Отзывы о Фен Scarlett SC-HD70I18
480 отзывов пользователей o Scarlett SC-HD70I18
Пользовались
Scarlett SC-HD70I18?
Поделитесь своим опытом и помогите другим сделать правильный выбор
The Scarlett Solo is Focusrite's entry level model but it hasn't made any compromises in the quality of construction or components used. It only has two inputs, microphone and instrument, but that is all that many people will ever need. Crucially, it uses the same Focusrite ASIO driver as the rest of the range and this is essential to achieve the low latency needed to make online collaboration possible. Having just returned five cheaper units from another well known manufacturer that stated similar spec and functionality to the Solo, I would strongly advise you to check what driver is supplied on the manufacturers support page. If it's the freeware ASIO4ALL do not waste your time. Whatever the advertised spec and branding, if the manufacturer does not provide their own driver the unit will not be optimised to achieve low latency and you will experience delay in your monitoring and recording.
Bought this for my Audio Technica AT2020 XLR.
From the first day I received this, my mic would end up sounding robotic or as if I was in a tube.
This was in discord and OBS for the record. This would happen regularly after a few hours of use.
I tried every fix under the sun, nothing helped.
Just googling 'focusrite scarlett solo mic distortion' will give you hundreds of results all with a similar issue to mine. This seems to be a driver issue/compatibility issue and its been a problem with focusrite products for years by the looks of things.
Eventually I gave up and opted to return it and get the komplete audio 1 which is £20 cheaper and for the past week as of writing this review has had no issues at all.
I would recommend against the scarlett solo. It looks and sounds great when it does work but within a few hours theres a good chance it'll just stop working.
Da ich schon seit Jahren singe und diverse Instrumente spiele, wollte ich mir endlich ein kleines Heimstudio einrichten. Beyerdynamic DT 990, Audio Technica AT2020, 48V-Phantomspeisung-Netzteil, eine Cubase-Lizenz bestellt und ab geht's...dachte ich.
Für die Audiowiedergabe selbst war das Mainboard gut genug (MSI B450 Pro Carbon mit ALC1220 Soundchip), die Aufnahmequalität war jedoch absolute Grütze. Für Sprache über Discord hat es zwar gereicht, beim Aufnehmen von Vocals für Lieder konnte man aber fast keinen Unterschied zwischen meinem vorherigen Aukey GD-G1, einem SM58, einem SM7B und meinem AT2020 feststellen, der Sound war wie von einem Schleier bedeckt, einfach schlecht.
Schließlich habe ich mich doch zusammengerissen und mir das Focusrite Scarlett Solo gekauft, das schon von vorneherein viele praktische Vorteile mit sich bringt:
- Mikrofonverstärker mit Phantomspeisung; vorher war es trotz Phantomspeisung und +30dB Verstärkung in Windows ziemlich leise
- zusätzlicher Klinken-Input für meine Gitarre; vorher musste ich immer zwischen Mikro und Instrument mit Adaptern umstecken
- analoge Regler; durch nichts zu ersetzen!
- Kopfhörerausgang mit ausreichend Power für meine DT 990, ein zusätzlicher Verstärker ist total überflüssig
Ausgepackt, angeschlossen, Treiber installiert (extrem einfach und hat auf Anhieb funktioniert). Es ist wirklich ein kompaktes Gerät mit hoher Verarbeitungsqualität, macht einen hochwertigen Eindruck.
Als ich dann Cubase geöffnet und meine Vocals nochmal eingespielt hab, nahm die Begeisterung kein Ende.
Die Qualität der Aufnahmen ist einfach ein Unterschied wie Tag und Nacht und ich fühlte mich ziemlich dumm, dass ich der Meinung war, dass der Soundchip auf dem Mainboard doch eh schon gut genug ist. Stimmen klingen jetzt sehr natürlich und klar und die Gitarre hat jetzt auch einen Klangkörper bekommen und klingt nicht mehr fad und langweilig.
Auch bei voll aufgedrehten Reglern sind kaum Verzerrungen und Rauschen zu hören, das Interface arbeitet auch bei Volllast sehr sauber.
Das einzige Manko für mich ist, dass das mitgelieferte Kabel mit 1m etwas zu kurz ist, um das Interface da zu positionieren, wo ich es gerne hätte, nämlich auf dem Schreibtisch.
Die Air-Funktion, die mit der 3. Generation des Scarlett eingeführt wurde, boostet die Höhen und Mitten etwas, um einen klareren Klang zu erzielen. Für mich bzw. für mein AT2020 ist diese Funktion aber eher uninteressant und verschlechtert den Klang, da es dann einfach künstlich wirkt.
Vielleicht hilfreich, wenn man ein eher dumpfes Mikrofon hat, wer diese Funktion allerdings nicht benötigt, sollte sich lieber ein paar Taler sparen und sich die 2. Generation des Scarlett kaufen, die technisch ansonsten der 3. Generation ziemlich gleicht.
Fazit:
- gute Optik und Haptik
- gute Audioqualität (sowohl beim Aufnehmen als auch beim Abspielen/Musik hören) mit quasi keiner Latenz
- alle notwendigen Features fürs Heimstudio in einem Gerät
- etwas kurzes Kabel mitgeliefert
- Air-Funktion nicht bei jedem Mikro hilfreich
It's able to have 192,000khz on both output and input so don't worry about it's capabilties. If you are on Windows then you will have to download the drivers before use but thankfully the drivers are really good and easy to use.
Plugging in both my mic and my headphones was simple and I recommend this interface fully, especially if you're new like me to this whole game.
Ho provato anche ad usare la periferica con Ubuntu 19.04 (periferica vista da sola senza alcun intervento da parte mia) registrando con Audacity, quindi anche in ambiente Ubuntu sembra funzionare bene.
Vorrei provarla con Windows 7 sul portatile, vi terrò aggiornati.
I purchased the Focusrite mainly because i was having problems with the
Behringer UMC2o2HD and much of the annoyance of that interface was
a hiss which is constantly there no matter what is plugged In or unplugged other
than headphones or speakers.
I had read a mixed bag reviews on the Focusrite scarlet solo I thought I would get
one and compare the two for noise and then whichever one was the best I'd
keep one or the other.
Well it came out the Focusrite solo was the one I'd be returning mostly through
shear frustration that really the manufacturer has not done enough to make
this an easy install.,
Now I will say with all honesty that I may have had a duff unit so I'm not saying
that all the solo Focusrites will be a problem for everyone.
But having said that my particular unit i would be using this as an interface
for guitar and would be running this through not a Daw at the moment as I have
another interface running through a DAW in another studio and no problems with that set up at all.
So i was using an application JamVox 3 or Guitar Rig 5.
I downloaded the drivers and installed both drivers including the USB driver just in case.
I checked that this interface was combatable with My machine which is running Windows 8 64 bit which it stated it was.
So, after install as specified the USB light was lit up telling there was a sound connection, I checked and yes there was guitar and music, but the guitar sounded as though it wasn't connected to my applications jam vox or Guitar rig, the sound was still clean like its coming from a small amp a dry signal rubbish sound.
No matter what I did, deleted all drivers re downloaded drivers with unit not hooked up, then reconnected and as before all lights, the device is displayed in both my devices but sound as it was before.
This had cost me about three to four hours to get this to work but no luck.
My particular unit no I was not giving it anymore time and contacting the company was not going to help in my case, this unit had already wasted enough of my time an absolute pig’s ear to set up.
Maybe it was faulty, anyway unless the manufacturer was willing to give me another one to trial than this review really isn’t up to much in helping anyone to decide do they want to try their luck as there does seem to be a little confrontation with the Behringer UMC2o2HD but what has to be said about Behringer once you installed their driver their unit functioned as it should but have this hiss, but it is something I can take out of any final recording and at least I know the noise is not actually in the signal so it won't be bound to any guitar effect I use, but something I suppose I’ll live with until it really p me off or am unable to remove it.
Practically the Behringer worked out of the box.
Up to now I've been recording by feeding output from my Xenyx mixer into the line in of my computer sound card and decided to risk buying a dedicated interface. I had seen a lot of the focusrite interfaces in use so, though not the cheapest interface by any means, I thought I'd opt for the Solo as I only really need a mic & gtr input.
After putting it through it's paces over the last couple of days, I am very impressed, the noise floor is so much better than I have been used to and even without and adjustment in my DAW (Reaper), the latency was pretty good. Did a quick loop-back test and set the latency to 'reported' plus 16 samples and it is spot on for everything, operating at 48K samples and a 128K buffer.
The direct monitoring is great, the build quality is rock solid and feels sturdy, the controls are smooth and feel "expensive". I now understand why these interfaces are so popular, you truly do get what you pay for.
I wasn't sure at first about leaving it plugged in, having no on/off switch, but having done a quick search it seems many people leave it on permanently with their system and some have done so for quite literally, years. Though given your on-board soundcard are permanently "on", it's only logical that it would not be an issue. One thing to mention, the USB connector on the cable isn't very clearly 'flat' on one side, if the cable doesn't go in smoothly all the way, you have it the wrong way around. That said, it's USB, so the '3 tries' rule applies anyway! ;-)
As regards setup, I'm not sure why people are having the issues described, it is super straight-forward and I was up and running in no time at all. Plug it in, it's seen as a 'drive', click on the URL mentioned in the quick start guide, follow the on-screen instructions. Once you have run the control software and your system is rebooted, it is seen in it's true form as an audio interface. Setup the required input/output in your DAW and job done.
You can set it up as your default audio for your system as well, I did not initially, but I have done now as I like having the headphone volume control.
Looking forward to more recording with this little beauty, very happy indeed.
The drivers work fine and the build quality is a great premium, I'm not a fan of the red but I can live with it
Great device by Focusrite, Every other budding instrumentalist or a singer, songwriter could go for it without a doubt. If you want only your sound to be recorded then this is the product you are looking for , Zero noise (professional sound quality) , great build , stylish design .
Even you will get a DAW license with it .
If you are a beginner and have no idea of using a DAW (Digital Audio Workstation) then it might take time to get started with it , But they will guide you step by step and the tutorials are best for the products like this i have ever seen so , it won't be any problem in setting up.
For your kind concern we get DAW with every Focusrite product so, it isn't specially added by amazon so, you can even directly contact the seller and get the same product in lesser price than amazon .
The product was delivered in 2-3 working days, got no defect and working fine till now.
So, Thumbs up from my side to Focusrite scarlet solo (3rd Gen).
It's good for anyone and everyone.
But seriously you don't call scarlet beginners interface. It's easy to use that doesn't mean it beginners product.
Now, about the product. :
Pros:
1.) Build quality is really good. Better than the other options available in this price range.
2.) Easy to move knobs.
3.) Proper indication of everything.
4.) Audio quality is very good.
5.) Bundled software is really good to start working right out of the box.
Cons:
1.) Costly in India.
No separate volume control for headphone output. It is all linked.
Might be a better idea to go for the 2i2 instead.
As you can connect another instrument to channel 1 instead of only a mic. And you get the air function for both channels instead of just the mic channel. Also you get a separate volume control for the headphone output.
I can adjust, it serves my needs perfectly.




