Отзывы о Кулер для процессора Deepcool GAMMAXX 200 V2
439 отзывов пользователей о Deepcool GAMMAXX 200 V2
Пользовались
Deepcool GAMMAXX 200 V2?
Поделитесь своим опытом и помогите другим сделать правильный выбор
этот кулер дает 60%- 63% лучшие tempure в 100%
в этом кулере используется лучшее качество трубы жары
и у него было низкое noice и
простота установки
Если любой купил этот кулер затем перейти голову
потому что этот кулер не будет доволен тем, как быстро вы
на холостом ходу: 35° с<БР />нагрузка: 69° с<БР />окружающая температура: 26-27° с<БР />
более 10° с улучшением по сравнению с боксового кулера<бр /><бр />установка немного сложнее, если мобо уже установлены в корпус. Вентилятор Сид +12В,г,р,б и смотрится хорошо.
и очень хорошо
Instead take off the fan from the heatsink, if you still can't put it on then take off one of the 2 black fan holding clips from the motherboard and attach the heatsink separately. Only then will you be able to put this on safely. Temps are alright, the stock paste is garbage. Buy some Arctic silver or cooler master paste instead.
since its been very long since I used such a cpu cooler
and I had already owned deepcool gamaxx 300
I thought why not since it was so cheap
but then I realised even though its cheap its tedious to mount it on AMD motherboards
but after I got the job done there was significant increase in temps my temps at highest are resting at 49 - 63 degrees celcius at max load
and on normal load its at 37-51 degrees
which is okay but very close to bad as long as it doesn;t touch 70 I'm fine or 80 for that matter
It may be a bit bulky, but it definitely does a good job of keeping the processor cool. For a budget friendly cooler with no blings, this fits the budget and MB. If you are looking for heavy duty cooler for top end gaming, you may like to stick to higher end coolers for better performance. But with the MB and the facilities I have on it, this cooler does a good job even when playing decent games without GPU.
Ordered this as a stop gap for H100i GTX which is going for a RMA for pump issue & temps at par with liquid cooling!
Pretty value for money.
RGB fan need a controller or 12v rgb pins port on your motherboard to run, sadly motherboard have only 5V pins, so can't check them.
Only gripe with the overclockers zone is that package wasn't sealed. No tape, nothing to secure unauthorised access to the box. Thankfully all the accessories was in the box & it's just a metal block with fans so not much to go wrong.
Processor : Intel Xeon 1231v3
Motherboard : ASUS H97 pro gamer
Stock cooler(underload) : 100°C
GTE V2(underload) : 65-70°C
Stock cooler(idle) : 55°C
GTE V2(idle) : 38°C
As seen above GTE V2 did a great job in cooling off my cpu. It's silent and looks cool even without leds.
Do check for RGB header on your motherboard for the led, older motherboards does not have one(yeah! i did this mistake 🤣)
And also check for height and width of your cabinet. GTE V2 is 129mm tall.
Maximum temperature under full and continuous load - 76℃.
Maximum temperature while gaming - 70℃ - 72℃.
Maximum temperature while running Prime95 small FFT torture test - 83℃ at 4 GHz all core. ( Stock cooler reached 92℃ with the same test at 3.8 GHz all core ).
All temperatures recorded in an ambient of 30-31℃. ( No air conditioner used ). Case I have is the Meshify C with 3 intakes and 2 exhausts, so there is plenty of airflow inside the case.
After a year of use, the thermal paste on the stock cooler had completely dried up. Have attached pic of the same.
Able to do a light OC of +100Mhz. Now my best cores can reach and slightly go beyond 4.4GHz while staying cool.
Idles at around 35-40℃ in a room temperature of 30℃ and reaches 50℃ while working and browsing.
Got a multi core score of 3679 and single core score of 501 on Cinebench R20. Stock cooler was able to get only 3405 and 476 pts.
RGB syncs nicely with Aura Sync on my ASUS motherboard. Pretty silent and fans are barely audible. Stock cooler used to be quite loud.
Cons : 1) Wish they had included a second set of fan clips for attaching a second fan.
2) Considering that this is a PC peripheral, Amazon at least needs to do a bubble wrap packaging. Mine was
just put inside a plastic amazon packaging and sent. Deepcool had pretty good packaging, hence
product arrived without any damage.
Got this for around 1.9k during prime day sale. Best bang for the buck.
Would suggest to go for the newer Gammaxx 400 Pro as it has more fins (hence more surface area) and 2 fans in push-pull by default for better cooling.
Stock IDLE temps - 36-40 degree celcius
OC IDLE teamps - 43-47 degree celcius
Stock Gaming temps - 57-60 degree celcius
OC Gaming temps - 68-72 degree celcius.
Wraith spire cooler is good unless you OC the cpu and live in a relatively colder climate. Else buy a cheap air cooler that does the jobb quietly.
Installation - It can take a long time to install this.
In The Box - Cooler itself,One small packet of thermal paste also known as heatsink compund or thermal grease,and the push pin screws,and the socket bracket
Temp reading Before - Ideal - 58
Load - 76
Temp reading After Installing this fan - Ideal - 43
Load - 61
with stock cooler in normal use cpu temp is between 50-60 degree and in just 1 min stress test cpu temp is on its peak point 100degree
after installation of deepcool cooler in normal use cpu temp is between35-40 degree and in 10 min stress test cpu temp is fixed on 60 degree
at this price range its one of the best cpu cooler
Even after using thermal paste which comes with it.
Warning-Remove fan first (screws) then assemble.Otherwise you may break your MB or fan.Refer youtube videos.
And after this temps gain 58 to 60 digree
On ryzen 5 3400g igpu
This cooler is worth it on this price range
Average of about60°c to 65°c but the problem is it is a little bit hard to install... Satisfied with the product at this price
I made them right , best Air Cooler for
Rs1400 , temp. Achieved were great 63°c max. Temp. For Ryzen 3600.😇😇😇😇😇😇😇😇😇😇🤩🤩🤩🤩🤩🤩🤩🤩
there's a nob in bracket to adjust it to lga 1156 to 775. Remove mortherboard from cabinet to put this cooler.
Does well in cooling the cpu.
quite better than stock.
But u need to take your time while installing it.
Best way to install this is to remove the motherboard and then install..





