132 отзывов пользователей o Pro-Ject Phono Box MM
Пользовались
Pro-Ject Phono Box MM?
Поделитесь своим опытом и помогите другим сделать правильный выбор
- + Качество исполнения, функциональность, простота. Мой "Арктур" даже зазвучал по-новому, палитра звуков стала более насыщена, более естественна.
- - нет

- + Хороший усилитель
- - Нет

- + Хороший товар
- - Нет
- + Супер
- + Компактный, хорошая изоляция от помех
- - Блок питания импульсный, что для подобного устройства не есть хорошо, хотя экономит затраты производителям
- + компактный,удобный,неубиваемый.
- + Звук суховат по сравнению с более дорогими изделиями фирмы Pro-Ject
- - Суховат, простоват звук. Громкий щелчок...
- + Маленький и безпроблемный
- - Паспорт на англуйском
- + Тяжелый,приятно взять в руки! Сделан аккуратно. Звучит намного лучше встроенного в усилитель фонокорректора. Как будто мутное стекло протерли! Качество оцифровки приятно удивило. Цифровая копия конечно несколько хуже оригинала (А бывает иначе?:))) ),но лучше, на мой взгляд, чем большинство...
- + Качество звука, порт USB. Имея собственный фонокорректор в звуковой плате компьютера, всё равно пользуюсь этим, звук больше нравится у него. USB-порт дает возможность подключить его хоть к ноутбуку, для прослушивания и оцифровки виниловых альбомов.
- - Не выявлены, разве что цена не маленькая.


I purchased this turntable in the piano black on September 3rd, 2014, and was certainly looking forward to enjoying the next few years with my new turntable and record collection. Let me share what I encountered when the new table arrived.
1. The box is very small, and it is obvious this company took every shortcut possible in packing it, with the platter on the very bottom of the box where any dropping would totally damage the platter. The box and packing are minimal to say the very least, and it is certainly not double boxed.
2. The turntable paint is the product's best feature, beautifully painted, whatever color you purchase.
3. The instructions are not very well written and the part about the tiny screw and resolving the arm needs to be written a different way when discussing vertical tracking angle.
4. The platter mat is absolutely terrible, it is literally not worth 2 cents. The mat is so thin it's problematic just keeping it in place and any static on your record, and the mat sticks to the record. I have never seen such a pathetic, worthless mat furnished on any turntable at any price.
5. The cartridge furnished with the table is fine, no problems there, probably a good fit for this level of turntable. I would warn everyone, be VERY careful when removing the stylus cover, and especiallly putting it back on, if you need to put it back on for any reason. It clicks in the back and it's just so very easy to damage that stylus, so be warned, watch your step.
6. The armrest on the player locks the arm in with a slight click, which is fine, but the armrest gets in the way, when you move the arm towards the record. The up and down movement is just not comfortable and it will cause you to drop the arm, something you will have to get used to.
7. The pickup bar on the headshell is far too small, and you WILL drop the arm at some point in time, it's just too small and you have to grab it with two fingers to hold it. Unlike most turntables, you can't just reach under the pickup and lift the arm, it will jump right off your finger. This is a pretty serious shortcoming as you will see if you order this product.
8. The anti-skate weight and the 1" piece of fishing line is just not that great and usually the line is placed on the second notch and there is an angle when placed on the second notch, where the line can easily slip off, it's just not the best design to say the least.
9. The clear dust cover is very nice, with the Pro-ject logo on the top, it's always nice to get a nice dust cover with your turntable without paying $300.00 for it.
10. Unfortunately this is where things get very bad for the Pro-ject Carbon Turntable, the motor. The motor is held in place by two screws and a rubber band and cushioned by two small Sorbothane absorbers, designed to absorb AC motor vibrations, and unfortunately the entire configuration does not work, period. That motor transfers a very noticable hum/buzz that is clearly heard through the speakers the second the stylus touches the record. This hum/buzz can be heard on any quiet music passages, between tracks, on the lead in on every record, as well as at the end of the record. This design flaw is written about all over the Internet and Pro-ject has been completely redesigning the Debut Carbon with a new DC motor to control this terrible hum the AC motor introduces. Hemley Designs Ltd has worked on a kit and is supplying that kit at a cost of about $40.00, however there is NO kit for the Debut Carbon. Henley Designs Ltd is the UK Distributor for Pro-ject and they are located in Oxfordshire. I have spoken to Mr. Bill Rudolph, the Analog Manager for Sumiko Audio as well as Paul Greene, the Service Depart Manager for Sumiko. I suggested doing a swap, my hummi










Easy to use and works very well.


Лучшие цены сегодня на Pro-Ject Phono Box MM
График изменения цены Pro-Ject Phono Box MM
Обзоры и руководства на Pro-Ject Phono Box MM
Характеристи Pro-Ject Phono Box MM
Информация о характеристиках носит справочный характер.
Перед покупкой уточняйте характеристики и комплектацию товара у продавца