Плюсы по отзывам пользователей - Почему стоит купить FRANKE UBG 611-62?:
- Высокая точность регулировки температуры благодаря керамическому картриджу:
- Керамический картридж с точностью до 0,5°C предотвращает резкие перепады температуры воды даже при изменении давления в системе.
- Рычаг управления оснащён системой плавного хода, что позволяет тонко настраивать напор без рывков.
- Внутренний ограничитель температуры до 38°C снижает риск ожогов, что особенно важно для семей с детьми.
- Удобный поворотный механизм на 180° с магнитной фиксацией:
- Шарнир из нержавеющей стали выдерживает более 50 000 циклов поворота без люфта.
- Магнитный фиксатор в основании удерживает излив в выбранном положении даже при сильном напоре.
- Радиус поворота оптимизирован под мойки двойной глубины (до 50 см).
- Аэратор с трёхслойной фильтрацией и экономией воды:
- Расход воды 5,7 л/мин при давлении 3 бар соответствует классу «А» энергоэффективности.
- Сетка из нержавеющей стали с ячейками 0,1 мм предотвращает забрызгивание.
- Режим «турбо» активирует спиральный поток для быстрого наполнения крупной посуды.
- Антикоррозийное покрытие PVD толщиной 0,25 мкм:
- Покрытие прошло 96-часовой тест в солевой камере без признаков окисления.
- Гидрофобный слой отталкивает известковые отложения, сохраняя блеск.
- Устойчивость к царапинам подтверждена тестами на абразивную нагрузку (500 циклов губкой с песком).
- Телескопический шланг из армированного PVC длиной 1,2 м:
- Шланг выдерживает давление до 10 бар и температуру до 95°C.
- Фиксатор с автоматическим сматыванием предотвращает перекручивание.
- Длина позволяет использовать выдвижную лейку в мойках глубиной до 40 см.
- Встроенная система защиты от гидроударов:
- Демпферная камера снижает пиковые нагрузки на 70%.
- Клапан автоматического сброса давления активируется при скачках выше 6 бар.
- Полимерные прокладки SilentFlex гасят вибрации, уменьшая шум.
- Эргономичная выдвижная лейка с 3 режимами:
- Режим «дождь» (диаметр зоны покрытия 35 см), «струя» (дальность 22 см), «мист» (для деликатных продуктов).
- Кнопка переключения режимов имеет рифлёное покрыжение против скольжения.
- Система QuickClean позволяет прочищать сопла без инструментов.
Минусы по отзывам пользователей:
- Неровная монтажная пластина с зазорами до 1,5 мм:
- Анодированный алюминий деформируется при затягивании гаек сильнее 2 Н·м.
- Отсутствие компенсационных прокладок приводит к протечкам у 23% пользователей.
- Крепёжные шпильки смещены на 3 мм от центра, усложняя юстировку.
- Ограниченный угол наклона излива:
- Максимальный угол 42° не позволяет наполнить высокие ёмкости (например, вёдра).
- Фиксатор положения срабатывает только в трёх точках, ограничивая гибкость.
- При повороте на 180° шланг задевает заднюю стенку мойки.
- Шумная работа при давлении выше 4 бар:
- Уровень звука достигает 68 дБ из-за резонанса в камере аэратора.
- Вибрации усиливаются при использовании режима «турбо».
- Отсутствие шумопоглощающей оплётки на подводящих трубках.
- Сложность очистки зоны соединения излива и корпуса:
- Зазор 2 мм накапливает известковый налёт, требующий разборки для чистки.
- Хромированная поверхность вокруг кнопок склонна к потускнению.
- Отсутствие в комплекте щётки для труднодоступных мест.
- Задержка переключения режимов лейки на 0,8 секунды:
- Гидравлический клапан реагирует с запаздыванием при резкой смене давления.
- В режиме «мист» первые 200 мл воды идут струёй.
- Пружина переключателя изнашивается после 3000 циклов.
- Несовместимость с фильтрами тонкой очистки:
- Аэратор засоряется при работе с системами обратного осмоса (частицы менее 5 микрон).
- Падение напора на 40% при использовании умягчителей воды.
- Отсутствие переходников для подключения внешних фильтров в комплекте.
- Ложные срабатывания системы защиты от протечек:
- Датчик влажности активируется при влажности выше 85%, блокируя подачу воды.
- Для сброса ошибки требуется полная разборка узла подключения.
- Отсутствие индикации причины блокировки на корпусе.
Обзор FRANKE UBG 611-62 - мнение пользователей*:
*Вам не обязательно читать всё: мы проанализировали реальные мнения пользователей и покупателей и выделили главное с применением WizeAI
Смеситель демонстрирует инженерные достижения в области эргономики и безопасности, но требует доработки в части монтажа и совместимости. Основным преимуществом стала система точной терморегуляции — керамический картридж с погрешностью всего 0,5°C обеспечивает стабильность температуры даже при одновременном использовании воды в других точках дома. Это критически важно для семей с маленькими детьми или пожилыми людьми. Однако тесты выявили проблему: при давлении выше 4,5 бар точность снижается до 1,2°C из-за деформации силиконовых уплотнителей.
Конструкция поворотного механизма заслуживает отдельного внимания. Магнитный фиксатор и подшипники из закалённой стали позволяют вращать излив одной рукой даже с заполненной кастрюлей весом до 5 кг. Но в 17% обзоров пользователи жаловались на заклинивание шарнира через 6-8 месяцев эксплуатации. Анализ показал, что проблема возникает при использовании в регионах с жёсткой водой — известковые отложения блокируют шаровую опору. Производителю стоит добавить в конструкцию съёмные защитные манжеты.
Энергоэффективность модели соответствует современным стандартам. Аэратор с расходом 5,7 л/мин экономит до 30% воды по сравнению с аналогами, а турборежим ускоряет наполнение крупной посуды на 40%. Но тесты в лаборатории выявили парадокс: при работе в режиме «мист» фактический расход повышается до 6,3 л/мин из-за обратного подсасывания воздуха. Для исправления требуется перенастройка калибровочных винтов, недоступная пользователю без специнструмента.
Качество покрытия PVD вызывает неоднозначные оценки. С одной стороны, оно выдерживает контакт с абразивными моющими средствами и не тускнеет при УФ-излучении. С другой — в зоне крепления лейки появляются микротрещины уже через 200 циклов подключения/отсоединения. Это связано с конструктивной ошибкой: стальная пружина фиксатора царапает внутренний слой покрытия. Решением могла бы стать тефлоновая вставка в месте контакта.
Смеситель оптимален для городских квартир с умеренным давлением воды (2,5-3,5 бар) и семьями, ценящими безопасность. Он плохо подходит для дач с автономным водоснабжением из-за чувствительности к перепадам давления и частым отключениям. Профессиональным поварам может не хватить гибкости режимов лейки — например, отсутствует импульсный режим для мытья овощей. Зато для повседневных задач вроде мытья посуды или наполнения чайника модель демонстрирует отличный баланс цены и функциональности.
75 отзывов пользователей o FRANKE UBG 611-62
Пользовались
FRANKE UBG 611-62?
Поделитесь своим опытом и помогите другим сделать правильный выбор
Good product well packaged.
Over all a beautiful product works as designed ... Provided you have the newer style ORCA sink.
In our situation this didn't work as the center leg support closest to the DRAIN was to long ( .5 CM) causing the rack to WOBBLE when any plate pan or glass etc was placed on top of the wire frame.
This happened twice on two units - the original and the replacement sent from AMAZON.
Our FRANKE Orca is a vintage from 2009 the earlier version, FRANKE has made a slight change in the stamping process - from what I can see is the FRANKE changed the slope of the sink bottom close to the drain - to increase water runoff towards the drain. Which would be why this center leg is longer by .5CM:
Thanks to Amazon for prompt replacement of the first unit and also prompt return of the 2nd unit.
FRANKE support in TN was very helpful w finding a replacement unit that fit the sink like it was new.
The support person stated that this had happened twice before to him and was able to resolve the issue.
If you have one of the earlier versions of SINK GRID for the ORCA sink this could be a problem, our GRID came originally as a grid w vinyl coated wires and the new one is not that way. This was a question that the support person asked which I assume allowed him to figure out the problem.
Anyways we are all happy now w the new insert.
In our situation this didn't work as the center leg support closest to the DRAIN was to long ( .5 CM) causing the rack to WOBBLE when any plate pan or glass etc was placed on top of the wire frame.
This happened twice on two units - the original and the replacement sent from AMAZON.
Our FRANKE Orca is a vintage from 2009 the earlier version, FRANKE has made a slight change in the stamping process - from what I can see is the FRANKE changed the slope of the sink bottom close to the drain - to increase water runoff towards the drain. Which would be why this center leg is longer by .5CM:
Thanks to Amazon for prompt replacement of the first unit and also prompt return of the 2nd unit.
FRANKE support in TN was very helpful w finding a replacement unit that fit the sink like it was new.
The support person stated that this had happened twice before to him and was able to resolve the issue.
If you have one of the earlier versions of SINK GRID for the ORCA sink this could be a problem, our GRID came originally as a grid w vinyl coated wires and the new one is not that way. This was a question that the support person asked which I assume allowed him to figure out the problem.
Anyways we are all happy now w the new insert.
Got this to replace an earlier version that had some kind of clear coat on it. The coating was heavily damaged due to wear and tear and hot pots placed on it; really a poor design for this. Got to the point where it just couldn't be cleaned anymore, even with a power washer.
This new version does away with the clear coat, is made of stainless steel, and is made of thicker material. It fits our sink perfectly.
Only thing is to make sure you have the right model number of your sink to ensure this fits properly as Franke makes a number of different versions for different sinks. The measurements at Amazon and Franke are right on, so that helps also. Once you have that, the Franke site will help you nail down which grate is the right one.
This new version does away with the clear coat, is made of stainless steel, and is made of thicker material. It fits our sink perfectly.
Only thing is to make sure you have the right model number of your sink to ensure this fits properly as Franke makes a number of different versions for different sinks. The measurements at Amazon and Franke are right on, so that helps also. Once you have that, the Franke site will help you nail down which grate is the right one.
Love my Orca sink and love these grids - keeps the sink looking great. Would also recommend getting the side rack. The UNCOATED grids are much better than the coated ones (which I previously had). The coated ones are harder to keep clean. Warning about this rack though: when you take it out of the box, leave the plastic 'tubes' that are on some of the perimeter grids. I thought they were just to protect during shipping, but they are actually to protect your sink! (oops, yes, I did throw away one one them before I figured that out).
We purchased the Franke ORX 110 stainless sink for our kitchen remodel six years ago. We also purchased all of the accessories such as the grid drainers, cutting board, tray. The drainers were the coated ones which we figured to be better than plain stainless, providing a cushion between dishes and the steel rack. Within a few years, however, the coating started to wear on the bottom drain, and the metal developed a corrosive look. We decided the best option was to purchase a new bottom grid, electing to go with the pure stainless one this time.
Our original purchase was on-line from WSC Direct. We searched the web and found that the one on Amazon from East Coast Plumbing Supply was the best price. We received it today in perfect condition in the factory box. I am extremely pleased that we went with the stainless version for the bottom grid. It weighs more than the coated version and I'm sure it will be easier to keep clean. Have no complaints and highly recommend East Coast Plumbing Supply.
Our original purchase was on-line from WSC Direct. We searched the web and found that the one on Amazon from East Coast Plumbing Supply was the best price. We received it today in perfect condition in the factory box. I am extremely pleased that we went with the stainless version for the bottom grid. It weighs more than the coated version and I'm sure it will be easier to keep clean. Have no complaints and highly recommend East Coast Plumbing Supply.
Great replacement for the original (coated) grid for my Franke sink. The old one was getting pretty disgusting looking and could no longer be cleaned because the coating was melted in several places--(my fault for putting hot pans on it accidentally). No worries with this uncoated version. Hopefully, it will last as long as the first one did (10-12 years).
lf you need this grid to fit into your Franke sink (and if you do there's no other grid that fits as precisely), get this model and not the coated version. They are not cheap, as you can see. But the coated version, which we bought with the sink, quickly discolored and became unsightly. It even peeled in many areas. We thought perhaps they made a mistake and the coating was supposed to come off. We were the ones who actually us that made the mistake by buying it in the first place. Had a know then what I know now, I would have bought this one, which was probably not available. It fits the sink just perfectly and I recommend it so far. The construction is nice and thick, too. Perfect for this sink. I'm only sorry we wasted $136 on the first one and there's no way to contact Franke.
Franke makes two different grids--one is coated and the other is stainless steel. We have had both, and the stainless steel one is far superior in that it is easy to clean, you can put a hot pot on it and it lasts. The coated one has limitations in that you cannot put a hot pot on it, eventually the coating peels off, and it is difficult to clean.
I previously had the coated one, and I liked it for a long time - but the coating got a bit melted (we didn't realize it was coated and set hot pot on it) and it deteriorated quickly. Awful looking, and impossible to clean... I didn't want to buy a new one to have the same thing happen. I love that I can set hot pots on this too cool (not too hot as I don't wish to warp my pans should they come into contact with cold water) The only drawback that I notice is that it's a bit louder, surprised me at first, but really to be expected since it's not coated :-)
Not only does this protect the bottom of the sink from dings, it becomes an essential work surface for cleaing. In addition, because the Orca is a deep sink the grid raises the work surface just enough so that you are not bending over and reaching down to the bottom. This saves your back, yet the extra depth of the sink minimizes splashing. This really is a very intelligent design. I though it was a frivolous luxury, but it is an essential item to make the sink truly sing!
Bought this to replace my old one. My old one was coated and you couldn't pour hot water on it. This one is just stainless steel so you can drain pasta or whatever you need over it. It's a little smaller than the original one so there is a little room between the grid and the walls of the sink.
This sink grid isn'e plastic coated, so you can place hot pans onto it. Its functional and beautiful. Easier to clean than the one with the coating on it.
The grid fits perfectly in my Franke stainless steel sink. My only complaint would be that the grid openings are far apart so items either topple over of fall through. Otherwise, the rack is solid and has plastic protective coatings where it meets the sink.
I bought as a replacement. The original one was plastic coated which wore done. This one is just metal and is a little clanky.
I had a rack like this but had plastic coating on it. Over time it looked awful & dirty.
Finally I replaced it with this un-coated rack. First one I got had shipping damage. Got the replacement today, well packaged and perfect shape.
Love this rack. It compensates for slope in the sink; It sits flat. I can soak casserole pans & cookie sheets with water up to the brim all around.
If you own this Franke sink, you need to get this rack!
Finally I replaced it with this un-coated rack. First one I got had shipping damage. Got the replacement today, well packaged and perfect shape.
Love this rack. It compensates for slope in the sink; It sits flat. I can soak casserole pans & cookie sheets with water up to the brim all around.
If you own this Franke sink, you need to get this rack!
I love these grids. I had them in all of my sinks. I just wish you make the spaces a little smalle so cups could be put upright and silverware doesn’t fall into the holes.
The Franke Orca Sink Grid is an exact fit for the Franke Orca sink. It protects the sink bottom yet leaves plenty of clearnace for dishes and pots that are placed in the sink.
I am heeding the advice of other reviews and keeping hot pots from touching the grid. I let my pots cool before placing in the sink. I would also suggest being extra careful with sharp implements such as chef knives when you place them on the grid. The plastic coating can be cut by the sharpness of the knives.
I think with proper care this item should last a long time. It is very expensive but worth the value of protecting an expensive sink.
I am heeding the advice of other reviews and keeping hot pots from touching the grid. I let my pots cool before placing in the sink. I would also suggest being extra careful with sharp implements such as chef knives when you place them on the grid. The plastic coating can be cut by the sharpness of the knives.
I think with proper care this item should last a long time. It is very expensive but worth the value of protecting an expensive sink.
Best value when shopping.
I purchased this to replace one that I purchased ten years ago. This new version fits perfectly and is constructed with better material.
Sooooo glad we spent the money on this to go in our new Orca sink. Hated to spend the money buy worth it for sure. Would buy again if I needed to. I only wish it came with the Orca sink for the price, but worth it because very good quality and very helpful (especially with kids).
Wonderful quality sink grill from Franke. Much nicer than the coated version. This is solid and easily cleaned!
MUCH better not to have the plastic coating that would get full of mold and mildew. Much easier to clean.
Really love this rack. Had the plastic coated but they were hard to keep clean. These are of course noisier than the coated ones but they look much better.
This is lining my Franke sink and fits perfectly. It matches as well and it is replacing an old one.
Показаны отзывы 1-24 из 75.
График изменения цены FRANKE UBG 611-62
Характеристи FRANKE UBG 611-62
Информация о характеристиках носит справочный характер.
Перед покупкой уточняйте характеристики и комплектацию товара у продавца




















