Отзывы о Оперативная память Thermaltake TOUGHRAM RGB 16 ГБ DDR4 DIMM (R009D408GX2-4000C19A)
260 отзывов пользователей o Thermaltake TOUGHRAM RGB (R009D408GX2-4000C19A)
Пользовались
Thermaltake TOUGHRAM RGB (R009D408GX2-4000C19?
Поделитесь своим опытом и помогите другим сделать правильный выбор
kyle johnson
08.01.2021
10/10
Оценка пользователя
Великолепно
There are a few one star reviews on Amazon that claim only one fan lights up when controlled by your motherboard. The reason for this is the people installing them did not know how to set up their motherboard software.
These fans have 4 physical ARGB wires 5v, ground, signal in, and signal out. What this means is that you have to tell your motherboard software how many separate LED's it is controlling if you daisy chain the ARGB signal wires. And that number is 9Xnumber of fans in the daisy chain. So 9 for one 18 for 2 and 27 for 3.
Once you set your software correctly these fans work great with the lighting effects flowing from one fan to the next, the same as it would flow down an ARGB light strip.
These fans have 4 physical ARGB wires 5v, ground, signal in, and signal out. What this means is that you have to tell your motherboard software how many separate LED's it is controlling if you daisy chain the ARGB signal wires. And that number is 9Xnumber of fans in the daisy chain. So 9 for one 18 for 2 and 27 for 3.
Once you set your software correctly these fans work great with the lighting effects flowing from one fan to the next, the same as it would flow down an ARGB light strip.
JAMES B
08.01.2021
8/10
Оценка пользователя
Хорошо
Liked that the included controller board was small, like a pack of gum unlike some other deck-of-cards-sized ones from other brands.
Note if you want to control the RGB from the motherboard not the controller, check the cables provided carefully. The included cable that they say is for Gigabyte boards, is 3 pins side by side that I think is an older standard that Gigabyte used.
I have a new release Gigabyte/Aorus motherboard to support the 3970X threadripper, and with this newer board GB seem to have fallen in line with the other manufacturers and use a 3-pin header with a gap between two of the pins. This means you need to use the one the instructions says is for MSI, ASROCK and ASUS boards. The pins on the motherboard are still labelled V, D and G. which correspond to the labels on the cable +5V, D and the ground-symbol respectively. It should be obvious as there is only one way to plug in the cable anyway, but thought I would mention it.
Note if you want to control the RGB from the motherboard not the controller, check the cables provided carefully. The included cable that they say is for Gigabyte boards, is 3 pins side by side that I think is an older standard that Gigabyte used.
I have a new release Gigabyte/Aorus motherboard to support the 3970X threadripper, and with this newer board GB seem to have fallen in line with the other manufacturers and use a 3-pin header with a gap between two of the pins. This means you need to use the one the instructions says is for MSI, ASROCK and ASUS boards. The pins on the motherboard are still labelled V, D and G. which correspond to the labels on the cable +5V, D and the ground-symbol respectively. It should be obvious as there is only one way to plug in the cable anyway, but thought I would mention it.
True Blue
08.01.2021
4/10
Оценка пользователя
Ужасно
I'm still working on my build, but so far, these seem to have been a pretty good choice... with one exception. The cords are EXCESSIVELY long. Until I bought these, the longest fan cords I'd ever seen were about 20 inches. These fan cords are twice that long... more than enough to reach from anywhere - to anywhere inside my case, with ample cord to spare! Normally, I wouldn't complain about this type of generosity. However, if you're concerned about cable management (which most people who buy these fans may be), these fans are going to prove to be quite the challenge. They could shorten the cords by 10-12 inches and still have plenty of length to reach across the interior of the largest computer cases I've ever worked with.
Edit: After struggling to come up with ways to route and conceal the egregious amount of extra cable attached to these fans, I’ve decided to knock another star off my review. Not only was the excessive cable difficult to deal with, the flimsy vinyl coated cloth sleeving tattered and ripped in multiple places, despite being very gentle with it during installation. Normally, I would re-sleeve cables that come with this type of sleeving, but I would have needed 42 feet of sleeving to do the 6 fans I bought, and it would have taken several hours to complete. The fans seem to be of good quality, and all of them worked as well as expected, but the thoughtless manner in which they were cabled was a deal-breaker for me. I would not purchase these again, nor would I recommend them to anyone who plans to do any cable management.
Edit: After struggling to come up with ways to route and conceal the egregious amount of extra cable attached to these fans, I’ve decided to knock another star off my review. Not only was the excessive cable difficult to deal with, the flimsy vinyl coated cloth sleeving tattered and ripped in multiple places, despite being very gentle with it during installation. Normally, I would re-sleeve cables that come with this type of sleeving, but I would have needed 42 feet of sleeving to do the 6 fans I bought, and it would have taken several hours to complete. The fans seem to be of good quality, and all of them worked as well as expected, but the thoughtless manner in which they were cabled was a deal-breaker for me. I would not purchase these again, nor would I recommend them to anyone who plans to do any cable management.
cydewaze
08.01.2021
2/10
Оценка пользователя
Ужасно
I build a lot of gaming rigs for friends, and a lot of them use Thermaltake cases. Some of those friends also want RGB, and I cringe, because Thermaltake cannot decide on a standard for RGB from case to case. I got these to add to a Thermaltake V200, but they're not compatible. No, these Thermaltake fans are not compatible with a Thermaltake case. Meaning they can't connect to the RGB control board on the case, so your only option is to use the remote that comes with the fans, BUT the 3 fans already on the case aren't compatible with that, so you'd have to have two controllers for one case. Silly. Also, the included adapter cable for ASUS motherboards does not match the header on any of the ASUS motherboards I've built.
So, these may work for you, or they may not. Roll the dice, or buy something else.
So, these may work for you, or they may not. Roll the dice, or buy something else.
Andrew F.
08.01.2021
10/10
Оценка пользователя
Великолепно
I ordered two sets (6 total fans) and was able to hook them all up in sequence and they had a single connector to my motherboard for LED control and two connectors for the PWM fan control. These fans are super quiet even when spinning up to handle more heat. There are times I wonder if my PC is even on (if it weren't for the LED's of course). They were super easy to install and don't require a motherboard connection for LED control but I can't say how well that works since I didn't have to use them. I would honestly suggest spending a little more money on these fans than some of the other LED brands that use either your reset button or a controller. Most of those brands don't have PWM control for fan speeds so if you have a decent system they will struggle to keep up with a hot system.
Drumlord29
08.01.2021
8/10
Оценка пользователя
Хорошо
I got these to replace the top 2 stock fans on my thermaltake label 20 HT and add some colors on my tower. The controller is different than the Pure plus 12, even the connectors are different. You would think they would use the same kind of connectors but they don't so I had to use the controller that came with it instead. Since I have other plans on my rgb header on my Asus motherboard, I had to figure out where to plug these on my motherboard. Here's how I got them to work.
1. Plugged them in series (as what the instruction said)
2. Used the 3 way splitter (which came with the kit) and plugged it on my Chassis fan plug on the motherboard for the fan power
3. Connected the controller (this enables me to change modes but have to open the side of my tower to access it. You can maybe set this outside your tower for easy access. My tower can easily be opened from the side)
4. Plugged the other end to a SATA cable for the rgb power
Plugging these on there CHA fan on the motherboard enables the system to increase and decrease the fan speed when needed.
My biggest disappointment was not being able to integrate with my existing controller from the Pure Plus 12 which has 5 inputs due to different plug types. If it was compatible, I would've been able to control them all with the TT software. Just a little hassle but does the job and looks great nonetheless.
1. Plugged them in series (as what the instruction said)
2. Used the 3 way splitter (which came with the kit) and plugged it on my Chassis fan plug on the motherboard for the fan power
3. Connected the controller (this enables me to change modes but have to open the side of my tower to access it. You can maybe set this outside your tower for easy access. My tower can easily be opened from the side)
4. Plugged the other end to a SATA cable for the rgb power
Plugging these on there CHA fan on the motherboard enables the system to increase and decrease the fan speed when needed.
My biggest disappointment was not being able to integrate with my existing controller from the Pure Plus 12 which has 5 inputs due to different plug types. If it was compatible, I would've been able to control them all with the TT software. Just a little hassle but does the job and looks great nonetheless.
Jennings
08.01.2021
10/10
Оценка пользователя
Великолепно
Let me start off saying these fans are really nice,, and the cabling is fantastic. They are very bright and pretty simple to connect without much issue. Most of the time you won't notice them running at all super quiet. That was the case for about two weeks until one of the fans started to make a hiss/rubbing noise. After some inspection, we were able to identify the problem. One of the fans on top of the case (exhaust) is the culprit. Not sure if the barring is failing or just a manufacturing issue, or what. I'm currently reaching out to Thermaltake to see if/what can be done about this issue. As of now, my rating is 3 of 5 stars based on my current situation. That rating will change once I hear back from Thermaltake.
Thermaltake is going to warranty the fan, it is on the way as we speak. Fantastic service.
Thermaltake is going to warranty the fan, it is on the way as we speak. Fantastic service.
jenksdrummer
08.01.2021
10/10
Оценка пользователя
Великолепно
I got a Thermaltake View 51 case; to which I have fitted 3 of these along the bottom and replaced the fans I had been using for my 360 CoolerMaster radiator, and 1 that is the back system fan.
These have a regular 4-pin PWM connector as well as a micro 3-pin connector that you can daisy chain with others in the series (for me, that these, plus the Pure 14 ARGB and Pure 20 ARGB). Under DC, they, as well as the 14-series, will work down to 40%. The 20-series work only down to 50%. Included are two different 5V ARGB leads that connect to the mini-connector that i mentioned earlier; this goes to your system board or splitter (which I use); or, you can use a micro-controller; which the 3-pack of Pure 12/14 series include; but the 20-series does not.
These have a regular 4-pin PWM connector as well as a micro 3-pin connector that you can daisy chain with others in the series (for me, that these, plus the Pure 14 ARGB and Pure 20 ARGB). Under DC, they, as well as the 14-series, will work down to 40%. The 20-series work only down to 50%. Included are two different 5V ARGB leads that connect to the mini-connector that i mentioned earlier; this goes to your system board or splitter (which I use); or, you can use a micro-controller; which the 3-pack of Pure 12/14 series include; but the 20-series does not.
ForrestA
08.01.2021
10/10
Оценка пользователя
Великолепно
So, put them in a Lian Li TU150 case, with an Asus MB (ROG Strix Z390-I Gaming) and they all worked together like a charm. Directly connected to MB, not using any TT controller. No issues, using Asus Armoury Crate to control all the RGB. Had to bump up the default CPU & Chassis fan profiles a slight bit as the CPU is a bit toasty in this case, but the GPU is doing great. (I am using Thermaltake watercooling also.)
Jovao do Santos
08.01.2021
10/10
Оценка пользователя
Великолепно
I love how these fans seamlessly sync with Aura Sync and Mystic Light. They have gotten a little loud for some reason, but that doesn't bother me. The light effects look very nice.
I didn't use the small controller that comes with them because I directly installed them to the addressable rgb header on my Asus x570 motherboard. I had them with my MSI x570 motherboard, too, but I changed them for the RGB version that connects to a controller that works with TT RGB plus.
The temps on my Level 20MT case and components are pretty good, I have 7 fans and 6 are these ARGB models. They do a good visual look and work great.
I didn't use the small controller that comes with them because I directly installed them to the addressable rgb header on my Asus x570 motherboard. I had them with my MSI x570 motherboard, too, but I changed them for the RGB version that connects to a controller that works with TT RGB plus.
The temps on my Level 20MT case and components are pretty good, I have 7 fans and 6 are these ARGB models. They do a good visual look and work great.
Matthew F
08.01.2021
10/10
Оценка пользователя
Великолепно
Before I bought these fans, I had three different fans in my case, all varying from airflow to noise. Now having these fans installed, I can hardly tell my computer is there and temps have stayed below where they were when I had the mixed fans installed. The RGB controller modes look sick and I'm glad I bought them!
Only thing that I overlooked and you should keep in mind is if you are looking to use the ARGB feature and connect them to your motherboard, make sure (at least in terms of ASUS) that you have the correct RGB header. My ASUS B350-F mobo has a 12v non-addressable RGB header and to take advantage of the ARGB, you would need a mobo with the 5v ARGB header. I was bummed about this but once I connected the included controller, I felt better with how many modes there are to choose from. Overall highly recommend if you need new case fans that look sick in the case!
Only thing that I overlooked and you should keep in mind is if you are looking to use the ARGB feature and connect them to your motherboard, make sure (at least in terms of ASUS) that you have the correct RGB header. My ASUS B350-F mobo has a 12v non-addressable RGB header and to take advantage of the ARGB, you would need a mobo with the 5v ARGB header. I was bummed about this but once I connected the included controller, I felt better with how many modes there are to choose from. Overall highly recommend if you need new case fans that look sick in the case!
jenksdrummer
08.01.2021
10/10
Оценка пользователя
Великолепно
I got a Thermaltake View 51 case; to which I have fitted 3 of these along the interior between the left/right chamber (officially can fit 3x120, but 3x140 will fit just can't use the top two screws)
These have a regular 4-pin PWM connector as well as a micro 3-pin connector that you can daisy chain with others in the series (for me, that these, plus the Pure 12 ARGB and Pure 20 ARGB). Under DC, they, as well as the 12-series, will work down to 40%. The 20-series work only down to 50%. Included are two different 5V ARGB leads that connect to the mini-connector that i mentioned earlier; this goes to your system board or splitter (which I use); or, you can use a micro-controller; which the 3-pack of Pure 12/14 series include; but the 20-series does not.
These have a regular 4-pin PWM connector as well as a micro 3-pin connector that you can daisy chain with others in the series (for me, that these, plus the Pure 12 ARGB and Pure 20 ARGB). Under DC, they, as well as the 12-series, will work down to 40%. The 20-series work only down to 50%. Included are two different 5V ARGB leads that connect to the mini-connector that i mentioned earlier; this goes to your system board or splitter (which I use); or, you can use a micro-controller; which the 3-pack of Pure 12/14 series include; but the 20-series does not.
Ryan G.
08.01.2021
10/10
Оценка пользователя
Великолепно
I have built a few computers recently and tried several different types of fans. These are my favorites of the ones I have tried. They run quietly, move air well, and look really impressive. They come with the controller but also support the various light control interfaces if your motherboard has one. This does not work with the JRGB 12V header, you must have a 5V such as the JRAINBOW 3 pin connector if you want to try and use your motherboard interface to control it. I thought my mobo had mysticlight, but I didnt look close enough when I ordered it and it didn't, so I ended up using the provided controller. I mounted it on the back by retrofitting one of the blank brackets in an empty slot. I would definitely buy these again if I needed RGB fans.
jenksdrummer
08.01.2021
8/10
Оценка пользователя
Хорошо
I got a Thermaltake View 51 case, which came with lesser versions of these with a proprietary connector and are not speed-controlled. These have a regular 4-pin PWM connector as well as a micro 3-pin connector that you can daisy chain with others in the series (for me, that these, plus the Pure 12 ARGB and Pure 14 ARGB). Under DC, they will work down to 50%. The 12 and 14 will work down to 40%. Included are two different 5V ARGB leads that connect to the mini-connector that i mentioned earlier; this goes to your system board or splitter (which I use); or, you can use a micro-controller; which THESE fans do not include; but the 3-pack of Pure 12/14 series DO.
MSA
08.01.2021
8/10
Оценка пользователя
Хорошо
Analog version, comes with a physical controller for the lights.
It should come with a Gigabyte and an ASUS/MSI sync cable, but mine came with 2 x Gigagbyte instead (OEM sent me a cable though to fix this).
Easy to install - like any other case fan.
VERY nice looking, quiet as well, even when turned up in RPMs.
if you are looking for more customization, go for the Premium version that can use the software instead of in-line controller.
It should come with a Gigabyte and an ASUS/MSI sync cable, but mine came with 2 x Gigagbyte instead (OEM sent me a cable though to fix this).
Easy to install - like any other case fan.
VERY nice looking, quiet as well, even when turned up in RPMs.
if you are looking for more customization, go for the Premium version that can use the software instead of in-line controller.
R.Bailey
08.01.2021
10/10
Оценка пользователя
Великолепно
Bought these for a new build and can say I am very pleased that they work excellent with good static pressure and the noise is outstanding and quite! The Argb worked flawless with my MSI mobo and the fans can be daisy chained together to make it bit easier to hook up. Also be aware the fan cables on these are insanely long! They could reach the moon! Also if you dont have a mobo with ARGB 5v headers these come with a control box to push buttons for different effects and if you have a phanteks case you can just add them in with current setups and change with the case.
Khashi
08.01.2021
10/10
Оценка пользователя
Великолепно
Pros: They push a good amount of air and stay pretty quiet.
Cons: Nothing in terms of performance, but the LEDs could saturate the fans a bit more (not really that bad to be honest).
Overall: These perform really well and have a good balance between noise and the amount of air they can push. If you can find them in stock, they are a steal at $57ish for a 3-pack with extras.
Cons: Nothing in terms of performance, but the LEDs could saturate the fans a bit more (not really that bad to be honest).
Overall: These perform really well and have a good balance between noise and the amount of air they can push. If you can find them in stock, they are a steal at $57ish for a 3-pack with extras.
kchartris
08.01.2021
10/10
Оценка пользователя
Великолепно
It's what it says it is. They work well, move a lot of air. (haven't used them with a radiator yet, but plan to update when I redo the system with them on the rads and not just as case fans.) They aren't super noisy, but also aren't super quite, then again I have them running pretty fast to cool a hot system, so YMMV. I like them, but please note, you can see the LEDs behind the fan blade hub if you are really looking at it, which is weird, but generally unnoticed. Other than that, nice and bright, good color effects. Be prepared, like with most of these kinds of fans, to have a bunch of wires to cable manage.
Eternal
08.01.2021
10/10
Оценка пользователя
Великолепно
I have a Cooler Master H500P, and the fan on them were dying with a year. I bought replacement fan and they die within 3 months. So I decided to buy ThermalTake 200m, and they are WAY better.
They spin at at Higher RPM and a lot quieter as well. (I'll upgrade as far as lifespan in the future)
The only issue I ran into with installing them into the H500P is that you have to mount them with only two of the corner making up to the case. Which is really more than enough but if you have the same case know that factor.
They spin at at Higher RPM and a lot quieter as well. (I'll upgrade as far as lifespan in the future)
The only issue I ran into with installing them into the H500P is that you have to mount them with only two of the corner making up to the case. Which is really more than enough but if you have the same case know that factor.
Erika
08.01.2021
10/10
Оценка пользователя
Великолепно
installation was a little tricky which is understandable because any rgb fan will have extra cables but once it's installed and fan speeds are set up correctly it looks really nice and sounds pretty quiet IMO. Finding places to store the cable was the only tricky part for me but it worked the first time I set it up and it is a much appreciated upgrade over my 3 120mm fan. Unfortunately I couldn't plug RGB into motherboard because I don't have JRainbow pins but the controller that comes with it is fine anyway. I would definitely recommend this product.
DenSanAZ
08.01.2021
10/10
Оценка пользователя
Великолепно
I have the Pure 20, 14, and 12 (200mm, 140mm, 120mm) fans. They work great with my MSI Mystic Light controller (I don't use the included controller). I recently changed from a mid-tower case to a full tower case, the full tower has one more fan than the old, and it's not as loud as my older case fans. They are plugged into the MB fan controller and even during heavy video game play, they aren't really that loud (that's subjective, I suppose).
The main reason I bought these was for the RGB effect, and I'm very happy with it (again, controlled by MSI MB)
The main reason I bought these was for the RGB effect, and I'm very happy with it (again, controlled by MSI MB)
Jais
08.01.2021
6/10
Оценка пользователя
Плохо
the fans and how they function are fine. RGB controller is lacking. I have a number of RBG controllers across 3 pc in the house, but this one lacks the variety all those cheaper ones offer. The one color i was using not available on this controller. Making this option moot since i will likely buy another control or a hub for it to get the color and patterns i want. Over all it's a good product for the price, and should work for most people. It was thew right price, sadly just not the right fit for my build. to lazy to pull them out so i will live with it.
Air flow is on par with the fans they replaced and a little quieter.
Air flow is on par with the fans they replaced and a little quieter.
SCOTT
08.01.2021
10/10
Оценка пользователя
Великолепно
Bought these to install into the Tower 900 case. Was simple to replace the top exhaust fans with these. The cables were long enough to reach both the Asus RGB header and the fan header using the three to one connector provided. The Asus Aura program identifies the fan LEDs as separate LEDs.
Tyson Nedron
08.01.2021
6/10
Оценка пользователя
Плохо
package arrived 5 days after the deadline, had no form of protective wrapping. Just a box rattling around in a bigger box.
It seems this seller has really been struggling to meet shipping deadlines lately.
The fan itself is unusual to me. I hadn't come across a fan powered by sata power cables and 5v headers. Without a 5v header, which seems to be only available on high end motherboard, the physical controller is the only method to change settings. This will likely require some very interesting cable management or removing a side panel to adjust the fan settings.
But unfortunately a very noticeable wobble is already apparent and I don't think the fan will last even 6 months. Pretty underwhelmed by this nearly $50 fan.
It seems this seller has really been struggling to meet shipping deadlines lately.
The fan itself is unusual to me. I hadn't come across a fan powered by sata power cables and 5v headers. Without a 5v header, which seems to be only available on high end motherboard, the physical controller is the only method to change settings. This will likely require some very interesting cable management or removing a side panel to adjust the fan settings.
But unfortunately a very noticeable wobble is already apparent and I don't think the fan will last even 6 months. Pretty underwhelmed by this nearly $50 fan.
Показаны отзывы 217-240 из 260.
