35 отзывов пользователей o Metabo Строительный фен HG 20-600
Пользовались
Metabo Строительный фен HG 20-600?
Поделитесь своим опытом и помогите другим сделать правильный выбор
Why 3 stars & not 5?
This is a replacement for my first order of this item which was delivered in a similar flexible, soft-sided envelop and arrived broken into two pieces. Who knows where along the line from initial pick for shipment to delivery, but apart from the annoyance and disappointment of receiving damaged goods, Amazon made the return and replacement practically effortless.
Though packaged exactly like the damaged one, the replacement arrived in good shape, but closer inspection revealed that it is missing one of four small leveling set screws. While not a major problem to replace, it is the need to do so that is the issue and reason for the lower rating. This is a ding for lack of quality control rather than for performance.
A very few other reviewers of this insert were consistent in noting that their insert arrived with a variety of flaws or discrepancies. This made me suspect the quality control of the manufacturer, and that perspective has been sustained by the missing set screw and poor factory & shipping packaging. Amazon should share some of the criticism here for sending an easily damaged part in such a flimsy envelop.
Otherwise, the replacement appears to be in cosmetically original factory condition, flat, and it fits as intended. There are no apparent structural flaws other than the missing set screw.
However,it seems to me that the basic design of the insert along with its brittle pot metal-like material make it inherently vulnerable to being easily snapped in two if dropped, bent or stepped on under unfavorable conditions. I suspect that this insert will need to be handled with some degree of reasonable care in order to survive for very long in an active working environment.
Though packaged exactly like the damaged one, the replacement arrived in good shape, but closer inspection revealed that it is missing one of four small leveling set screws. While not a major problem to replace, it is the need to do so that is the issue and reason for the lower rating. This is a ding for lack of quality control rather than for performance.
A very few other reviewers of this insert were consistent in noting that their insert arrived with a variety of flaws or discrepancies. This made me suspect the quality control of the manufacturer, and that perspective has been sustained by the missing set screw and poor factory & shipping packaging. Amazon should share some of the criticism here for sending an easily damaged part in such a flimsy envelop.
Otherwise, the replacement appears to be in cosmetically original factory condition, flat, and it fits as intended. There are no apparent structural flaws other than the missing set screw.
However,it seems to me that the basic design of the insert along with its brittle pot metal-like material make it inherently vulnerable to being easily snapped in two if dropped, bent or stepped on under unfavorable conditions. I suspect that this insert will need to be handled with some degree of reasonable care in order to survive for very long in an active working environment.
Quality item
I really like this Dado insert. Its made from quality steel and has good weight to it. It fits my Metabo table saw perfectly and has the standard lock insert to secure the insert. I am very pleased would definitely buy from this company again
It is what it is
Plate is well built but how it's packaged and shipped is terrible. Arrives in less than new looking shape with finish scratches and some metal nicks. First one I returned as it was clearly used and returned before. Second arrived looking like it was used for floor hockey. At least it's straight with no functional damage. Both metabo and amazon share responsibility for not taking simple steps to protect items for shipping because usps will never care. 4 stars for plate and 1 star each to metabo and amazon.
Works but check the item if you don’t need it asap
Not sure if this was used, or if the Qi is just down right horrible. If I didn’t need this ASAP I’d return it. The finish on it is garbage but it works for my saw and unfortunately it’s what I need. If I had the time to my own I would but I don’t.
packaging
The product is very nice but the lack of packaging is the issue, the material came to me in a box with other product we purchased but guide plate was in a very thin zip lock bag it comes with set screws and they all came out rolled around and the treads I had to clean up to thread them in to the plate the screws must have been rolling around on the plate and the plate is all scratched up, maybe ship with the set screws in a separate zip lock bag and wrap the plate to cushion any bouncing
Poor quality
Pictured is how the throat plate came out of the box. It is just held to the casting with double sided carpet tape. No support to prevent the plate from coming into contact with the blade. I guess you get what you pay for.
Works great
Works great on the table saw and i didnt have to build one myself. if only they offered a zero clearance plate you could buy.
Poor craftsmanship
Was excited to finally get a dado plate for my saw; but.... Poor craftsmenship. Metal plate is not straight and protrudes causing a potential dangerous situation. Wood will get stuck on the lip.
Not perfect but does do the job for me as I use a crosscut sled
Great product with a slight slope once in the table saw and a slight drop down in thickness
OEM Factory Quality
Maybe a little pricey but metal good fit made for saw.
Prefect Fit
I've owned my Metabo table saw for over a year and have been unable to find this dado insert plate....until now. Perfect fit and made just as well as the insert plate that came with the saw. I will purchase again if I ever need to.
Perfect fit for my dado stack and table.
Fits perfectly!
Perfect fit for the Metabo HPT table saw
Perfect fit for the Metabo HPT table saw
Just what hubby asked for
My husband was thrilled
Not quality
It seems to fit and work fine however this is not a quality product. The finish is shoddy and it does not sit flush with my table. Again, it does fit but the exposed lip may present a safety hazard.
May have been used but marked new
Product seems to be in fair condition. Giving it three stars because it is marked as new, however I am missing two adjument screws and the paint is slightly scratched along edgedes.
It Fits perfectly in my Metabo Table saw
It fits perfectly in my Metabo table saw and my dado as well.
I would recommend this product.
Fits as it should
It fits.
Fits perfectly and works as it should.
Посредсвенная модель
- + Устойчиво стоит на задней поверхности, в руке удобный. Регулировать температуру удобно.
- - Быстро начал шуметь, наверно не прослужит долго. Стал на 200 грамм легче предшественника. Режим охлаждения довольно горячий- 80 градусов, у предыдущей модели было 25 градусов.
Был у меня фен Metabo he 20-600, который служил верой...
хорошая модель
- + 1 скорость это без нагрева
2 скорость поток воздуха не меняется, просто включается нагрев.
3 скорость начинает сильней дуть.
Немного некорректно пишут в характеристиках о работе фена, в целом фен понравился, посмотрим на дистанции.
Немного присутствует какие-то шумы пощёлкивание при работе, как будто что-то не зафиксировано внутри и болтается.
Отличная модель
- - Нет
На вид симпатичны качество хорошая дальше посмотрим как будет работать
Отличная модель
- + Оилично греет
- - Нет
Рекомендую
отличная модель
- +
Аппарат удобный в руке, не скользит. Плавная регулировка температуры. Можно использовать вертикально, установив на пол или стол. Корпус прочный.
- -
Провод короткий. Приходится использовать удлинитель, что не всегда удобно.
Очень хороший аппарат. Стоит своих денег. Изготовлен в Европе.
Показаны отзывы 1-24 из 35.
График изменения цены Metabo Строительный фен HG 20-600
Характеристи Metabo Строительный фен HG 20-600
| Основные характеристики | |
| Назначение : | подсушивание краски, размягчение покрытий, сварка пластика, удаление краски |
| Мощность : | 2000 Вт |
| Защита от перегрева : | да |
| Минимальная рабочая температура : | 80 °C |
| Максимальная рабочая температура : | 600 °C |
| Регулировка температуры : | плавная |
| Максимальный воздушный поток : | 500 л/м |
| Регулировка потока воздуха : | да |
| Вес : | 1.1 кг |
| Глубина : | 90 |
| Высота : | 240 |
| Ширина : | 120 |
| Насадки и комплектация | |
| Упаковка : | коробка |
| Дополнительная информация : | указан вес без сетевого кабеля, длина кабеля: 2.2 м |
Информация о характеристиках носит справочный характер.
Перед покупкой уточняйте характеристики и комплектацию товара у продавца








