Отзывы о Трубка Thermaltake V-Tubler PETG Tube
158 отзывов пользователей o Thermaltake V-Tubler PETG Tube
Пользовались
Thermaltake V-Tubler PETG Tube?
Поделитесь своим опытом и помогите другим сделать правильный выбор
Janice Tuinstra
02.02.2023
4/10
Оценка пользователя
Ужасно
I specifically looked for the tubes that were 1/2” inside diameter, the description says it is.. it is not, it is 12mm which is like .47 of an inch and this is rigid so it does not stretch. It will not fit in my fountain pump without some kind of adapter.
Amazon Customer
02.02.2023
6/10
Оценка пользователя
Плохо
Not the best. The aluminum mandrels have some machining marks and texture that transfer in the tubing as well the lips could use some redesign as they pinch into the tubing as you bend at time. Silicone mandrel has a knurled kind of texture to it that imprints the inside of the tube when bending and make the bend look hazy
Capt. America
02.02.2023
10/10
Оценка пользователя
Великолепно
First loop using PETG. Used the heat gun on medium heat medium fan, took my time and this tubing bent like butter. Very easy to use. YouTube for video instruction is how I learned.
Robert
02.02.2023
8/10
Оценка пользователя
Хорошо
great set except the size of the Silicone Cord is short .
Capt. America
02.02.2023
10/10
Оценка пользователя
Великолепно
Built my first loop with these and they worked perfectly.
Justian Meyer
02.02.2023
10/10
Оценка пользователя
Великолепно
Works as intended. Highly recommend mounting the guides if you can, which I didn't do.
The pipe cutter does not work well when trying to make small adjustments (somewhere around <= 10mm) to PETG, since the blade heats up the plastic enough to melt the very edges. However, this is more a limitation of the material than the product. Focus on getting the cut as accurate as possible the first pass, otherwise you may have better luck by keeping the PETG cool.
The pipe cutter does not work well when trying to make small adjustments (somewhere around <= 10mm) to PETG, since the blade heats up the plastic enough to melt the very edges. However, this is more a limitation of the material than the product. Focus on getting the cut as accurate as possible the first pass, otherwise you may have better luck by keeping the PETG cool.
mjplatt
02.02.2023
10/10
Оценка пользователя
Великолепно
I suggest using this rotary cutter for your clear hard tubing (PETG) because it leaves no burrs on the outside of the tubing to possibly damage the o-rings and cause leaks. You will still have to use the reamer for the inside of the tubing.
I used some clear soft tubing for the rear of the case where it was out of view. Scissors work just fine for that.
I used some clear soft tubing for the rear of the case where it was out of view. Scissors work just fine for that.
PC
02.02.2023
8/10
Оценка пользователя
Хорошо
The item condition was "new" when I ordered it (paid for it), but I've received an open box and the silicon insert is missing.
The build quality is good and these are useful tools that I'll use soon for a flexible-to-hard tubing project.
The build quality is good and these are useful tools that I'll use soon for a flexible-to-hard tubing project.
Yohann Goodspeed
02.02.2023
10/10
Оценка пользователя
Великолепно
I really couldn’t have bent my hard tubing correctly without this tool. I got great results the firs time bending hard tube. I recommend this product if you are an enthusiast and want to start hard tube water cooling.
Ron Zimmer
02.02.2023
10/10
Оценка пользователя
Великолепно
First order of this the silicone tube was missing... so bending tubes was not going to happen without crimping my corners. They mailed a replacement, thank you amazon for not being awful, but still have to mail the old one back, gahhh. All in all, very sturdy tools, worth the money if you want to bend your own tubes.
Justin Hill
02.02.2023
10/10
Оценка пользователя
Великолепно
Great kit if you're planning on building a hardline PC.
MM
02.02.2023
10/10
Оценка пользователя
Великолепно
Worked perfectly. Mix up some soapy water and dip the silicone in it before you make each bend.
Victor S.
02.02.2023
8/10
Оценка пользователя
Хорошо
Made from great quality. The cutter was loose and was making my cuts to go on a spiral but was an easy fix with tighting the screw that’s why the one star mark down other than that exceptional.
Dylan Gullason
02.02.2023
8/10
Оценка пользователя
Хорошо
These tools are honestly vey well built. The metal guides are precise and smooth and the tubing insert is very nice quality. My only real complaint is the price. Over $100 for some tools you will probably only use once is a bit pricey to me. But you can always sell it afterward to make a bit of it back.
AuroraKing
02.02.2023
8/10
Оценка пользователя
Хорошо
Would have given this a 5 star if
1. The insert is easy to pull out after bending
2. Price is too high consider I only use it once.
Anyway, without it, I can't get my tube bend for sure.
1. The insert is easy to pull out after bending
2. Price is too high consider I only use it once.
Anyway, without it, I can't get my tube bend for sure.
Rob Mayhew
02.02.2023
10/10
Оценка пользователя
Великолепно
this kit cost a good bit more than the others i looked at but wow when i compared it ot another chepar one i bought i never even used the other. The cutting tool is really solid as is the bending tool. and inule the cheaper kits silicon insert actualy fits the tubing correctly. use this kit its damn good.
HighVAC
02.02.2023
8/10
Оценка пользователя
Хорошо
The quality of this is amazing, all parts except the chamfer tool(plastic) and tubing cutter (cast meta) are machined aluminum and are very well made. Only reason it gets 4 stars is that the 90° bender is a bit large for bends that are close together.
Garrett
02.02.2023
8/10
Оценка пользователя
Хорошо
Just in case you were wondering if this is the right size for a Nerf gun barrel... It's not. It's too small. It seems like nice tubing though.
Jesse Barlow
02.02.2023
10/10
Оценка пользователя
Великолепно
First time bending tubes, was pretty easy
Amazon Customer
02.02.2023
10/10
Оценка пользователя
Великолепно
nice
Philip C.
02.02.2023
10/10
Оценка пользователя
Великолепно
With a little practice you can get it done. Have fun last time took me 15 minutes to bend two tubes and install them. The first time I did it, took over one hour to bend my first, and it was unuseable. I want to do more so if you are having trouble just bring your rig and some tubing and stop by my place. I will hook it up! You'll love it.
Amazon Customer
02.02.2023
10/10
Оценка пользователя
Великолепно
Very happy
Jim Moore
02.02.2023
10/10
Оценка пользователя
Великолепно
I purchased these tubes to make a water feature they are working great
matthew lawlyes
02.02.2023
8/10
Оценка пользователя
Хорошо
Thermaltake’s PETG tubes are quality hard line water cooled pc tubes. While larger diameter tubes are generally more difficult to bend, these tubes heat evenly (with proper patience) and bend smoothly (again, with proper patience), allowing for both gentle and sharp bends. If you are in the market for new tubes, I highly recommend Thermaltake’s PETG.
Показаны отзывы 49-72 из 158.
Похожие товары с лучшей оценкой
Wizemart © 2026.
Рекомендательная система по умному выбору товаров по отзывам и рейтингам
