Отзывы о Выпрямитель Rowenta SF 8210F0

This iron is amazing. I have been using black and decker or sunbeam for years. I have wanted to spend a little extra to purchase a Rowenta iron ever since I took a private sewing class and the instructor had a rowenta and it was fabulous with all types of materials. I used my DW5080 for the first time this morning. A pair of pants that I've had for almost a year, and I have never been able to get the pressed the way I like without sending them to the dry cleaner. Unfortunately, I think the chemicals the dry cleaner uses ruins my clothes faster, so I don't like to send items as much, especially if the label does not specify to dry clean. So I used it this morning, and with one pass through with the steam on medium, these pants were pressed and after wearing for two hours I still have a crease in the legs. I love this iron, from now on, I will purchase ONLY Rowenta,

This replaces a 10 year old Rowenta iron. THAT iron could steam the Titanic, and the steam was instant and consistent. Every time I stayed in a hotel, I would use the $19 piece of junk in this room and miss THAT Rowenta.

I loved that iron from the time I took it out of its box until its spectacular demise that ended with a circuit-breaker tripping 'POP'. THIS iron, even when on maximum steam settings, often has a 5 second lag before the steam starts. The steam is not consistent. The lag adds up when you are ironing a dozen shirts.

Not a terrible iron, but seconds after I took my previous Rowenta out of the box 10 years ago I knew I would have a Rowenta iron from then on. I have to say this one isn't much different than what I could buy for a third the price at the local discount store. Very disappointing.

This is the second Rowenta iron we purchased in less than 2 years. The reason I went with Rowenta in the first place is because it is supposed to be a solid, well made iron supposed to last for years. The first one developed significant rust in the water compartment within a few months. I had never seen that in an iron in my life. I use filtered water which is what I use in all irons. It got so bad that no amount of cleaning or solution fixed the problem. It had to be thrown out. I decided to go for a different model. While this one has not developed rust, it developed an electrical problem where it would not turn on all the time and now it has become useless. I’ve had cheaper irons last me for years and these 2 Rowentas have both lasted less than one year. This is not acceptable. Will never buy a Rowenta again.

I bought this to replace my old Rowenta iron, which I owned for over 20 years. I purchased it after reading product reviews on Amazon. After using it for several hours this morning, and am quite happy with the product. My one complaint is that the temperature setting is awfully easy to move by mistake with my right thumb as I shift positions while ironing and picking up the iron. It is a very lose control dial. I repeatedly had to turn the button back down to cotton when I felt the stalling one experiences when using an iron on too hot a setting. This was not a problem with my old Rowenta, but overall, I'd say that this is a good product. I am getting smoother results (fewer wrinkles) with this iron than I remember ever getting with my last iron.

I'm a quilter and I need a good, hot iron with steam. At first I loved this iron. I like a heavier iron to help iron my quilt blocks. However, after a year of use, it leaks like crazy! I can only put in a little water when I'm ready to steam or else it flows out the bottom. I have purchased several Rowenta, knowing they are supposed to be high quality and all have leaked eventually. So from now on, I'm getting the hottest and cheapest I can buy! Why spend big bucks for the name when it doesn't perform any better than the cheap ones?

I downgraded from the Roventa 1800w to the 1700w... miss the digital display... had problems with Roventa before... defect item and I guess the Germans don’t like warranties all that much... anyways, back to this product... it moves smooth and das get the wrinkles... 95%
It’s more cost efficient and needs less water as the other one... so that’s good... the Plug attaches amazingly well to the cord... a design that i have not seen before+++
Just make sure you keep all info... receipt, registration, etc. the Germans don’t like to give refunds or like to offer repair or replacement parts... so be prepared in case something goes wrong with it...
Its my third Roventa... if anything at all goes wrong and I don’t get their full support I will never trust this company again... so let’s hope 3 Times is the charm... I love the performance, but not in love with the company... that’s why only 4 stars

I love this iron so that being said I'm sure you're wondering why I gave only 4 stars.
Two things:
1. This iron works fantastic HOWEVER it must always have water and steam must always be on for the job to perform as I expect for the price I paid.
2. My knuckles constantly hit the dial controls. I am trying to not let that happen by being more aware but it still happens occasionally.
Those two things being said I still love my iron but thought for the price I would get a great iron without having to always put water in it. Another small thing which isn't really a huge deal, the fabric instruction guide listed on the bottom is useless as you cannot read it with the shine of the font and the color of the background they put it on. At certain angles you cannot see it so I just stopped looking at it. All in all I'm happy with this product but wish I could get a good iron without water. BUT with water this thing performs beyond expectations and extremely fast so I WOULD purchase this item again. Keep in mind this is the 1st expensive iron I have ever owned. I had a $20 iron for about 15 years and just got tired of spending all day ironing so this iron definitely makes the job fast. Maybe you can't really get a good iron without steam, lol, what do I know. Like I said this is my 1st expensive iron. So in the end I'll deal with the "adding the water" all the time because it cuts my time more than in half and does great job!

I had a Rowenta steam iron for approx. 23 years, it finally stopped working about a month ago. It was the top of the line iron at the time of purchase. The only problem I had with it was after it fell off the ironing board during an earthquake the temperature setting dial didn't work and the temperature was trial and error. So, I had to buy a new iron and of course it was going to be a Rowenta. Did extensive research on the top name brands comparing to the Rosenta DW7180 and reading reviews. The Rowenta DW7180 was the best value and I am very familiar with the brand. My old Rowenta had 10 steam holes the new one has 400, ironing is super fast, the water tank needs refilling more frequently. You want more steam going to need more water. Everything else is pretty much the same as the old one. However, I have to agree with other reviewers - the color of the fill tank is too dark to conveniently see the water level. A lighter color or clear would have been a much better idea. I used a measuring cup to determine how much water brings the level up to the maximum fill line. Solved that issue. I sew a lot so my iron is always ready to perform and iron anything wrinkled. I would recommend this iron to anyone who wants performance from an iron.

Love this iron. I had an old Rowenta iron that just wasn't working anymore. After ironing, my clothes looked as if I hadn't bothered trying. But I had the old iron for approximately 20 years. Long enough to be sold on the product. When I decided I couldn't put off getting a new iron any longer I went looking for a new Rowenta. I am not disappointed. This iron presses your clothes with very little effort and after wearing the item all day it still looks great!

I've had 4 previous Rowentas. They all leak. They all get weak in the spray control. However, they're the best iron out there and I have a business which provides products I sew. It's what I always come back to. I like the weight of them...it doesn't hurt my wrists like the "professional" irons. I like the steam feature. It needs to be filled constantly, though. I like the auto shut off. I like the cord. I like that it doesn't tip the way cheaper irons do. I have 2 nasty burn scars from irons tipping over, over the years. I love that it is self cleaning and pulls the crap out of the water.

The worst iron. I have no clue how it got such great product reviews. The ONLY good thing about it is the retractable cord and even that you need to push in yourself once it gets close to the iron. If you want to waste 45 mins on one cotton button down shirt and ironing the same spot back and forth for minutes on end, this is the iron for you! It’s absolute garbage. On its highest setting it will not get wrinkles out of anything. When you push the steam it shoots out white calcification particles. I cleaned it. Still no avail. Honestly I wish I didn’t throw away the box and used it more in the two months I had it but I cannot return it now. I don’t even want to donate it in fear of someone thinking they’ll get a good product. Believe me, I have read and re-read the instructions thinking I was doing something wrong, nope. This iron is the pits.

After reading the reviews, I was expecting to have to fill the water well every 2-4 pieces of clothing to be ironed. I guess when you get up to the heavy-duty cotton or canvas items that might be true. But most of my ironing is pretty much permanent press which just needs freshening or things I let sit too long in the dryer and got wrinkles. So, I didn't have that issue of running to and from my water source to refill. I did notice that it is easy (too easy) to come into contact with the push up the heat dial and I need to get used to my hands coming too close because this iron really heats up fast - which is great when you need it to. I found the spray and blast of steam buttons in a real good position for me. I'm right handed and have small hands and they are easy to use. Also, I have no issues with the water spilling or leaking - in fact the fill hole is easier than my old Black and Decker and there is a plug that sounds a click/plop when the fill hinge is shut All The Way. I think anyone whose iron leaks isn't closing the hinge completely since it does have a sealing plug built in - which I think is great. All in all, it's a fun iron to iron with (I actually don't dislike ironing - been ironing since I was 12 and find it relaxing -- and the new irons are so much better (and have steam features) unlike the ones I learned on over 5 decades ago. And the look of the iron is so cool - like some sort of futuristic car (but more affordable) .

I am a quilter. I love this iron. First thing I love is it’s not made in China. It is made in Germany but not all Rowenta are.
It’s a good weight. Even full of water. Heavy enough to help you iron but doesn’t tire your arm.
Makes copious amounts of steam. You are able to control the steam. Several hundred steam holes cover the whole bottom. Don’t have to iron with the edge to get steam.
Clear easy instructions. Long cord. Would love the cord to be retractable but it’s worth losing that feature to not have it China made.
I love it ! No complaints.
It was delivered on Sunday which was nice because I had to wait for it before I could continue sewing.
Thank you Rowenta. Feels like a quality iron.

Just received this today. Upon opening the package, I noticed what looked like blood smeared across the face of the iron. I tried to rinse it off, but it was hardened and would not go away after some serious scrubbing. I then turned the iron on full heat, let it sit for a moment and then tried to scrub the substance off once again. Despite this it still wouldn't come off. My main concern is that I have nice stuff, that's why I bought what apprared to be a very high-end appliance. I'm sure with the passage of time and extended use that substance will come off, but that'll happen as I'm ironing an expensive piece of clothing. To make a long story short, I'm returning this and going to a brick and mortar store to find a replacement. What really upsets me is that Amazon slapped a sticker on the outside of the box that the iron came in saying that it was inspected for quality!

A bit of a disclaimer. I am one of those people who love to iron. I starch and iron all of my husbands western shirts all the time. I have had many irons. I always just bought a cheap iron, but I finally decided to just get what I wanted. I love this iron. It cuts ironing time in half, and it works better than any iron I have every owned. It was definitely worth the money. The reason it works so well is the number of holes in the steam plate and the weight of the iron. I have a sunbeam that was reasonably expensive, but it only has seventeen holes in the sole plate for steam. The Rowenta has 400 holes for steam. It makes a huge difference. Now all I worry about is knocking it off on the floor and breaking it. Just go ahead and fork out the money for this iron. You will not regret it.

I have used Rowenta iron for years. The 1st one seemed to last forever. The 2nd one was defective and was returned and replaced by the store. It lasted approximately 3 years. The 3rd one less than 2 years. This current one for two uses. And then it started leaking. Leakage is the reason I am replacing my existing iron. It makes me wonder if their manufacturing standards are not what they used to be or did I get a refurbished iron. I am disappointed. I have tried American brands and never found one that compared to Rowenta with respect to the weight of the product and the amount of steam holes. I am going to look for another iron but it really is disappointing because Rowenta has been my go to for so many years. One change I do like is the grip on this iron. I have arthritis and it is easier to hold.

** Update: dropped from 2 to 1 star, based on horrible customer service delays in communication, “canned” responses & just overall lack of interest or concern about the failings in their product, much less maintaining a pleased & loyal customer base. It WAS a great iron for about 8 or 9 months, before the leaking problem started. It now has to be set in the sink when not in use, as it was soaking our countertops & cabinets. DO NOT BUY!

Ok, pretty sad now.... gotta go do same research I did a year ago for a great iron to replace what was the be-all-&-end-all. Thanks for nothing, Rowenta.

, add us to the people piling them to the trash after a year.... same problem where water started pouring out the bottom. This is not some $20 iron from target, for goodness sake, but the customer service reply was about what I would expect on something like that. Basically, “we could look at repairing it for about what you paid for the iron.” Really?! We don’t abuse the iron, we use it every day & maintain it appropriately, hence me biting the bullet & purchasing this “better” iron.... not impressed, Rowenta. Shame on you.

This iron does all the work. Because of its weight about 3 and 1/2 pounds. It pushes the wrinkles out pretty much on its own no pressure necessary. Love the fact that it shuts off in 8 minutes of non movement 30 seconds if you lay it down on the sole plate. If it falls on its side 30 seconds it's off. The only problem I'm having is the Blast of steam button inconsistent when you press it doesn't seem to do the blast of steam at times not sure why. I could very well be doing something wrong but I think anytime you push that button steam with blast out of it. This iron was made in Germany you can tell the great quality. Is iron must be primed read the instructions. In my case I couldn't understand them just pictures. I called customer service they are more than happy to walk me through the steps of priming this iron. And keeping it clean and proper steps at the end of ironing.

Best iron I have ever owned. I'm terrible at ironing pleats in my slacks. This does the job! If I put the pleat in the wrong place, I can rearrange the slacks, re-iron, and the old pleat is ironed out and the new pleat is perfect. I can do all my ironing at once, hang clothes in the closet, and they are ready to wear even a week or more after ironing!

My only complaint is that it is easy to accidentally move the dial, making the iron much hotter (or cooler) then you need for the item you're ironing.

I am an avid sewer and my old Rowenta was well worn and loved. It started leaking so I ordered this one. It had pretty good reviews on Amazon and other sites I checked. The first one delivered had a badly cracked water housing out of the box. Amazon replaced it immediately. The second one arrived in perfect condition. I used it for the first time yesterday and I have to say, it blows the old one away. The burst of steam is very powerful. I wasn't expecting it and nearly burned my hand. It also gets hotter than my old iron. It is a fantastic iron if you make clothing or in my case handbags. The precision point, the strong burst of steam, the high heat, and the safety features made me fall in love with this iron in one day!

It has a good solid feel. Like auto shut-off but would be good with power (on/off) button. Alas, iron drips from steam holes, a little bit I was hoping for none. Sole plate “browned” almost immediately after using spray starch. It was difficult to clean.

Love this iron. This model replaced a previous Rowenta which had begun to sputter water when using steam. So after reading up on the latest irons, I decided this one had everything I wanted and, in general, Rowenta makes a good iron. I have been very pleased with its operation and ease of use. I like the weight of the iron because while having some heft for easier ironing, it doesn't cause my arthritic hands to hurt. Also, with a little bit of weight I don't need to go over the same place several times to get the wrinkles out. This is one reason I like the Rowenta.

If you need a good iron (even though I try not to iron if I can avoid it) I would suggest you try this one.

The nice features about this iron are its light weight and pointed nose. With its stainless steel soleplate, it glides very easily over fabric. What we don't like are the temperature dial and water receptacle and requirements for use. The dial is under the handle, and very close to it, so every time my husband picks up the iron, he inadvertently moves the dial. It moves very easily. It's not so much a problem for me because my hands are smaller, but it has happened and suddenly I'm ironing my polyester clothing on the linen setting! The directions that came with the iron say NOT to use distilled water. Instead, you MUST use tap water. The description on the website stated that you could use any water. That's not a problem but what bewilders me, and I find very inconvenient, is the fact that you must empty the water out after each use!

Read the reviews that say this iron leaks. And then believe them. I’ve had it for about three weeks and I’ve noticed water drops here and there. Today, when I picked the iron up, my ironing board was soaked. As I was ironing, water was dripping all over my son’s shirts. I had to go over them continually to get them to dry. The whole bottom of the iron was wet. Believe the reviews that say they leak - because they do! This iron will be returned within the hour. I have no luck with irons.