Отзывы о Корпус Thermaltake The Tower 600 (CA-1Z1-00M6WN-00)
269 отзывов пользователей о Thermaltake The Tower 600 (CA-1Z1-00M6WN-00)
Пользовались
Thermaltake The Tower 600 (CA-1Z1-00M6WN-00)?
Поделитесь своим опытом и помогите другим сделать правильный выбор
Скромный эксперт
27.09.2020
10/10
Оценка пользователя
Великолепно
Custom Water Loop Friendly
Next to my 50 inch tv this chassis is about 1 tv and a half wide. Solid chassis, I own a Core P3 and a Core P5 setting this up was a breeze. This thing weighs alot with the glass, requires 2 person to move when completely setup with all the water and hardware.
Remove the VESA mount plate to make it lighter if you dont plan to wall mount it.
Remove the filter if you are exhausting air out the back.
Plan to buy yourself a new PCIE x16 3.0 riser as they are a one time use. Handling it too much causes the ribbon to break. I use an empty toiler roll to make my bends wide, the riser stoped working after I mover the riser into a different slot. I moved it with enough care as disarming a bomb, still broke. Again I own a P3 and P5 so Ive gone through plenty of these risers from all sellers on Amazon. Have not tried the super expensive riser Thermaltake just came out, the one where it was demostrated that it can be twisted around.
Good quality/craftsmanship. Out of the box I it is a good baseline for case modding. One could actually daisy chain these together!
Remove the VESA mount plate to make it lighter if you dont plan to wall mount it.
Remove the filter if you are exhausting air out the back.
Plan to buy yourself a new PCIE x16 3.0 riser as they are a one time use. Handling it too much causes the ribbon to break. I use an empty toiler roll to make my bends wide, the riser stoped working after I mover the riser into a different slot. I moved it with enough care as disarming a bomb, still broke. Again I own a P3 and P5 so Ive gone through plenty of these risers from all sellers on Amazon. Have not tried the super expensive riser Thermaltake just came out, the one where it was demostrated that it can be twisted around.
Good quality/craftsmanship. Out of the box I it is a good baseline for case modding. One could actually daisy chain these together!
Скромный эксперт
27.09.2020
10/10
Оценка пользователя
Великолепно
Fits itx (easily) and mATX (barely). Best with standard size PSU (not SFF).
**PROS:** nice to looks at, tempered glass; fits standard size PSU and mATX mobo; includes hardware for many different configurations.
**CONS:** seems too big for an itx, but a little bit small for mATX. No mounting hardware for SFF PSU is included.
This will fit a micro ATX (mATX) mobo, but with some overhang, depending on how you mount the board. It fits an itx as well, but an itx mobo will look tiny inside this case... not a bad thing, though, as you'll have tons of space for other stuff. It's easy to mount to the wall if you buy an extra fralt-screen-tv wall mounting bracket like this one:
**CONS:** seems too big for an itx, but a little bit small for mATX. No mounting hardware for SFF PSU is included.
This will fit a micro ATX (mATX) mobo, but with some overhang, depending on how you mount the board. It fits an itx as well, but an itx mobo will look tiny inside this case... not a bad thing, though, as you'll have tons of space for other stuff. It's easy to mount to the wall if you buy an extra fralt-screen-tv wall mounting bracket like this one:
Скромный эксперт
27.09.2020
2/10
Оценка пользователя
Ужасно
Beautiful design, Horrible everything.
Horrible case. Made of cheap steel and plastic. Was really hoping I would love this case but it is really built strictly for looks. Much better cases on the market for the same money. Also their manual doesn't share any information on some of the brackets. Not sure what Thermaltake was thinking on this.
Скромный эксперт
27.09.2020
10/10
Оценка пользователя
Великолепно
Unique, functional & great build quality - Happy Customer :)
Been building PCs for many years, been awhile since I built in a case that truly felt unique without just being gimicky. The quality is top and despite looking difficult to work with, it's actually easier than many traditional cases. Thermaltake really did well with this case.
Build Specs:
Thermaltake P3 T6
Asus Maximus IX Formula (Front panel 3.0 header doesn't fit next to my x62 rad. I don't blame the case for this, due to unusual position on the board)
7700K
NZXT X62
Asus 1080TI Strix (The GPU length maximum is only required in the (traditional) horizontal configuration. Placing it vertical with the included riser causes no issue with my 11.73" card and push 240mm rad)
4x SSD (double side tape two of them together in the bottom slot below rad, two in the designated bays)
Total build weight for wall mount: 41lbs.
Build Specs:
Thermaltake P3 T6
Asus Maximus IX Formula (Front panel 3.0 header doesn't fit next to my x62 rad. I don't blame the case for this, due to unusual position on the board)
7700K
NZXT X62
Asus 1080TI Strix (The GPU length maximum is only required in the (traditional) horizontal configuration. Placing it vertical with the included riser causes no issue with my 11.73" card and push 240mm rad)
4x SSD (double side tape two of them together in the bottom slot below rad, two in the designated bays)
Total build weight for wall mount: 41lbs.
Скромный эксперт
27.09.2020
2/10
Оценка пользователя
Ужасно
Awesome looking case
The case looks awesome, especially if your rig is decked with RGB. The quality, not so much My case stand had some defects where the screws they used were too long and protrudes pass the plastic, scratching the crap out of my case when I was putting it back together. The paints on my P3 Red is cheap, very cheap, any kind of scuffle will result in the paint chipping and falling off. The instructions, well, might as well not any. It doesn't tell you what screw size to use where, just tell you to "Lay the case down and put the motherboard on". Thanks thermaltake.
Even though the P3 can fit an ATX motherboard, I wouldnt recommend it if you have a radiator mounting to the right, it will block the SATA connector slots.
Overall, this is just not a case that's worth the price.
Even though the P3 can fit an ATX motherboard, I wouldnt recommend it if you have a radiator mounting to the right, it will block the SATA connector slots.
Overall, this is just not a case that's worth the price.
Скромный эксперт
27.09.2020
8/10
Оценка пользователя
Хорошо
Interesting case!
So I decided on this case, was kinda of tired of worrying about postive/negative fan pressure, I just wanted something I could "display" with as well. My previous case was a Corsair Vengeance C70 which is coincidentally nearly the same dimensions.
This is well built and nothing feels cheap about it. The metal rods that hold the glass have some serious weight to them. The case provides tons of flexibility for your components. Hiding wires was an absolute breeze as well. The included hardware such as screws and mother board risers werent great. The risers that came with it threaded into the case just fine but I could not get any of the included board screws to thread into the risers. The pitch seemed different but I cannot confirm that. I ended up using some hardware I had laying around for motherboard support. There is a bracket that holds the power supply and it did not seem to fit my thermaltake Smart RBG 850w but I was able to simply flip the bracket and make most of it work. So instead of the bracket fitting around the PSU the PSU just gets bolted to the bracket. Support wise its 100% fine I just could not tell if it was a design intention or flaw. It worked out fine though.
This is a build in progress and I dont have any fear that components I get later will have any issues. I almost wish I had gotten the corner version of this (p90?).
This is well built and nothing feels cheap about it. The metal rods that hold the glass have some serious weight to them. The case provides tons of flexibility for your components. Hiding wires was an absolute breeze as well. The included hardware such as screws and mother board risers werent great. The risers that came with it threaded into the case just fine but I could not get any of the included board screws to thread into the risers. The pitch seemed different but I cannot confirm that. I ended up using some hardware I had laying around for motherboard support. There is a bracket that holds the power supply and it did not seem to fit my thermaltake Smart RBG 850w but I was able to simply flip the bracket and make most of it work. So instead of the bracket fitting around the PSU the PSU just gets bolted to the bracket. Support wise its 100% fine I just could not tell if it was a design intention or flaw. It worked out fine though.
This is a build in progress and I dont have any fear that components I get later will have any issues. I almost wish I had gotten the corner version of this (p90?).
Скромный эксперт
27.09.2020
8/10
Оценка пользователя
Хорошо
EXPENSIVE BUT SICK CASE
Went for the AH T600 Helicopter chassis.
I am speechless at how sick it is! Even my buddies a d family members can't stop looking at it LOL!
Man oh man where do I start, okay so just to get this out there, this thing is HEAVY. But that's also because I have a lot of stuff in my gaming rig BUT even without it this thing will make you flex them muscles. So have a friend with you to lift it. Because when I did it alone, I found it difficult moving this monster around.
Also do note that both sides have glass panels on them, so be prepared for some cable ties, velcros, cable sleeves, and some cable management skills. Oh and patience!
It's also very spacious inside, as long as you plan your rig ahead with the measurements. It comes with a vertical GPU mount but not the PCIe cable, you need to buy that separately.
I didn't put a dust filter in this so within a month of running it everyday for atleast 5hrs. Of gaming, a started to notice dust buildup. If you don't mind some dustinf here and there, then that should be fine. Gaming rigs are meant to be taken care of anyways.
It also comes with a lot of hardware screws for almost everything that you wanna put in it.
It sure is pricey and a tad bit overkill for a pc chassis but hey, if you have the budget to splurge then might as well get this case.
I am speechless at how sick it is! Even my buddies a d family members can't stop looking at it LOL!
Man oh man where do I start, okay so just to get this out there, this thing is HEAVY. But that's also because I have a lot of stuff in my gaming rig BUT even without it this thing will make you flex them muscles. So have a friend with you to lift it. Because when I did it alone, I found it difficult moving this monster around.
Also do note that both sides have glass panels on them, so be prepared for some cable ties, velcros, cable sleeves, and some cable management skills. Oh and patience!
It's also very spacious inside, as long as you plan your rig ahead with the measurements. It comes with a vertical GPU mount but not the PCIe cable, you need to buy that separately.
I didn't put a dust filter in this so within a month of running it everyday for atleast 5hrs. Of gaming, a started to notice dust buildup. If you don't mind some dustinf here and there, then that should be fine. Gaming rigs are meant to be taken care of anyways.
It also comes with a lot of hardware screws for almost everything that you wanna put in it.
It sure is pricey and a tad bit overkill for a pc chassis but hey, if you have the budget to splurge then might as well get this case.
Скромный эксперт
27.09.2020
8/10
Оценка пользователя
Хорошо
Fantastic case, would get 5 stars but I had a prob. w/ mine
Beautiful case, easy to put together and the quality of the actual build is insane. This case is amazing for water cooling and putting all your stuff on display. Mounting everything couldn't be simpler. I did have a single problem with this case, though; the VESA mount adapter would not come off with ease. In further detail, the VESA mount thing is attached to the back of the case behind the motherboard by 6 screws. I didn't plan on using the mount and wanted the extra space for cable management so I tried taking it off. I got 5 screws out before getting to the last one, which didn't want to come out. I tried and tried to get the screw out but in the end my screwdriver was stronger than the screw so it ended up stripping the teeth on the screw. I had to use a drill and drill out the screw very carefully as to not scratch my brand new case. I got lucky as the drill bit dug into the screw and ended up unscrewing the screw for me. I wish I didn't have this hiccup as that took off a star in my case. Aside from that, this is a fantastic case that I love having on top of my desk. Also a tip for anyone considering this case: put the GPU AND THE BRACKET on before you install your power supply, as there are screws that are just easier to get to without a power supply in the way.
Скромный эксперт
27.09.2020
10/10
Оценка пользователя
Великолепно
Excellent VR Gaming Machine!
First of all, I was very impressed with how the machine was packaged. I don't believe any of the "gorillas" that work at any of the shipping companies could damage it during shipping. (The quality of the packaging was evidenced by no leaks in the liquid cooling system.)
Setup was easy: All I had to do is connect it to my 2K monitor, 4K Samsung curved TV, Oculus Rift S headset, keyboard and mouse, WiFi antenna, and power cable.
The VR experience was life-changing, and the machine had no problem playing Fallout 4 VR.
I am a Comp TIA A+ Certified Professional (Computer Technician) and have been working with computers since 1984. So, I can build my own gaming PC. However, when I priced out the parts for this machine, the cost was about $300 more than the price of the machine.
A machine with the exact same specs is being offered on eBay for a price of around $2,900.
No brainer: I opted to buy this pre-built machine, instead of building on, and I am glad I did!
Please note that the machine I received had different components than pictured in the listing photo (MOBO, GPU, SSD, etc.). But, after careful checking, I determined that all of the components had either the same or better specs.
This is a strong indication that the company that builds these machines, and sells them, is a quality company.
I highly recommend this machine for anyone who wants to dive into the VR universe. The quality is excellent and the price represents a good value.
Just be warned: Your life will never be the same again!!!
Setup was easy: All I had to do is connect it to my 2K monitor, 4K Samsung curved TV, Oculus Rift S headset, keyboard and mouse, WiFi antenna, and power cable.
The VR experience was life-changing, and the machine had no problem playing Fallout 4 VR.
I am a Comp TIA A+ Certified Professional (Computer Technician) and have been working with computers since 1984. So, I can build my own gaming PC. However, when I priced out the parts for this machine, the cost was about $300 more than the price of the machine.
A machine with the exact same specs is being offered on eBay for a price of around $2,900.
No brainer: I opted to buy this pre-built machine, instead of building on, and I am glad I did!
Please note that the machine I received had different components than pictured in the listing photo (MOBO, GPU, SSD, etc.). But, after careful checking, I determined that all of the components had either the same or better specs.
This is a strong indication that the company that builds these machines, and sells them, is a quality company.
I highly recommend this machine for anyone who wants to dive into the VR universe. The quality is excellent and the price represents a good value.
Just be warned: Your life will never be the same again!!!
Скромный эксперт
27.09.2020
10/10
Оценка пользователя
Великолепно
So sexy. This thing is art
Incredible case. Its huge... but perfect for building a work of art.
Скромный эксперт
27.09.2020
8/10
Оценка пользователя
Хорошо
A great case if you know you want something like it. Definitely not a traditional ATX case.
A great case if you know you want something like it. Definitely not a traditional ATX case, but yet not 'out there' like some others.
I wanted a case that you could see the inside easily -- well, you probably aren't going to find anything that does this better than the P3 (or it's bigger siblings). While I wanted an open, non-traditional case … I wasn’t interested in some of the crazier designs. This is still a PC, and not an art installation (for me).
This case overall is a great open design. It lets you secure everything in place far better than just leaving your PC parts scattered on the table, and yes, I have firsthand comparisons to drawn on. It's not perfect by any stretch, but as far as compromises go, none of them made me second guess the decision to go with this case. As I only have M.2 storage mounted directly to my motherboard, I didn't use any of the 2.5 SSD or 3.5 HDD mounts, so I can't really comment on those, but they seem reasonable and effective.
The case certainly is not for everyone. I’m sure most people will want something that protects the innards a little more thoroughly. I only have one major issue with this case, but since this design is a couple of years old, it’s not a surprising one. That issue is the lack of a front panel USB-C connector. I almost didn’t buy this case for that one reason. However, my motherboard has an IO panel USB-C jack, so I decided to go ahead and order this one.
A couple of things to keep in mind with this case though – 1. You will want to use a 360/420mm long radiator, don’t bother with air cooling. 2. You will want a motherboard with an integrated IO panel cover/labeling. There is no provision for mounting a traditional separate ATX IO panel cover.
Pros:
- Puts your fancy-glowy PC parts that you spent a bunch of money on front and center.
- Easy to work on, it has no 'sides' per-se, so nothing blocks access when putting everything together. I didn't even cut myself once, I'm pretty sure that is a first
- Solidly built
- Not super expensive
- Supports radiators.
- Thick tempered glass ‘cover’
Cons:
- If you aren’t using a radiator/water cooling. While there is no technical reason you can’t air cool, doing so means you are leaving an entire 1/3 of the ‘case’ unused. Cosmetically, this just isn’t going to look great, and just leaves you with an unnecessarily oversized case.
- Why-why-why can’t we have gromets on all the wire pass-throughs. Seriously?
- Some tabs/tie-down lugs on the ‘inside’ would be a huge help for securing wires. While it’s not too bad, as there are places to tie down to, more options would be very helpful.
- Well, it is open, so hopefully you don’t have problems with conductive foreign objects, nor small sticky-fingered children.
- A place to mount a small-ish fan to point at the VRM would be helpful.
- No way to mount a traditional ATX style IO panel cover.
Major Con:
- There is one major downside here – that is the lack of a USB 3.1 gen 2/USB-C connector on the front panel array. I think however that I may be able to replace one of the USB 3.0 cables with a replacement to solve this.
I wanted a case that you could see the inside easily -- well, you probably aren't going to find anything that does this better than the P3 (or it's bigger siblings). While I wanted an open, non-traditional case … I wasn’t interested in some of the crazier designs. This is still a PC, and not an art installation (for me).
This case overall is a great open design. It lets you secure everything in place far better than just leaving your PC parts scattered on the table, and yes, I have firsthand comparisons to drawn on. It's not perfect by any stretch, but as far as compromises go, none of them made me second guess the decision to go with this case. As I only have M.2 storage mounted directly to my motherboard, I didn't use any of the 2.5 SSD or 3.5 HDD mounts, so I can't really comment on those, but they seem reasonable and effective.
The case certainly is not for everyone. I’m sure most people will want something that protects the innards a little more thoroughly. I only have one major issue with this case, but since this design is a couple of years old, it’s not a surprising one. That issue is the lack of a front panel USB-C connector. I almost didn’t buy this case for that one reason. However, my motherboard has an IO panel USB-C jack, so I decided to go ahead and order this one.
A couple of things to keep in mind with this case though – 1. You will want to use a 360/420mm long radiator, don’t bother with air cooling. 2. You will want a motherboard with an integrated IO panel cover/labeling. There is no provision for mounting a traditional separate ATX IO panel cover.
Pros:
- Puts your fancy-glowy PC parts that you spent a bunch of money on front and center.
- Easy to work on, it has no 'sides' per-se, so nothing blocks access when putting everything together. I didn't even cut myself once, I'm pretty sure that is a first
- Solidly built
- Not super expensive
- Supports radiators.
- Thick tempered glass ‘cover’
Cons:
- If you aren’t using a radiator/water cooling. While there is no technical reason you can’t air cool, doing so means you are leaving an entire 1/3 of the ‘case’ unused. Cosmetically, this just isn’t going to look great, and just leaves you with an unnecessarily oversized case.
- Why-why-why can’t we have gromets on all the wire pass-throughs. Seriously?
- Some tabs/tie-down lugs on the ‘inside’ would be a huge help for securing wires. While it’s not too bad, as there are places to tie down to, more options would be very helpful.
- Well, it is open, so hopefully you don’t have problems with conductive foreign objects, nor small sticky-fingered children.
- A place to mount a small-ish fan to point at the VRM would be helpful.
- No way to mount a traditional ATX style IO panel cover.
Major Con:
- There is one major downside here – that is the lack of a USB 3.1 gen 2/USB-C connector on the front panel array. I think however that I may be able to replace one of the USB 3.0 cables with a replacement to solve this.
Piotr M.
20.12.2020
8/10
Оценка пользователя
Хорошо
Das einzige Gehäuse welches man an die Wand hängen kann.
Ich habe lange nach einer Wandhalterung für PC Gehäuse gesucht die nach was aussehen und bin auf dieses Gehäuse gestoßen. Da hat mich das fieber gepackt und ich baute mir ein neues System. Das einzige dumme ist das nur ein 360mm Radi passt für ein Ryzen 3900x und RTX 2080ti nicht ausreichend also experimentierte ich rum und Montierete noch ein 360mm vorne hin. Jetzt bleibt mein System kühl und ich hab Platz auf dem Tisch und der PC verstaubt nicht unterm Tisch. So ein Prachtstück muss man ja zeigen. Das Gehäuse an sich ist Qualitativ ok es gibt aber deutlich bessere wie NZXT oder Lian Li. Aktuelle USB 3.2 Ports wären auch nicht schlecht.
Friedrich
20.12.2020
10/10
Оценка пользователя
Великолепно
Gutes Open-Case das kaum Wünsche offen lässt
Lässt kaum Wünsche offen, einzig die Positionen der SSD- Befestigungspunkte ( hinter den Luftschlitzen der Kühlung sind/waren für mich störend, da ich dort einen 2ten Radiator nebst Kühlung verbaut habe. Rechts neben dem Halter für die Wandmontage wäre genug Platz für selbige gewesen. Ansonsten super zufrieden, Löcher dort wo man sie wirklich braucht, Kabelmanagement gut gelöst, es sind dort Stege, wo man auch letztlich mit den Kabeln lang läuft, Klebe-Sockel rein, glücklich sein.
Zusammenbau super easy und selbsterklärend, zusammen mit dem TT- RL360 LC-Packet richtiger Eye-catcher !
Zusammenbau super easy und selbsterklärend, zusammen mit dem TT- RL360 LC-Packet richtiger Eye-catcher !
David
20.12.2020
10/10
Оценка пользователя
Великолепно
Custom Build
An excellent case for custom builds. The quality of the case is really good, the tempered glass looks really nice and the case has a lot of space for cable management in the back. A riser cable is include with the case, so mounting a GPU in a vertical position can be done out of the box. Awesome case!
YouTAG
20.12.2020
10/10
Оценка пользователя
Великолепно
Thermaltake core p3
Eins der besten Gehäuse
Ist schnell angekommen und alles gut perfekt top Produkt
Ist schnell angekommen und alles gut perfekt top Produkt
Mara
20.12.2020
10/10
Оценка пользователя
Великолепно
Schönes edles PC Gehäuse
Die Qualität ist sehr gut, sehr stabiles Glasspanel.
Ioannis Natsis
20.12.2020
10/10
Оценка пользователя
Великолепно
Gut
Gut
Alex
20.12.2020
10/10
Оценка пользователя
Великолепно
This is a great case but you really have to think through building it. I've built a ton of computers over the years and this was the most difficult to build in because of the assembly of the case itself. If you have the patience then don't let it out you off. But be prepared to take bits off, turn it round the stick it back on again. The end result is great if you have the right components to show off, but been an open air design be prepared for dust. However seen as the components are so easy to access, a quick dust off every day takes 30 seconds. I do recommend this case if you want something different. But you can get something like the Phanteks p600s for around the same price which offers do much more for the money. All depends on what you want really, this will definitely make your PC stand out.
Eli O.
20.12.2020
10/10
Оценка пользователя
Великолепно
This case comes with its own perks, its unique and the cost represents that. But if your willing to buy it, then I can confirm it will make up for every penny.
I really love my case, I always wanted quirky one, and the fact it was wall-mountable is even better. Saves on on desk/under desk space. For me it was really well worth it as I was aiming for a white base build with room for expansion in future.
It is part of a self built gaming & heavy duty college work computer with;
AMD Ryzen 5 3600 Processor, EVGA WHITE 500W Power Supply, ASUS Prime B450-PLUS ATX Motherboard, Crucial P1 1 TB CT1000P1SSD8, Corsair Vengeance RGB PRO 16 GB.
I really love my case, I always wanted quirky one, and the fact it was wall-mountable is even better. Saves on on desk/under desk space. For me it was really well worth it as I was aiming for a white base build with room for expansion in future.
It is part of a self built gaming & heavy duty college work computer with;
AMD Ryzen 5 3600 Processor, EVGA WHITE 500W Power Supply, ASUS Prime B450-PLUS ATX Motherboard, Crucial P1 1 TB CT1000P1SSD8, Corsair Vengeance RGB PRO 16 GB.
Harvey
20.12.2020
4/10
Оценка пользователя
Ужасно
The case is not too hard to build in but the back pannel is a pain to remove and re fit. Assembly instructions are just plain bad and the included Motherboard moutning screws snap off easilly so i had to use my old ones after i broke 3 of the indluded ones. The PCIE riser is not fit for use for anything, If the PCIE bus experiences any any moderate or significant use the application running will just crash because the riser is of the upmost inadequacy and can not handle anything slightly intensive. It is un acceptable to include such a flawed component for a case which is part of one of its most marketed features which is the alternative GPU mounting position.
The case looks nice but its not great to build in and i would not recomend it to any one who does not have significant experience and willingness to buy extra parts e.g new PCIE riser and Motherboard mounting screws.
The case looks nice but its not great to build in and i would not recomend it to any one who does not have significant experience and willingness to buy extra parts e.g new PCIE riser and Motherboard mounting screws.
J.E.C.H
20.12.2020
10/10
Оценка пользователя
Великолепно
Instructions are poor but otherwise this case is amazing. Very Good Build Quality and Design. Doesn't come with TV mount but I got one off amazon and it worked perfectly. If you mount your gpu to the very end it's to close to glass and temps will suffer badly I found moving it back one slot completely fixed the issue. I can easily recommend this case.
Dal
20.12.2020
10/10
Оценка пользователя
Великолепно
I wall hung this case and it looks great. Really happy with everything. I'm extra happy I went with the glass (although I'm not sure if that's standard now or not). Quality of parts have a very high standard and the configuration options are really thought out. I have a beefy Noctua NH-D15 which fits fin (and I had to raise a fan about an inch as the IO section was in the way on my mobo).
Dan t
20.12.2020
6/10
Оценка пользователя
Плохо
Visually it is stunning. However the instructions for the screw placments and configurations are not clear. And there is a massive flaw in the pcie riser as others have complained. Using this will severly limit your gpu performance.
For the price its reasonable however the pcie slot bracket is machined very poorly.
For the price its reasonable however the pcie slot bracket is machined very poorly.
Manon Theoutside
20.12.2020
10/10
Оценка пользователя
Великолепно
Amazing statement case that is fully functional and expandable. Really easy to build in.The included PCIE Riser and bracket is a real bonus. The Tempered glass instead of Perspex is a must if you can afford the extra it adds a level of finesse to an already stunning case. Its Big, Its heavy its STUNNING. Buy it now.
Like if helpfully
20.12.2020
8/10
Оценка пользователя
Хорошо
The case itself is a bit of a LEGO go job to set up found a YouTube video very helpful
only problem was mine arrived with a big scratch gone across the glass panel
only problem was mine arrived with a big scratch gone across the glass panel
A.Baker
20.12.2020
10/10
Оценка пользователя
Великолепно
Great case however assembly and installing your parts can be a real ball ache, I had to keep removing parts to fit other parts.
Dean Gornall
20.12.2020
10/10
Оценка пользователя
Великолепно
Really good solid case. Looks amazing with water cooling and RGB lighting.
Amazon Customer
20.12.2020
10/10
Оценка пользователя
Великолепно
Excellent show off case. Very sturdy and for the most part easy to assemble, only downside is the weight, very heavy
squalls
20.12.2020
8/10
Оценка пользователя
Хорошо
Bonjour,
Acheter pour ma config coup de folie a base de ryzen 7 3700x+ 2080 ti ...
Plusieurs points sont important avant l'achat d'un tel boitier je pense.
!!!Boitier ouvert !!!
Point positif et négatif en même temps je m'explique !
En positif 😍😍😍
-On a évidement la température des composants, ma config est dans une petite pièce mais j'ai quasi perdu 10 degrés sur le processeur par exemple...
-Une vitre, j'ai lus sur certain site que c'étais du plexi, non c'est bien une vitre assez épaisse d'ailleurs.
-Le silence ! et oui on penserai l'inverse car les composants sont a l'air libre mais comme sa chauffe moins, les ventilos tournent moins (voir pas du tous pour ma 2080 ti en semi passif) et aussi a noté qu'il y a les ventillos du boitier en moins, pour ma config du coup je l'ai que les 2 du watercooling + ceux de l' alim et gpu ...
-De la place pour bosser !!😍😍👍👍👍 je ne parlerai pas du montage du boitier en lui même pour le moment, mais une fois monter c est un vrai plaisir d'installer les composants !
-Possibilité de l'accrocher au mur, tel un tableau l'idée est super (par contre a voir pour le flux d'air ...le flux du watercooling passe par le boitier et donc le mettre coller contre un mur est pas une bonne idée a moins de laisser un espace).
-Aucun problème pour le riser de mon coté, j'ai l'impression quant je regarde la notice qu'il ont dû changer leur modèle...pour le moment RAS mais je le signalerai si soucis .
En négatif. 😖😖
Boitier ouvert = poussière mais franchement si vous l'installer pas dans un garage c est très largement gérable (un coup de bombe poussière par mois suffit).
Le montage du boitier en lui même, inutile de redire ce qui a été dis, perso j'ai regarder une video sur youtube plutot que d'essayer de piger la notice.
J'ai trouver la peinture un poil fragile, rien d’alarmant mais a signaler .
Bref beau boitier ultra original, parfait pour du watercooling custom j'ai préférer perso le watercooling aorus AIO mirage ou il y a un écran LCD sur la pompe.
😀😀😀En espérant avoir été utile merci de me le faire savoir .😀😀😀
Acheter pour ma config coup de folie a base de ryzen 7 3700x+ 2080 ti ...
Plusieurs points sont important avant l'achat d'un tel boitier je pense.
!!!Boitier ouvert !!!
Point positif et négatif en même temps je m'explique !
En positif 😍😍😍
-On a évidement la température des composants, ma config est dans une petite pièce mais j'ai quasi perdu 10 degrés sur le processeur par exemple...
-Une vitre, j'ai lus sur certain site que c'étais du plexi, non c'est bien une vitre assez épaisse d'ailleurs.
-Le silence ! et oui on penserai l'inverse car les composants sont a l'air libre mais comme sa chauffe moins, les ventilos tournent moins (voir pas du tous pour ma 2080 ti en semi passif) et aussi a noté qu'il y a les ventillos du boitier en moins, pour ma config du coup je l'ai que les 2 du watercooling + ceux de l' alim et gpu ...
-De la place pour bosser !!😍😍👍👍👍 je ne parlerai pas du montage du boitier en lui même pour le moment, mais une fois monter c est un vrai plaisir d'installer les composants !
-Possibilité de l'accrocher au mur, tel un tableau l'idée est super (par contre a voir pour le flux d'air ...le flux du watercooling passe par le boitier et donc le mettre coller contre un mur est pas une bonne idée a moins de laisser un espace).
-Aucun problème pour le riser de mon coté, j'ai l'impression quant je regarde la notice qu'il ont dû changer leur modèle...pour le moment RAS mais je le signalerai si soucis .
En négatif. 😖😖
Boitier ouvert = poussière mais franchement si vous l'installer pas dans un garage c est très largement gérable (un coup de bombe poussière par mois suffit).
Le montage du boitier en lui même, inutile de redire ce qui a été dis, perso j'ai regarder une video sur youtube plutot que d'essayer de piger la notice.
J'ai trouver la peinture un poil fragile, rien d’alarmant mais a signaler .
Bref beau boitier ultra original, parfait pour du watercooling custom j'ai préférer perso le watercooling aorus AIO mirage ou il y a un écran LCD sur la pompe.
😀😀😀En espérant avoir été utile merci de me le faire savoir .😀😀😀
James Carron
20.12.2020
10/10
Оценка пользователя
Великолепно
Yes
Mr K.
20.12.2020
10/10
Оценка пользователя
Великолепно
Brilliant case at a great price. Comes with a tempered glass as well.
B.H.Gobochul
20.12.2020
10/10
Оценка пользователя
Великолепно
Great design, looks fantastic.
Slightly tricky to assemble, so not recommended for a novice, but definitely no cooling problems with this one, even in summer with an ambient temp of around 30c !
Slightly tricky to assemble, so not recommended for a novice, but definitely no cooling problems with this one, even in summer with an ambient temp of around 30c !
chris
20.12.2020
10/10
Оценка пользователя
Великолепно
Rock solid and easy to build, upgrade, and cool. It also looks pretty swish
Tristan Kennedy
20.12.2020
4/10
Оценка пользователя
Ужасно
Doesn't come with wall mounting bracket and instructions are hard to read
Owais minhas
20.12.2020
10/10
Оценка пользователя
Великолепно
Looks amazing and easy to build in
Mr M Smith
20.12.2020
8/10
Оценка пользователя
Хорошо
Cable management a bit of a pain, other than that, all good
Eduardo Breschi
20.12.2020
10/10
Оценка пользователя
Великолепно
Perfect
Antonio Tron
20.12.2020
10/10
Оценка пользователя
Великолепно
Prodotto impeccabile!ottimo materiali e precisione di costruzione.
Nella confezione c’è tutto e di più, facile da montare ed è abbastanza versatile.
-Vetro resistente è bello da vedere.
Ingressi USB ottimi, pulsanti dal suono piacevole.
-Possibilità di istallazione hdd e ssd sufficiente per qualsiasi utente.
NON consiglio per chi avesse sistema LIQUIDO di installare ssd nei suoi alloggiamenti perché blocca la estromissione di aria calda dal radiatore.
-Parlando dell’alimentatore/ cavi CONSIGLIO Alimentatori MODULARI per il semplice fatto che hanno cavi di alimentazione mobo più lunghi, cosicché si abbia la possibilità di scegliere se mettere ALI verticale, orizzontale ventola su o ventola giù.
-Scheda video in orizzontale: tenere conto che le temperature sono superiori e di NON posizionarla troppo vicino al vetro, NO RICIRCOLO giusto di aria. LA MIGLIO COSA sarebbe posizionarla sulla Mobo, le ventole aspirano dalla parte anteriore e buttano aria calda parte posteriore.IL CALORE SI ESPANDE IN VERTIVALE.
TENERE CONTO DELLA RUMOROSITÀ essendo Case Aperto.
Mi ritengo pienamente soddisfatto del prodotto, lo consiglio! Thermaltake lavora bene!
Nella confezione c’è tutto e di più, facile da montare ed è abbastanza versatile.
-Vetro resistente è bello da vedere.
Ingressi USB ottimi, pulsanti dal suono piacevole.
-Possibilità di istallazione hdd e ssd sufficiente per qualsiasi utente.
NON consiglio per chi avesse sistema LIQUIDO di installare ssd nei suoi alloggiamenti perché blocca la estromissione di aria calda dal radiatore.
-Parlando dell’alimentatore/ cavi CONSIGLIO Alimentatori MODULARI per il semplice fatto che hanno cavi di alimentazione mobo più lunghi, cosicché si abbia la possibilità di scegliere se mettere ALI verticale, orizzontale ventola su o ventola giù.
-Scheda video in orizzontale: tenere conto che le temperature sono superiori e di NON posizionarla troppo vicino al vetro, NO RICIRCOLO giusto di aria. LA MIGLIO COSA sarebbe posizionarla sulla Mobo, le ventole aspirano dalla parte anteriore e buttano aria calda parte posteriore.IL CALORE SI ESPANDE IN VERTIVALE.
TENERE CONTO DELLA RUMOROSITÀ essendo Case Aperto.
Mi ritengo pienamente soddisfatto del prodotto, lo consiglio! Thermaltake lavora bene!
davide
20.12.2020
10/10
Оценка пользователя
Великолепно
Ha tutto quello che occorre per un case open. Viti sostegni e gommini di tutti i tipi. Facile da montare e tutto si unisce alla perfezione, robusto solido e ben costruito.
Cecilia
20.12.2020
10/10
Оценка пользователя
Великолепно
Tutto come descrizione,imballo OK ben protetto.
Tutto bene,il cavo riser funziona (VGA in vericale e ho guadanato 6-7°C in meno).
L'intercapedine ben contiene tutti i cavi e fili.
La cosa un po fastidiosa è il manuale;elenca la miriade di viti di varie dimensioni e tipologia
con le quantità, ma poi negli schemi di montaggio delle varie parti del case,indica le figure delle viti
dove vanno, ma non QUALI viti; io ho avanzato molte viti e gomini vari...
Addirittura quando c'è da mettere il vetro frontale,il manuale non illustra che nei fori c'è da mettere (ovviamente) i gommini specifici,sennò si rischia di rimpere il vetro nel montaggio!!
P.S. io ho due SSD e un HD (tot=3 periferiche) ;non c'è posto per la 3° periferica (SSD che ho messo nell'intercapedine solo appoggiato,non sul rack)
Tutto bene,il cavo riser funziona (VGA in vericale e ho guadanato 6-7°C in meno).
L'intercapedine ben contiene tutti i cavi e fili.
La cosa un po fastidiosa è il manuale;elenca la miriade di viti di varie dimensioni e tipologia
con le quantità, ma poi negli schemi di montaggio delle varie parti del case,indica le figure delle viti
dove vanno, ma non QUALI viti; io ho avanzato molte viti e gomini vari...
Addirittura quando c'è da mettere il vetro frontale,il manuale non illustra che nei fori c'è da mettere (ovviamente) i gommini specifici,sennò si rischia di rimpere il vetro nel montaggio!!
P.S. io ho due SSD e un HD (tot=3 periferiche) ;non c'è posto per la 3° periferica (SSD che ho messo nell'intercapedine solo appoggiato,non sul rack)
Francisco
20.12.2020
10/10
Оценка пользователя
Великолепно
Si buscas algo distinto a las cajas más habituales, esta es una gran opción. Me ha gustado la facilidad del montaje, la versatilidad y la calidad. Un punto negativo: el cable riser que incluye para poder montar la tarjeta gráfica en horizontal no está a la altura de calidad del resto de la caja, he tenido que usar un truco casero, encontrado por Internet, para que funcionará (recubrirlo de papel plata).
Jesus Molina
20.12.2020
10/10
Оценка пользователя
Великолепно
Después de ver vídeos y vídeos acerca de esta caja, decidí comprarla, y no ha defraudado.
Compatible con radiadores de 360mm y graficas de buen tamaño, yo tengo una Shappire VEGA 64.
Te da multitud de opciones de instalación, como situarla en vertical o en horizontal, colgarla en una pared con el soporte.... como tu prefieras.
También incluye adaptadores para situar la tarjeta gráfica fuera de la placa base, lo que reduce la temperatura de esta última.
Incluye todos los adaptadores necesarios para los distintos tipos de montajes.
En la parte interna, tenemos 3 espacios para SSD + 2 espacios para Discos duros 3,5", guías de cables, y un filtro de polvo para la rejilla lateral.
Es un modelo que deja a la vista la placa base y prácticamente todos los componentes, salvo los HDD que los esconde en la parte lateral. Con esto garantizamos un airflow increíble para la tarjeta gráfica y la refrigeración de la CPU.
La instalación es fácil, pero has de seguir el manual, que está en castellano.
Es de un tamaño grande.
Recomendada la compra.
Compatible con radiadores de 360mm y graficas de buen tamaño, yo tengo una Shappire VEGA 64.
Te da multitud de opciones de instalación, como situarla en vertical o en horizontal, colgarla en una pared con el soporte.... como tu prefieras.
También incluye adaptadores para situar la tarjeta gráfica fuera de la placa base, lo que reduce la temperatura de esta última.
Incluye todos los adaptadores necesarios para los distintos tipos de montajes.
En la parte interna, tenemos 3 espacios para SSD + 2 espacios para Discos duros 3,5", guías de cables, y un filtro de polvo para la rejilla lateral.
Es un modelo que deja a la vista la placa base y prácticamente todos los componentes, salvo los HDD que los esconde en la parte lateral. Con esto garantizamos un airflow increíble para la tarjeta gráfica y la refrigeración de la CPU.
La instalación es fácil, pero has de seguir el manual, que está en castellano.
Es de un tamaño grande.
Recomendada la compra.
Dragone81
20.12.2020
8/10
Оценка пользователя
Хорошо
Il case è particolare ma molto ben fatto, è fatto per essere personalizzato e si riesce a montare praticamente qualsiasi hardware, il montaggio per la scheda video verticale è ben fatto ma.... non funziona... o meglio sulle nuove rx5700 con mobo x570 con pcie 4.0 non funziona, del resto loro lo dicono nelle specifiche che supporta pcie 3.0, in rete però a molti non funziona è un pò un terno al lotto, avrei preferito pagarlo qualcosa meno senza il riser verticale.
Guillermo Rosales
20.12.2020
6/10
Оценка пользователя
Плохо
El cable riser no vino incluido , cosa que si trae este modelo .. seria cosa de thermaltake en la fabrica , excelente por donde la mires ! toca armar muchas cosas , asi que armate de paciencia , el manual no viene en español pero no hace falta ! con las fotos y sentido comun la armas ... me toco regresarla ya que por no tener el cable riser .... cuando tenia el disipador del cpu stock todo perfecto , pero al colocar la refrigeracion liquida .. mi grafica al ser muy grande pegaba con ella .... ( con la liquida ) y no pedi reemplazo porque mi grafica es de 3 slots de pci express y probe colocarla y queda torcida
PleGue
20.12.2020
10/10
Оценка пользователя
Великолепно
Espectacular. Un chasis robusto, de buenos materiales y bien acabado. La distribución da mucho juego y es ideal si tienes intención de montar una Refri custom. La gráfica en vertical queda brutal. Incluye cable riser, de calidad. Han mejorado este aspecto respecto modelos anteriores, ahora el cable es marca thermaltek y viene bien apantallado para evitar interferencias (lo venden separado por 35€) y tiene muy buenas opiniones. El cristal templado tiene un toque ahumado que le da belleza al conjunto, es de 5mm de grosor y pesa bastante. Se nota que no han escatimado en la fabricación de este producto. Un 10!!
Ghaalroth
20.12.2020
10/10
Оценка пользователя
Великолепно
Moi qui a l'habitude de virer les plaques/portes de mon PC malgré un boîtier déjà bien aéré (pas mal de grilles) je souhaitais une tour réellement très ouverte pour ma nouvelle config.
J'ai pensé à une table de benchmark mais en cherchant je suis tombé sur cette tour que je trouve plus raisonnable car il y a un minimum de protection, qu'on peut retirer à souhait. Parfait.
Je n'ai pas reçu mon CPU donc je poirote et n'ai pas pu testé mon nouveau PC, voir à l'utilisation ce que donne cette tour au niveau des températures bien que j'ai aucune inquiétude, mais surtout de la poussière, c'est à double-tranchant mais au moins j'en suis conscient.
Je trouve ce boîtier de très bonne qualité, la tour est lourde mais étonnamment le gros du poids est dans les bras en métal qui tiennent la vitre. Ça m'a d'ailleurs surpris, la vitre fais déjà un certain poids, et les bras en rajoutent encore beaucoup....bon je ne suis pas l'ingénieur qui à construit cette tour alors je dois faire confiance.
La tour semble TRÈS robuste mais le poids est partagé étrangement comme je disais, ça reste subjectif.
Vous verrez sur les photos, toute la partie droite de ma carte mère Z390UD N'EST PAS vissée, tout simplement car on ne peut pas. Le boîtier est pourtant fait pour les ATX et mini ATX. Peut-être que la Z390UD n'est pas parfaite pour ce boîtier, peut-être que ça ira très bien avec une autre carte mère. Je ne sais pas.
C'est dommage.... mais pas si grave car 90% de la carte est correctement visée, il faut juste faire attention quand on installe la RAM car la carte mère plie, il faut la repousser par derrière avec un doigt pour la maintenir le plus à plat possible afin de ne pas l'abîmer.
Vous verrez également sur les photos que pour des ventilos additionnels il faudra bricoler un peu avec des colliers de serrage. Heureusement que j'ai été voir en avance des photos de config avec ce boîtier et je suis tombé sur UNE personne qui avait fait ça sinon je me serai senti bien con avec mes ventilos en trop, je n'aurai peut-être pas pensé à faire ça. Merci à ce brave inconnu.
J'ai pensé à une table de benchmark mais en cherchant je suis tombé sur cette tour que je trouve plus raisonnable car il y a un minimum de protection, qu'on peut retirer à souhait. Parfait.
Je n'ai pas reçu mon CPU donc je poirote et n'ai pas pu testé mon nouveau PC, voir à l'utilisation ce que donne cette tour au niveau des températures bien que j'ai aucune inquiétude, mais surtout de la poussière, c'est à double-tranchant mais au moins j'en suis conscient.
Je trouve ce boîtier de très bonne qualité, la tour est lourde mais étonnamment le gros du poids est dans les bras en métal qui tiennent la vitre. Ça m'a d'ailleurs surpris, la vitre fais déjà un certain poids, et les bras en rajoutent encore beaucoup....bon je ne suis pas l'ingénieur qui à construit cette tour alors je dois faire confiance.
La tour semble TRÈS robuste mais le poids est partagé étrangement comme je disais, ça reste subjectif.
Vous verrez sur les photos, toute la partie droite de ma carte mère Z390UD N'EST PAS vissée, tout simplement car on ne peut pas. Le boîtier est pourtant fait pour les ATX et mini ATX. Peut-être que la Z390UD n'est pas parfaite pour ce boîtier, peut-être que ça ira très bien avec une autre carte mère. Je ne sais pas.
C'est dommage.... mais pas si grave car 90% de la carte est correctement visée, il faut juste faire attention quand on installe la RAM car la carte mère plie, il faut la repousser par derrière avec un doigt pour la maintenir le plus à plat possible afin de ne pas l'abîmer.
Vous verrez également sur les photos que pour des ventilos additionnels il faudra bricoler un peu avec des colliers de serrage. Heureusement que j'ai été voir en avance des photos de config avec ce boîtier et je suis tombé sur UNE personne qui avait fait ça sinon je me serai senti bien con avec mes ventilos en trop, je n'aurai peut-être pas pensé à faire ça. Merci à ce brave inconnu.
Sergio Velasco
20.12.2020
8/10
Оценка пользователя
Хорошо
+Pros:
+ Estilo unico perfecto para refrigeracion liquida tanto AIO o Custom.
+ Todas las piezas encajan perfectas y firmes.
+ Cristal templado que no se raya tan facil como el de metacrilato en las anteriores versiones.
-Contra:
- Manual de instrucciones horrendo, busca algun video de youtube para montarla.
- No se si es por la pintura blanca que lleva, pero el 80% de los tornillos costaba bastante de apretar.
- Limpiarla de polvo cada 2-3 semanas.
+ Estilo unico perfecto para refrigeracion liquida tanto AIO o Custom.
+ Todas las piezas encajan perfectas y firmes.
+ Cristal templado que no se raya tan facil como el de metacrilato en las anteriores versiones.
-Contra:
- Manual de instrucciones horrendo, busca algun video de youtube para montarla.
- No se si es por la pintura blanca que lleva, pero el 80% de los tornillos costaba bastante de apretar.
- Limpiarla de polvo cada 2-3 semanas.
Alejo
20.12.2020
10/10
Оценка пользователя
Великолепно
La caja es pura calidad de construccion y materiales,
presenta refuerzos en cada esquina y varias opciones de presentacion para un pc que va a pretender enseñar sus tripas sin tapujos.
Trae varias plataformas y brackets que se refuerzan entre si para que todo quede bien solido, lo coloques como lo coloques, ya que permite el montaje de la gpu y apu en horizontal o vertical (en el caso de la apu solo frente a configuraciones micro atx) ahora me arrepiento de no haber ahondado mas en una placa de este tipo, porque la apu vertical queda bestial, tambien trae una base para tubo de refrigeracion liquida.
Varios topetes de goma para reducir vibraciones, entre ellos cuatro patitas para ponerla tipo mesa, tambien traen dos bases bastante solidas para colocarla en posicion vertical, y una base al lomo para anclarla a la pared, y entre los topetes, los mas importantes para proteger el cristal templado frente a las barras de metal, que son macizas.
Un cableado de conexion para mb/gpu para quien decida la posicion vertical.
Gran espacio en compartimento interno para esconder el cableado de la apu, y varias salidas a diferentes alturas.
Multitud de perforaciones de todo tipo y por todas partes que te van a venir de lujo si eres una mente inquieta y te da por personalizarla mas.
El precio esta mas que justificado.
presenta refuerzos en cada esquina y varias opciones de presentacion para un pc que va a pretender enseñar sus tripas sin tapujos.
Trae varias plataformas y brackets que se refuerzan entre si para que todo quede bien solido, lo coloques como lo coloques, ya que permite el montaje de la gpu y apu en horizontal o vertical (en el caso de la apu solo frente a configuraciones micro atx) ahora me arrepiento de no haber ahondado mas en una placa de este tipo, porque la apu vertical queda bestial, tambien trae una base para tubo de refrigeracion liquida.
Varios topetes de goma para reducir vibraciones, entre ellos cuatro patitas para ponerla tipo mesa, tambien traen dos bases bastante solidas para colocarla en posicion vertical, y una base al lomo para anclarla a la pared, y entre los topetes, los mas importantes para proteger el cristal templado frente a las barras de metal, que son macizas.
Un cableado de conexion para mb/gpu para quien decida la posicion vertical.
Gran espacio en compartimento interno para esconder el cableado de la apu, y varias salidas a diferentes alturas.
Multitud de perforaciones de todo tipo y por todas partes que te van a venir de lujo si eres una mente inquieta y te da por personalizarla mas.
El precio esta mas que justificado.
Показаны отзывы 105-152 из 269.
Похожие товары с лучшей оценкой
Wizemart © 2026.
Рекомендательная система по умному выбору товаров по отзывам и рейтингам
