Отзывы о Материнская плата ASUS PRIME Z790-P
326 отзывов пользователей o ASUS PRIME Z790-P
Пользовались
ASUS PRIME Z790-P?
Поделитесь своим опытом и помогите другим сделать правильный выбор
Скромный эксперт
13.10.2020
6/10
Оценка пользователя
Плохо
I'm a real fan of Asus boards and really looked carefully before deciding on this one. This is a pretty good board. It does seem to have some quirks though as settings which I've configured successfully in the BIOS of other Asus boards, don't seem to get the same level of stability or predictability with this one. I can't say why.
I updated to the latest BIOS 1401 (if I'm not mistaken) upon opening (something I always do) but I suspect a revised version may be needed given some of the idiosyncrasies the board seems to possess.
One of the strange things it does is double boot when the power is removed from the PSU. Normally motherboards, (including this one) will only double, or triple boot (turn on quickly, go off for half a second then boot again) when changes to the bios or hardware are made, but a complete removal of power seems to prompt such behaviour from this one which doesn't particularly inspire confidence. I note here, that such behaviour doesn't actually present any issues, as the board does perform properly after booting even when this happens, and so far at least, no unsavoury operation has resulted, but as I said, it isn't exactly comforting.
There are other quirks too, setting CSM so that my RAID card works and Windows 10 can be installed without the error "the nvme drive can't be used to install windows" (I'm paraphrasing) results in a blank screen when the RAID card is booting so no status of the RAID boot process is visible. Again, this doesn't stop the PC from working correctly, but this means I if I need to get into the RAID configuration, I either have to do this via the raid management console in Windows, or change the boot settings in the bios so the RAID boot becomes visible at startup (but this will of course render the use of the controller in windows disabled or problematic, which in itself is slightly puzzling).
There are actually a few other anomalous issues like this, which as I've said, I've not had with previous boards. I won't mention them all here as the review is already quite lengthy, but they do render the board slightly problematic, and it does mean you will likely end up with a measure of troubleshooting on your hands before you can get it working properly, particularly if you have a complex build on your hands. I didn't have these issues initially when i set it up on my test bed; it worked flawlessly for 2 days with just the RAM, nvme drives, memory, a basic graphics card, and of course Windows 10 installed. None of these issues surfaced, so I suspect this is due to my 'actual' build having a more complicated setup with additional components added to bring it into actual spec. Anyway once you get past these issues, for the most part it works well. As I said, these issues probably need a Bios update to sort them out and I await the next release patiently in the hope they will be resolved.
Once the OS is installed the board is stable and works well, there its great for overclocking and so far hasn't skipped a beat. One drawback I found is the lack of fan headers. For a board of this spec (and cost), it needs at least 2 more standard 3/4 pin headers to be acceptable. Doubling up fans with 'splitters' as I had to do is a 'Fred Flintstone' option that should not have to be employed with a board of this stature.
I will update this post after a couple of months of using this board, or if any untoward issues develop so you have a better idea of how its performed since installation. At present I've had it just over a week, which probably isn't a sufficient period of time to make a comprehensive assessment of its operation... but I quite like it so far, so we shall see how things develop over the passage of time.
PDTech
I updated to the latest BIOS 1401 (if I'm not mistaken) upon opening (something I always do) but I suspect a revised version may be needed given some of the idiosyncrasies the board seems to possess.
One of the strange things it does is double boot when the power is removed from the PSU. Normally motherboards, (including this one) will only double, or triple boot (turn on quickly, go off for half a second then boot again) when changes to the bios or hardware are made, but a complete removal of power seems to prompt such behaviour from this one which doesn't particularly inspire confidence. I note here, that such behaviour doesn't actually present any issues, as the board does perform properly after booting even when this happens, and so far at least, no unsavoury operation has resulted, but as I said, it isn't exactly comforting.
There are other quirks too, setting CSM so that my RAID card works and Windows 10 can be installed without the error "the nvme drive can't be used to install windows" (I'm paraphrasing) results in a blank screen when the RAID card is booting so no status of the RAID boot process is visible. Again, this doesn't stop the PC from working correctly, but this means I if I need to get into the RAID configuration, I either have to do this via the raid management console in Windows, or change the boot settings in the bios so the RAID boot becomes visible at startup (but this will of course render the use of the controller in windows disabled or problematic, which in itself is slightly puzzling).
There are actually a few other anomalous issues like this, which as I've said, I've not had with previous boards. I won't mention them all here as the review is already quite lengthy, but they do render the board slightly problematic, and it does mean you will likely end up with a measure of troubleshooting on your hands before you can get it working properly, particularly if you have a complex build on your hands. I didn't have these issues initially when i set it up on my test bed; it worked flawlessly for 2 days with just the RAM, nvme drives, memory, a basic graphics card, and of course Windows 10 installed. None of these issues surfaced, so I suspect this is due to my 'actual' build having a more complicated setup with additional components added to bring it into actual spec. Anyway once you get past these issues, for the most part it works well. As I said, these issues probably need a Bios update to sort them out and I await the next release patiently in the hope they will be resolved.
Once the OS is installed the board is stable and works well, there its great for overclocking and so far hasn't skipped a beat. One drawback I found is the lack of fan headers. For a board of this spec (and cost), it needs at least 2 more standard 3/4 pin headers to be acceptable. Doubling up fans with 'splitters' as I had to do is a 'Fred Flintstone' option that should not have to be employed with a board of this stature.
I will update this post after a couple of months of using this board, or if any untoward issues develop so you have a better idea of how its performed since installation. At present I've had it just over a week, which probably isn't a sufficient period of time to make a comprehensive assessment of its operation... but I quite like it so far, so we shall see how things develop over the passage of time.
PDTech
Скромный эксперт
13.10.2020
8/10
Оценка пользователя
Хорошо
I have used MSI motherbaords for the last few years for my PC builds but MSI are annoying in that they do not like you using TVs as monitors and therefore trying to access the BIOS when your resolution is all screwed up when you don't have a VGA port is impossible! So I went for Asus. This board in particular because of the ports it offered, the reviews I found were good and I needed a Hackintosh compatible one.
The first one I got, I had to send back. After installing it in the chassis and logging in to BIOS to change relevant settings (I do not do Overclocking so we are talking standard changes!), I rebooted and got a blank screen. No beeping alerts to suggest that there was anything wrong with the RAM or CPU but I was getting no life from it at all. It had to be returned and to be honest I half considered asking for a full refund to go for my second option of another MSI board (which despite their BIOS resolution issues have always been very good), but I got a replacement.
Replacement, is fine, running sweetly apart from I am now only 2 months in and already the HDMi port seems wobbly and sometimes disconnects itself blacking out the screen again so you have to be really careful when using the rear USB ports etc that you do not knock the HDMi cable. I am hoping that this will be the only issue and with care all will be good.
I am however really impressed with the BIOS settings available. They seem far more expansive than my previous MSI Gaming 3 Z97 board. This means that you can tweak just about anything. I like this freedom of choice and versatility.
So far so good and I like that there are 4 RAM slots as some Mini ATX boards only have 2.
Apart from the HDMi issue the actual running of the board has been faultless so far.
The first one I got, I had to send back. After installing it in the chassis and logging in to BIOS to change relevant settings (I do not do Overclocking so we are talking standard changes!), I rebooted and got a blank screen. No beeping alerts to suggest that there was anything wrong with the RAM or CPU but I was getting no life from it at all. It had to be returned and to be honest I half considered asking for a full refund to go for my second option of another MSI board (which despite their BIOS resolution issues have always been very good), but I got a replacement.
Replacement, is fine, running sweetly apart from I am now only 2 months in and already the HDMi port seems wobbly and sometimes disconnects itself blacking out the screen again so you have to be really careful when using the rear USB ports etc that you do not knock the HDMi cable. I am hoping that this will be the only issue and with care all will be good.
I am however really impressed with the BIOS settings available. They seem far more expansive than my previous MSI Gaming 3 Z97 board. This means that you can tweak just about anything. I like this freedom of choice and versatility.
So far so good and I like that there are 4 RAM slots as some Mini ATX boards only have 2.
Apart from the HDMi issue the actual running of the board has been faultless so far.
Скромный эксперт
13.10.2020
8/10
Оценка пользователя
Хорошо
I bought this motherboard as I was upgrading from an I7 4790k to an I7 9700k and given that I needed a motherboard that supported the 1151 chipset and DDR4 ram.
I have only had good experiences with Asus and ROG in the past and this motherboard is no different. The box arrives with the motherboard, included wifi receiver and all the assorted cables. Installing the motherboard into my case (NZXT H440) was simple and easy to do. However the SATA ports are located underneath where my graphics card sits, this means everytime I want to remove or add a drive into the system I need to remove my graphics card as well
Plugging all the components and wires into the case was simple enough however a couple times I had to consult, the very well written, manual to find what each port was. This was worst when dealing with plugging in my cases power button and reset button onto the motherboard.
The bios is well laid out and easy to navigate and even has an "ez mod" if you don't want to mess around with the more complex features. After I had installed windows the Armory software installed allowing me to customise the RGB aspect of it. This is my only real issue with the motherboard as if you want a Rainbow spectrum effect it looks fantastic however the options for single colours are quite limited and the speed controls on the effects seem to only really have slow-medium-fast and nothing in between.
Bar my personal issue with the RGB I really like this motherboard and will likely use it for many years to come.
4/5
I have only had good experiences with Asus and ROG in the past and this motherboard is no different. The box arrives with the motherboard, included wifi receiver and all the assorted cables. Installing the motherboard into my case (NZXT H440) was simple and easy to do. However the SATA ports are located underneath where my graphics card sits, this means everytime I want to remove or add a drive into the system I need to remove my graphics card as well
Plugging all the components and wires into the case was simple enough however a couple times I had to consult, the very well written, manual to find what each port was. This was worst when dealing with plugging in my cases power button and reset button onto the motherboard.
The bios is well laid out and easy to navigate and even has an "ez mod" if you don't want to mess around with the more complex features. After I had installed windows the Armory software installed allowing me to customise the RGB aspect of it. This is my only real issue with the motherboard as if you want a Rainbow spectrum effect it looks fantastic however the options for single colours are quite limited and the speed controls on the effects seem to only really have slow-medium-fast and nothing in between.
Bar my personal issue with the RGB I really like this motherboard and will likely use it for many years to come.
4/5
Скромный эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
In my experience, motherboards are always fiddly to install.
I've got large hands and arthritis which compound the difficulties.
Ive recently totally rebuilt my gaming pc with the upcoming 3080ti in mind.
My previous build was an Asus gaming pro. I like Asus so wanted to stick with them
Overclocking is very easy via the bios.
Layout wise, it's identical to my previous board.
Some of the fittings are very tight and anyone with large hands will struggle.
But that's motherboards for you.
I can recommend this board for overclockers
I've got large hands and arthritis which compound the difficulties.
Ive recently totally rebuilt my gaming pc with the upcoming 3080ti in mind.
My previous build was an Asus gaming pro. I like Asus so wanted to stick with them
Overclocking is very easy via the bios.
Layout wise, it's identical to my previous board.
Some of the fittings are very tight and anyone with large hands will struggle.
But that's motherboards for you.
I can recommend this board for overclockers
Скромный эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
Can't really see it in the picture.... But amazing motherboard.... Looks cool and performs well... And the Asus bios is the easiest to use so perfect for beginners who aren't used to messing around in the bios... Plus with the asus ai suite software can overclock the system with the touch of a button makes life a lot easier... I'm running Intel i7 9700k at 5.1ghz using the overclocking software from Asus
Скромный эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
I can't fault Asus on the quality of design, extensive features and ease of installation of their motherboards - the Maximus XI Hero was the perfect choice for someone that wanted high end specs, without breaking the bank, or my PC when trying to put it together.
The I/O options are extensive and cater for all my current and future peripheral needs.
The instruction manual was easy to follow and I had no problem installing all the components onto the motherboard and then motherboard into my case.
The BIOS is easy to navigate along with the installation and use of supporting utilities and drivers to get the best out of the board.
All in all this is a really solid product and definitely worth picking up if you're serious about gaming.
The I/O options are extensive and cater for all my current and future peripheral needs.
The instruction manual was easy to follow and I had no problem installing all the components onto the motherboard and then motherboard into my case.
The BIOS is easy to navigate along with the installation and use of supporting utilities and drivers to get the best out of the board.
All in all this is a really solid product and definitely worth picking up if you're serious about gaming.
Скромный эксперт
13.10.2020
6/10
Оценка пользователя
Плохо
If im all time use ASUS brand, than now im moved. Compare this motherboard to old asus H310, this one can install Linux and make home nas server. Problems with NVMe drive and other thinks whats drive me crazy. I exchange next day for Gigabyte z390 m gaming, extra £5 but at least important thinks for what i buy works.
Скромный эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
Beautiful motherboad and comes well equipped for a variety of components. User guide for builders is detailed and helpful as well as an on board 2 digit desplay that will help pinpoint any issues. Only issue for me is the motherboard only comes with 2 usb sets of pins (cooling system needs one and my case requires 2) although this was fixed by combining pins.
Скромный эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
Worked fine in my system. Overclocked easily to 35% overclock.
Did not try to go any further as performance was adequate for FSX.
Did not try to go any further as performance was adequate for FSX.
Скромный эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
I teamed this up with a 9900 CPU, 16GB DDR4/3000, a Corsair hydro H100 CPU Cooler, a Corsair 750W PSU, a Corsair Carbide case, A GEForce GTX 1060/6Gb , 2 x SSD and 2 x HDD. It drives a Samsung U28590 Monitor @ 4k resolution on Windows 10/64.
This MOBO, once installed, switched on and worked perfectly and has worked perfectly ever since. This is what you want from a product.
This MOBO, once installed, switched on and worked perfectly and has worked perfectly ever since. This is what you want from a product.
Скромный эксперт
13.10.2020
6/10
Оценка пользователя
Плохо
The item arrived with a few scratches and scuffs despite being described as brand new. Also my 20% off cablemods voucher had already been claimed. Poor show
Скромный эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
This motherboard looks great beside other aura sync hardware and works even better. The inclusion of dedicated clear cmos and bios buttons and bios switch on the board make it great for overclocking with reduced risk
Скромный эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
This motherboard is expensive but the arrays of features that are present have really left me with the constant urge to make my PC better. 9900K in this and you can pretty much do anything you want.
Скромный эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
What can i say, it's beautiful, it's powerful, it's amazing. Runs perfectly with a i9-9900k 5GhZ, 64gb of HyperX memory, with an RTX-2080 TI
Скромный эксперт
13.10.2020
8/10
Оценка пользователя
Хорошо
Excellent board, excellent brand. Wish the base version would come with WiFi though.
Скромный эксперт
13.10.2020
6/10
Оценка пользователя
Плохо
As a consequence of the reduced size of the board, if you install a 'thick' graphics card, it levels little room for any other PCI peripherals.
Скромный эксперт
13.10.2020
2/10
Оценка пользователя
Ужасно
Hi, overall my pc works just fine with this motherboard, I can say I am pretty happy about it, but I just realized my antenna was missing from the box, now it makes me think was the box opened before I purchased it, or I am just unlucky and the factory forgot to place the antenna inside the box...I guess will never know! Cheers!
Скромный эксперт
13.10.2020
2/10
Оценка пользователя
Ужасно
Thanks to the terrible description and linking of several products on a single page, I manage to buy the ONLY motherboard that does not include WiFi (and therefore no Bluetooth either since it shares the same techno).
Use to have better feeling about Amazon :/
Use to have better feeling about Amazon :/
Скромный эксперт
13.10.2020
2/10
Оценка пользователя
Ужасно
Item appears to have been used, missing cables, used screw marks. Amazon at there best !!!!!!
Скромный эксперт
13.10.2020
8/10
Оценка пользователя
Хорошо
Très bonne carte mère pour le moment. J'ai mis un Core i5 9ème génération et c'est super rapide. 3 secondes pour arriver sur mon compte Windows et 1s pour l'éteindre. Même la carte graphique intégré est super et très rapide pour de la bureautique. Elle est très jolie quand on l'allume. J'ai mis un refroidissement liquide d'Asus. 25°C max à 3700Mz
Je retire une étoile pour le serrage des vis des caches SSD M2. Pourquoi serrer comme un bourrin et mettre des vis cruciformes de si mauvaise qualité? J'ai dû faire un trou avec une perceuse au centre de la vis pour l'enlever après l'avoir abimée. A ce prix là, mettez des vis 5 pans comme en modélisme...
Je retire une étoile pour le serrage des vis des caches SSD M2. Pourquoi serrer comme un bourrin et mettre des vis cruciformes de si mauvaise qualité? J'ai dû faire un trou avec une perceuse au centre de la vis pour l'enlever après l'avoir abimée. A ce prix là, mettez des vis 5 pans comme en modélisme...
Скромный эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
Great for a gaming pc build
Скромный эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
No problems with this, i included it in my latest pc build. straight forward with no issues.
Скромный эксперт
13.10.2020
6/10
Оценка пользователя
Плохо
Tuve que comprar 3 veces la placa de base (Hice la devolución por Amazon, sustituyendo la placa por otra).
Con la primera placa, no se podia arrancar el ordenador mediante el botón de arranque del PC. Sólo se podía arrancar desde el botón de inicio que está situado en la placa de base.
Con la segunda placa, se podia arrancar el PC, pero no daba señal de video al monitor, usando HDMI.
No salio señal de video por HDMI (no uso Display port por lo cual no he podido comprobarlo).
Para testear, cambie la tarjeta gráfica por otra, pero tampoco iba. Simplemente no daba señal de video al monitor.
Cambiando la tarjeta a otro “slot”, no resolvió el problema tampoco.
Al final, solicité la devolución de dinero (porque Amazon sólo te permite sustuir un producto, una sola vez) y compré la tercera placa. Esta sí va bien, y estoy contento con esta placa, pero no entiendo que ASUS NO hace ningún control de calidad. Las placas vienen en cajas precintadas, pero sólo uno de tres placas me ha funcionado.
Con la primera placa, no se podia arrancar el ordenador mediante el botón de arranque del PC. Sólo se podía arrancar desde el botón de inicio que está situado en la placa de base.
Con la segunda placa, se podia arrancar el PC, pero no daba señal de video al monitor, usando HDMI.
No salio señal de video por HDMI (no uso Display port por lo cual no he podido comprobarlo).
Para testear, cambie la tarjeta gráfica por otra, pero tampoco iba. Simplemente no daba señal de video al monitor.
Cambiando la tarjeta a otro “slot”, no resolvió el problema tampoco.
Al final, solicité la devolución de dinero (porque Amazon sólo te permite sustuir un producto, una sola vez) y compré la tercera placa. Esta sí va bien, y estoy contento con esta placa, pero no entiendo que ASUS NO hace ningún control de calidad. Las placas vienen en cajas precintadas, pero sólo uno de tres placas me ha funcionado.
Скромный эксперт
13.10.2020
8/10
Оценка пользователя
Хорошо
No problems
Показаны отзывы 241-264 из 326.
