21 отзывов пользователей o Felo 02073526, 35 предм.
Пользовались
Felo 02073526, 35 предм.?
Поделитесь своим опытом и помогите другим сделать правильный выбор
Эксопилот-9DNRT
07.12.2023
8/10
Оценка пользователя
Хорошо
Хорошая модель
- + Раньше использовал биты bosch, dewalt , теперь только felo
Скроменый эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
I picked these up for speed and because my old stand by pliar type strippers do not go below 18 AWG.
The depth measurement, though in metric, really helps with repeatability. Hint to adjust them easily pinch on the outside of the stop. I always end up going back between metic and SAE in projects so I've gotten I've to the depth. It may be handy for you to convert them and write it down on a card or something. This repeatability will save me a lot of time. I only have to measure the distance on one wire for a connector vs every wire on my pliar type.
I primarily use stranded wire, I've used these on speaker wire and various pvc coated primary wires so far. With zip wire and speaker wire, you will need to split it a bit more than with a plier type just to keep the other wire out of the mechanisms.
I used them on 20AWG to 10 AWG. I only nicked the copper one time because I went to fast. I only failed to strip with it when I tried to strip zip wire without separating them so I cannot count that against them.
Be aware the cutter is not the cleanest and it WILL NOT ACCEPT 10AWG.
The depth measurement, though in metric, really helps with repeatability. Hint to adjust them easily pinch on the outside of the stop. I always end up going back between metic and SAE in projects so I've gotten I've to the depth. It may be handy for you to convert them and write it down on a card or something. This repeatability will save me a lot of time. I only have to measure the distance on one wire for a connector vs every wire on my pliar type.
I primarily use stranded wire, I've used these on speaker wire and various pvc coated primary wires so far. With zip wire and speaker wire, you will need to split it a bit more than with a plier type just to keep the other wire out of the mechanisms.
I used them on 20AWG to 10 AWG. I only nicked the copper one time because I went to fast. I only failed to strip with it when I tried to strip zip wire without separating them so I cannot count that against them.
Be aware the cutter is not the cleanest and it WILL NOT ACCEPT 10AWG.
Скроменый эксперт
13.10.2020
8/10
Оценка пользователя
Хорошо
First off, don't sweat that this tool is made of plastic. It's fiber reinforced plastic and pretty tough. The built in cutter is nice for quick wire end leveling and clean up. No need to pick up another tool. The stripping mechanism is simple and works very well. The only reason I have to deduct 1 star is that anytime I set and use the strip length stop, the stripper never clears the spent wire casing. I have to stop to pluck it out. I'm using it on 16awg to 12awg tinned marine wire, so this type of wiring jacket may just be the cause.
Overall, it's still a great wire stripper, very light weight, and easy to line up and focus your cutting. Ergonomically speaking, hands down, its the best wire stripper design out there. If they could design in a spring lever to eject the wire casing on the return open, then it easily go Smithsonian level great.
Overall, it's still a great wire stripper, very light weight, and easy to line up and focus your cutting. Ergonomically speaking, hands down, its the best wire stripper design out there. If they could design in a spring lever to eject the wire casing on the return open, then it easily go Smithsonian level great.
Скроменый эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
I’ve been an automotive mechanic for 30yrs,and know quality tools.I had a similar blue point (snap on) wire stripper for years that work flawlessly until I borrowed it,and never saw it again.I purchased a few other similar design wire strippers,but the quality wasn’t there.I purchased this tool because it’s made in Germany,and not some third world country.So far it has outperformed all others I’ve used,will likely buy another to keep at the lake.
Скроменый эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
I used these today to strip some very short 12gauge wires in a box to pigtail using Wago Lever Nuts! I couldn't have done this without them, since I'm a DIYer. Also, it's hard to see the length indicator on the lever nuts, but knowing it's 11mm, all I had to do was to set it and go. I hope these hold up, but even if they don't I've saved the cost of having a professional come, so they were worth it. Make a great pair with the lever nuts.
The only downside is that they don't strip long enough pieces to make loops that fit around the screws in receptacles, etc. But still worth every penny.
The only downside is that they don't strip long enough pieces to make loops that fit around the screws in receptacles, etc. But still worth every penny.
Скроменый эксперт
13.10.2020
8/10
Оценка пользователя
Хорошо
Struggles to constantly clean strip 22 AWG. Does well on 16 and 18 AWG.
Does not cut into the wire on any of the three sizes I use most.
Small size and short pull distance of handle make this easy to use.
Does not cut into the wire on any of the three sizes I use most.
Small size and short pull distance of handle make this easy to use.
Скроменый эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
Fits into tight places and strips accurately. The depth setting is great and allows multiple consistent strips. Unlike some of the Klein strippers I have, it doesn't nick the wires.
Скроменый эксперт
13.10.2020
6/10
Оценка пользователя
Плохо
Not everyone wire stripping. One brand, one awg just different colors. One stripped good another only sometimes good.
Скроменый эксперт
13.10.2020
2/10
Оценка пользователя
Ужасно
Appeared a bit toy like so I was concerned about its durability. I have a number of Felo tools that get used regularly so I hoped it too would last. Well, it worked wonderfully for a couple months of very occasional use before the action broke. I only used it for repetitive tasks with small gauge wire. I tried contacting Felo for possible warranty replacement with no reply.
Скроменый эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
Once I saw the wire cutter was on top of the tool instead of directly under the stripper I was sold. Everyone that has seen me using this tool f-ing wants one. If you wire Electrical Panels treat your self and buy a pair of these. Every one of your co-workers will be asking you where to buy them selves a pair.
Скроменый эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
It's a better than that Irwin self-adjusting tool. It's compact, simple, easy to use, and seems to be tough. No downsides.
Скроменый эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
it works! Doesnt break, easy to use! Its out lasted other auto strippers in my bag. Dont be fooled by the light plastic feel. I hope this is the one that last and I won't need to buy another... ever
Скроменый эксперт
13.10.2020
8/10
Оценка пользователя
Хорошо
Great little strippers. They work perfect. Only issue I have is the cutter can be a little odd to use in some spots. Strips all sizes I use, everybody borrows them.
Скроменый эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
I very much liked this wire stripper. It is indeed very convenient. All you need to do it is set the strip length on the built in gauge and squeeze the handle. I have used it for up to 12 AWG solid and stranded wires. It has worked great for me for repetitively stripping to the same length. As a DIYer I come across such situations quite often. Much better than the standard wire strippers. And it is made in Germany!!!
Скроменый эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
I love these things ,I usually dont use these kinds of wire strippers,but these are awesome they adjust to the wire size up to 10 guage,just set your depth and go ,
Скроменый эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
Felo siempre cumple
Sus atornilladores y la serie 370 son una maravilla , este pelacable hecho para Felo por la alemana Jokari funciona muy bien aunque para algunos tal vez se sienta algo frágil, su regleta para medir el corte es aceptablemente precisa. Me voy contento con mi compra. La cortadora solo es para 12AWG/2.5mm o menor.
Скроменый эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
Excelente producto
Excelente calidad
Скроменый эксперт
13.10.2020
6/10
Оценка пользователя
Плохо
it does the work but it feels in hand like a toy.. but its very compact size and does the work
Скроменый эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
Producto de excelente calidad
Скроменый эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
I was intrigued by this stripper after reading the reviews. I couldn't work out how it was supposed to only strip the sheathing from a wire without damaging the conductors. Have used it for few days now, I have a better idea of how it does the job.
The head is a bit like a rodent's jaws. There are two vee-shaped teeth - one mounted on the top jaw, one on the bottom. As you squeeze the trigger, the jaws come together and the teeth bite into the cable sheathing. As you continue to squeeze the handles further, a cam mechanism inside shifts and starts to pull the top jaw back towards you. With the teeth biting into the cable sheath, the further you squeeze the trigger the more force is exerted onto the end of the sheath you are trying to remove, and after a certain point it just pulls away from the rest of the cable.
This whole process is a little bit of a balancing act because you have one action causing two effects. Squeezing the trigger causes the jaws to close AND the sheathing to get pulled off. However, the amount of force used is what dictates which action has more priority. If, for example, you squeeze just the top of the trigger, it is possible to pull the top jaw back without pulling the teeth together. If you squeeze too hard on the trigger too quickly, you can cause the jaws to bite too deeply through the sheath, into the conductors inside. So, it may take a little trial and error to find the right kind of pressure to match the thickness of sheathing on the wire you are stripping. With practice you can get repeatable, error free results without difficulty. I used it extensively on CAT5e and CAT6 for HDbaseT applications where it's very important you don't nick any of the conductors in the 24AWG pairs inside the external sheath. Once i got the pressure dialed in, I couldn't find any instances of the stripper nicking the pairs, and later testing of the cables seemed to bear this out.
Again, this stripper might not be for everyone, but it's a solid option for anyone who is open to learning how to best use it. Hope this helps some of you!
The head is a bit like a rodent's jaws. There are two vee-shaped teeth - one mounted on the top jaw, one on the bottom. As you squeeze the trigger, the jaws come together and the teeth bite into the cable sheathing. As you continue to squeeze the handles further, a cam mechanism inside shifts and starts to pull the top jaw back towards you. With the teeth biting into the cable sheath, the further you squeeze the trigger the more force is exerted onto the end of the sheath you are trying to remove, and after a certain point it just pulls away from the rest of the cable.
This whole process is a little bit of a balancing act because you have one action causing two effects. Squeezing the trigger causes the jaws to close AND the sheathing to get pulled off. However, the amount of force used is what dictates which action has more priority. If, for example, you squeeze just the top of the trigger, it is possible to pull the top jaw back without pulling the teeth together. If you squeeze too hard on the trigger too quickly, you can cause the jaws to bite too deeply through the sheath, into the conductors inside. So, it may take a little trial and error to find the right kind of pressure to match the thickness of sheathing on the wire you are stripping. With practice you can get repeatable, error free results without difficulty. I used it extensively on CAT5e and CAT6 for HDbaseT applications where it's very important you don't nick any of the conductors in the 24AWG pairs inside the external sheath. Once i got the pressure dialed in, I couldn't find any instances of the stripper nicking the pairs, and later testing of the cables seemed to bear this out.
Again, this stripper might not be for everyone, but it's a solid option for anyone who is open to learning how to best use it. Hope this helps some of you!
Скроменый эксперт
13.10.2020
10/10
Оценка пользователя
Великолепно
I don't know how I've lived without this fantastic tool all these years! I've had tons of others over the last 35 years, many of them as a car audio installer, but this one strips wire like nothing I've ever used!!!
I just finished wiring 7 Deutsch connectors for a Haltech Elite ecu that is in my Supra, and after the first 2 plugs (an 8 pin and a 10 pin), I had to find something that stripped wire easier and cleaner than my good old Blue Point crimper/cutter from the late '80's.
Bought this thing and literally in a few minutes, I had 60 wires cut and stripped (with the vinyl case on each wire still left on the end so the wire doesn't fray before I crimped each pin to it) with no issues at all! I've even used it to strip back the middle of a wire enough to do a military wrap without it nicking or breaking 14AWG wire, I just slid the stop all the way back and angled the wire in the cutting area to do so.
I think this stripper will be around long after I'm gone, unless the plastic housing falls apart or breaks, although it feels like a heavy-duty abs-type of plastic so it shouldn't be much of an issue.
I just finished wiring 7 Deutsch connectors for a Haltech Elite ecu that is in my Supra, and after the first 2 plugs (an 8 pin and a 10 pin), I had to find something that stripped wire easier and cleaner than my good old Blue Point crimper/cutter from the late '80's.
Bought this thing and literally in a few minutes, I had 60 wires cut and stripped (with the vinyl case on each wire still left on the end so the wire doesn't fray before I crimped each pin to it) with no issues at all! I've even used it to strip back the middle of a wire enough to do a military wrap without it nicking or breaking 14AWG wire, I just slid the stop all the way back and angled the wire in the cutting area to do so.
I think this stripper will be around long after I'm gone, unless the plastic housing falls apart or breaks, although it feels like a heavy-duty abs-type of plastic so it shouldn't be much of an issue.
Показаны отзывы 1-21 из 21.
Лучшие цены сегодня на Felo 02073526, 35 предм.
График изменения цены Felo 02073526, 35 предм.
Характеристи Felo 02073526, 35 предм.
| Общие характеристики | |
| Оснастка в комплекте : | биты |
| Аксессуары в комплекте : | держатель для бит |
| Количество предметов : | 35 шт. |
| Кейс (сумка) в комплекте : | да |
| Биты | |
| Посадка бит : | 1/4" |
| Количество бит : | 35 шт. |
| Тип бит : | удлинённые |
| Шлицы бит : | Torx (T/TX) |
Информация о характеристиках носит справочный характер.
Перед покупкой уточняйте характеристики и комплектацию товара у продавца
