Отзывы о Пила ELITECH ПСА 18Л
218 отзывов пользователей o ELITECH ПСА 18Л
Пользовались
ELITECH ПСА 18Л?
Поделитесь своим опытом и помогите другим сделать правильный выбор
Plugs into your computer using the USB port. First you need to install the software. The mini disc that came with mine could not be read by my computer. Not sure if that is a computer or disk issue. Regardless after about 5 minutes of searching; I found the software online on the Elitech website and downloaded it from there. [...]. I was thinking to myself, why doesn't the manufacturer just pre-install the software onto the device like a flash drive... so all you need to do is plug it in... not sure (I guess there must be more to it).
Once the software is loaded, just plug in, open the software, hit the connect button, then go to parameters.... you program the device from your computer. Then unplug it, press and hold the play button for 4 secs... and your data logging. Very easy in my opinion.
To access the data, is just as easy... just plug in, open the software, hit the connect button, then hit the upload data button. Immediately on your screen you have the data. I then download the data to excel... it exports as a .xls... (not a .xlsx) so should be compatible with almost all versions of excel. I'm using 2003... and it work just fine. (Note: in my case, it exports the data as text, so if you’re trying to build your own charts, you need to convert the data to numeric values.) To reset the device; I found the easiest way to clear the data is just go back to the parameters tab, and save your parameters again... it will clear all the data from the device.
An observation... I found that handling them effects the temp (even for a very short period of time), heats them up. Plugging them into the computer really effects the temp. While this makes it sound like the device is very sensitive, I also found it takes awhile for it to come to back down to room temp. Yea I don't get it either, (sensitive yet slow). In the computer it would heat up to about 79... then it would take almost 30 minutes to get back to 70 degrees. (I have the data to prove it; it's a data logger; lol)
I would purchase again... Haven't had them long enough to test the battery life.
UPDATE: Don't trust the battery charge indicator on the LCD screen. Remove the battery and test the voltage between deployments or every couple months. I checked the voltage on my "bad" unit and found the voltage at 2.5 V (from the 3.0V measured from a new battery). From what I've read about these batteries, they are nearly depleted at 2.6V and so I'll be replacing any battery below 2.7 volts or in use more than 6 months.
10 days later....
Company contacted me after posting this review and offered to send me a model RC-5+ (vice RC-5). This model does not require a device driver and works flawlessly so far. Just download the app and plug it in. I suggest if you have a Mac that you purchase the RC 5+ model. I really appreciated the spirit of the company in reacting to the review.
20 days later...
Success. Worked with the company through several versions of the driver. They are in China and I in the U.S., yet we communicated and got the job done. Highly recommend the company! I would still suggest the RC 5+ model as it does not use a driver.
The second worked half way, ie, it didn't work. It displayed correct temperatures, recorded under factory default settings, and downloaded to the software. Unfortunately, it completely ignored commands from the software (eg, setting the clock to something other than 00:00 on 1/1/2012).
I returned the defective one and ordered two more (7/18). Both defective in the same way. Returned them. Ordered two more (7/26). Both defective. Returned them. Perhaps I randomly received 5 units from one bad batch. After months to let inventory clear, I ordered two more (11/18). Both defective. Returning them.
The first one still works perfectly. I still need two. Four-letter word.
Amazon should remove this product from catalog.
The battery cover on mine was in pretty tight, but worked easily once removed--I recommend using a nickel or a quarter, NOT a screwdriver. Remember 'lefty loosey--righty tighty' or counter-clockwise to open. A firm but gentle pressure gets it moving. Be sure the little tabs are in the right place when you try to close it up. Didn't have any problems once it was open the first time. Others have had problems with seals/waterproofness, but all the seals on mine are perfect, and I don't plan on taking it swimming. I use a small piece of tape to secure the USB cover--the friction fit will hold it, but not securely.
So, not perfect, but for the price, pretty close.
The desktop software is pretty basic. It can a be a bit buggy and it is sometimes takes several tries to erase the data on the logger.
Pros:
Consistent Temp readings. You can enter a correction factor against a calibrated source.
Cons:
Short battery life, especially in freezers. Desktop software can be buggy .
Got working under Linux with Python package: "pip install elitech-datareader". Put yourself in the dialout group so you don't have to sudo all the time.
Now that I have it all working, the landlord seems to have turned up the heat.
We only have Mac OS computers in our house, and when we recently upgraded to OS 10.12 (Sierra) we began having kernel panics (crashes) every time we plugged in the USB logger. So I began corresponding with Elitech sales (sales@elithechus.com) and they were able to work with their tech group in China to produce a Mac OS driver that works with OS Sierra.
This logger now works perfectly with the latest Mac OS.
Great product--if you have any concerns about your fridge or freezer temps (possible public health hazard) buy this and use it--you can document temps every 15 minutes over several days (we have done this for a week).
Highly recommended and very customer friendly!
For me, my best use was with my refrigerators and freezers. Make sure you keep them as cold as recommended without overdoing it and donating your hard earned money to the utilities company.
The proprietary software is far more complicated than necessary. After leaving this at a remote home that I was wanting to monitor, i was unable to get any readings from the device. I am not sure if it was because of the 2 minute discrepancy with the time on my laptop, the monitoring was not started correctly, or the device was not working properly.
When I tried to get a reading, I was told that there was a discrepancy with the time. After I reset it, the memory was either cleared or never recorded.







