Отзывы о Материнская плата GIGABYTE Z490 AORUS XTREME WATERFORCE (rev. 1.x)

Топ за свои деньги

годно

The motherboard does not look perfect.
Accessories are not complete,
I can not install with a cpu fan
I will return soon

This is a great motherboard that supports Threadripper 1 and 2 CPU's.
RAM for the TR boards is surprisingly expensive if you want one qualified by the manufacturer.
Qualified RAM is simple plug and play. Cheaper RAM could work but, you may need to tweak the BIOS memory settings.

It is superseded by a newer model supporting TR 2 and 3 CPUs and even better features although may not have support for TR 1 CPU's. If you don't need TR1 support choose the newer model for some future proofing. It may become difficult to find TR1 and TR2 CPU's as newer versions are released by AMD.

"repacked by Amazon" was not mentioned in the description and tools, g connector and part of the WiFi receiver was missing.
Was half the price. I kept it anyway and it works great.

Es una placa madre poderosa y bonita en estética y muy buena

👍👍👍👍👍👍👍

Works perfectly well with TR 2920x

good quality overall

最近のAORUSマザボのデザインで最も良いと思います。
CPUのOCはしていませんが、メモリのOCはしています。
CPUは2990WXを使用し、メモリはF4-3200C14Q-32GFXを使用しています。
メモリを3200MHzまでOCして１週間連続稼働させましたが安定して動作しました。
かなり気に入っています。

特段色々は試してないですが不具合なく動作しているので満足です

This is the second X399 Aorus Extreme board I have owned. These motherboards are solid in construction and feel like the high-end motherboard it is supposed to be. Over all I have had good luck with these boards. The BIOS is not as fancy as MSI or Asus, but it’s stable and it works fine.

The setup is very simple, and the manual is good for first time TR4 users.

I use a 1950x in one and a 2950x in the other Aorus Extreme board. What I have discovered is these boards can be picky with memory running 4 x 16 GB sticks. In one I have Corsiar Vengeance RGB Pro 4 x 16GB hits at CL16. The 2950x system will not run this memory at 3200. I had to manually set it at 3000 and it’s perfectly stable. The 1950x is running with G.Skill Flare X Series 4 x 8GB at 3200 using the default XMP profile 1 with zero issues. I’m not sure but I think it must be the density causing the 2950x and the 1950x to not run 4 x 16GB sticks at 3200. I figure a BIOS update should correct this minor issue. For this I had to knock 1 star off of the rating.

I am vert pleased with this motherboard, quality, features, and the layout.

Works fine, until the DEDICATED GPU is mounted. Don't buy if you want to use NVIDIA or AMD graphic card. Wait for BIOS update, or other FIX. Don't BUY IT.

This board could easily have been 5 star however I could have easily given it 3!

Bottom line is the BIOS needs updating. I had an issue with the most recent BIOS (wouldn't update) and tried F4 update which worked & also fixed my issue. So if you get a failure on the most recent BIOS try the next version. Also seen many people saying they've had blank screens etc after installing the BIOS. Mine was blank for nearly 10 mins before it completed. Don't turn the PC off! Let it run it's course.

My comment re 3 stars is more aimed at Gigabyte's tech help. I asked them several questions (including this one) and they weren't exactly great. I totally understand why others might have given up on this board as the support just wasn't there/clear. Hopefully this will help some of you who might encounter this issue.

Finish by saying other than these issues, the board is performing well.

For its cost a nice solid mother board , fitted a pentium gold @ 4ghz and it ran as well as a dual core 4 threads CPU can , this was a stop cap as waiting for the 10th gen Intel Core i9 10900K which the board just accepted fine , I have 128gb ram and a 2060 super graphics card installed , be quiet dark rock pro 4 CPU cooler and a be quiet straight power 11 800 watt psu , the machine has been stable from day one , board has had 4 bios updates in that time with one MCU update

Works fine so far. Only issue was the drivers, since its quite new as of writing this the LAN driver is not on the Gigabyte page (or atleast I didn't find it) instead I used the driver for the Z490 motherboard and it worked. A bit pricey.

It's hard to show Gigabyte too much more trust after this monumental hiccup and I say this as a loyal customer of theirs for nearly twenty years. From randomly disconnecting mice and keyboards to refusing to recognise any of the dedicated graphics cards in my possession (Even those made by their good selves such as a now very common 1050 Ti!) it was not the most reliable experience I've had with a piece of hardware. After flashing the BIOS to version F3 failed to resolve these issues, I tried again with version F5a, only for the board to well and truly check out. This left me little option, given the circumstances, to reluctantly request a return. It's certainly very tempting to change ship to a different manufacturer at this point but I sense Gigabyte just took their eye off the ball with this new 400 series chipset and will be back to their formidable best very soon. However, at the present time, it may be best to consider what better alternatives may be out there.

I have always used Asus motherboards and never had a problem. This was my first venture into the dark side with Gigabyte's flagship mb.

Trust me - saving £60 against other boards was definitely not worth the hassle.

I bench tested the new assembly (thankfully) and immediately ran into a continuous re-boot loop. Because the boards and the 10th Gen CPU's are so new I decided to flash the bios to the latest spec - but still no joy. The assembly included an i7-10700k cpu - and never having any problems with Intel before I decided to return the motherboard and replace it with the Asus Z490 Hero Maximus II (Wi-FI) board.

Unsurprisingly - started first time and the Bios is a dream to work with. Both of these motherboards are too expensive but the old saying still applies - "You get what you pay for". The build quality of this board is poor for the money. Part of this build is a Gigabyte RTX 2070 super and again - I'm not happy with the build quality and the fan noise is ridiculous for the costs involved.

Sorry Gigabyte but I won't be coming back.

A really good MOBO for the price, it's fast slick design is eye catching and it runs my 10900k OC to 5mhz like a dream.

Always used Asus before, but two months in on the gigabyte z490 master for the audio quality and price its a 5 star from me. Sound is just amazing for clarity. Running 19700k 16gb rtx 2080 super.

As others, bios update is/was broken, if your having speed issues on the network (im on bt infinity 2) then go to device manager, expand network adaptors, click the controller i225-V, select properties, select speed and duplex, change the default from auto to 100mbps full dupex will resolve.

Great board updates straight away when installed good features for an it board.