Отзывы о Холодильник Hyundai CO1003
491 отзывов пользователей o Hyundai CO1003
Пользовались
Hyundai CO1003?
Поделитесь своим опытом и помогите другим сделать правильный выбор
- + Всё работает

However, I was expecting some minor difficulties in putting it together - judging by the fair amount of people that have complained in the reviews that it was a bit difficult to do do!
It actually isn't difficult to do do at all. Honestly, a cursory look at the instructions and the parts before starting was all it took. It was obvious the only tool I'd need was something to initially split the cotter pins for the wheels. I didn't even have to look at the instructions again to do it. It is literally snap and push together.
As for cutting the grass. It works absolutely fine. It is light enough to manoeuvre and easy enough to empty. I really like the power cord not being permanently attached to the mower so can be removed and kept safe.
What I do not like is the way it is adjusted for cutting height - this is indeed awkward. Anyone buying this must be aware that it will take some force as there is no lever on the outside of the mower to do it.
To raise the cutting height you will first need to turn it upside down. Then you'll need pull the axles up towards to you whilst moving them forward, (for the front axle or backward for the back axle), until you get them into the lowest notches in the casing in each wheelwell.
The same if you want to lower but in this case you let the springs pull the axle further into the body of the mower to the deepest notch.
The mower is supplied with the axles in the centre position. I tend to leave it there.
Other than that. Lovely mower.

On 21 June, I took a chance and ordered the Hyundai HYM3200E that I saw on the Amazon site. It arrived on 23 June and it has cut 2 lawns today. This also is a DIY assembly product, is also flimsy and it is from the PRC. However it is designed much better and it will not fail in the way that my Flymo did.
The instructions could be improved, but it was put together in about an hour. A few tips. Use a work table.
There are 4 large washers, 4 small washers. Small ones are for the orange fixings. large ones for the wheel axles.
1. First attach lower handles to the machine. 2. Next attach the upper handle (with the cable holder attached) to the lower handles. 3. lightly grease the axles and fit the wheels the right way round, otherwise the cover will not fit. The wheels are now held on with a split pin that goes though a small hole in the axle (not a R clip as stated in the manual. With the machine inverted it may be necessary to press the wheel inwards to reveal the hole. Splay the split pin to prevent it falling out.
The 2-pin mains plug suggests that the 1 KW motor has double insulation as there is no Earth connection. Being able to remove the entire cable is also an advantage. In use, the mower cut well on the medium setting and as the weight is under 9 Kg there were no wheel marks left on the lawn. For around £80 and a 3 year warranty, this lightweight machine is ideal for a small lawn.

Simple to assemble by anyone with a modicum of sense.
Instructiuns could be a little clearer, but not bad.
Mower a joy to use, very light weight and easy to control.
Highly delighted with my purchase.

After setting the height (three to choose from) it gave a lovely cut - even the odd, rogue stalky stems of grass that were being missed by our manual lawnmower are gone now. It cut almost up to the edge with only minimal border trimming required - a bonus for me! I didn't find it too noisy either.
The 'grass catcher' is of a generous size and appeared to collect every blade. However, I have deducted one star for this basket being a little flimsier than I'd have liked, and also for a visible plastic scuff mark we noticed upon unpacking the components.
I'd have to agree with other reviewers who found the instruction manual unclear. It's a proper printed booklet, but the imagery is not that crisp and the accompanying instructions are pretty minimal. Mainly by using the booklet as a rough guide and applying plenty of common sense it worked out okay.
I've taken photos of the 'before and after' so you can see all of the components that will require assembly. And in case you're wondering why we have a lawnmower in our kitchen, we tackled the assembly indoors due to bad weather :)
Conclusion: Overall the mower is a delight to use and I am happy to recommend it.



the second time I used it the front left wheel came off, the 'r' pin had clearly come out and was now lost. I'm now having to purchase a suitable r pin. Also, when I received the product I tried three times to speak to someone because I was puzzled by some of the contents of the assembly pack which were not relevant to the assembly, I.e. 9 washers, 5 with a larger hole than the other 4 and loose in the box were two black cylinders 4cm in depth and 3cm in diameter and again, according to the instructions, were not relevant to the assembly of the mower. Failure to get through on the phone in all fairness could possibly be due to reduced staff because of covid.


Although never put one together before was fairly straightforward but diagrams could do to be larger to see where the 'R' pins went but got there in the end. Could have done with a spare or 2 being that they were small & easily lost. Looked on line also.
All in all nice lightweight machine & bag bigger than me last mower so less stopping to empty. Just a bit noisier than expected.
