor extra cabling.
Happy with it and so far so good.
Heat spreader looks cool, no screw included fyi. My mobo had the screw and standoff screw already in place.
Pic attached for speeds.
Will keep review upto update if performance degrades.
Should really tell if I edit video files which I don't.
Windows loads a bit faster than before and for some reason, intel loads windows faster than my current Ryzen 2700x.
Got it at a deal, so I guess from now on I am only buying m2 since on everyday tasks it flies and has no issues on streaming or photo editing.
I still need to test it properly on huge files.
"Be wary when ordering this SSD. Adata have changed the controllers on this to an inferior one, offering reduced performance. Hardware sites originally reviewed the SM2262ENG controller, which has been replaced by the SM2262G controller. You can check this only once you've received the item, because the difference is not advertised."
Temps with an aftermarket generic heatsink on the controller part only (it is highly advised not to use anything on the storage itself) haven't exceeded 50C under load so very pleased.
I purchased this NVME SSD to install into an i5-4670k based computer. Unfortunately the motherboard had no suitable M.2 slot so I had to purchase an adapter (see Sabrent or similar if required)
Overall the speeds of this drive have been fantastic and i've been very happy with this purchase. I've attached a CrystalDiskMark benchmark of the drive.
Do note, this machine is 6.5 years old at this point and so, I have tested and can confirm faster speeds on newer machines.
Industry leading power efficiency.
Silicon Motion SM2262EN Controller.
Less cost.
Plan on swapping out my other Nvme for more of these!






